2. Computers & electronics
  3. Audio & home theatre
  4. Home audio sets
  5. Philips
  6. MCM700/12
MCM700/12

Philips MCM700/12 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Philips MCM700/12 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MCM700
What’s in the Box?
You should find these items upon opening the box.
FM antenna
Quick start guide
Remote Control
Pull out the plastic
protective sheet
before use.
1
Quick Start Guide
2
User Manual
Quick Start Guide Control cableUser Manual
MCM700 QSG_Eng 2007.3.8, 13:311
Tip
See the User Manual for how to
connect other equipment to this
system.
1
2
3
4
In standby mode, press and hold CLOCK on the remote.
When the hour digits flash, turn VOLUME-/+ on the system or press VOL+/- on the
remote to set the hours.
Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or
press VOL+/- on the remote to set the minutes.
Press CLOCK again to confirm the time setting.
1
2
4
3
Connect the speaker cables.
Connect the FM antenna.
Connect the control cable.
Connect the power cord of the system.
Speaker
(right)
Speaker
(left)
FM antenna
AC power cord
Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON
2
on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the procedures below.
MCM700 QSG_Eng 2007.3.8, 13:312
4
3
2
1
Playing a disc
Press SOURCE on the top of the system to select DISC or press
DISC on the remote.
Press ç to open the CD compartment.
Insert a disc with the printed side facing up. Press ç again to close
the compartment.
Playback will start automatically. If not press ÉÅ.
To stop playback, press 9 .
5
PDCC-JS/JW-0711
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
C Royal Philips Electronics N.V. 2007
All rights reserved.
MCM700 QSG_Eng 2007.3.8, 13:313
/