Setting the clock
1
2
3
4
1
2
3
Connect the speaker cables.
Connect the MW antenna.
Connect the power cable of the system.
Tip
See the User Manual for how to
connect other equipment to this
system.
R
L
LOW CH
– +
HIGH CH
R
L
8
FM ANT
LOOP ANT
5
In standby mode, press and hold CLOCK. The clock digits for the
hours flash.
Adjust the VOLUME control knob or press VOLUME
3/4 on the
remote control to set the hours.
Press CLOCK again. The clock digits for the minutes flash.
Adjust the VOLUME control knob or press VOLUME
3/4 on the
remote control to set the minutes.
Press CLOCK to confirm the time.
FWM185 QSG_Eng 2007.3.22, 16:072