Step A
Setup
AC power cord
FM wire antenna
Speaker
(right)
Speaker
(left)
AM loop antenna
1
2
3
1
2
3
For radio reception, connect the supplied MW antenna to the
AM aerial terminal.
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the
AC power outlet.
Tip
It is unnecessary to
connect the FM pigtail
antenna since it is fixed
to the main unit.
Connection
5
1
2
3
In standby mode, press PROG/CLOCK button.
The clock digits for the hours flash.
Press ¡1 / 2™ to set the hours.
Press PROG/CLOCK again. The clock digits for the minutes flash.
Press ¡1 / 2™ to set the minutes.
Press PROG/CLOCK to confirm the time.
4
Setting the clock
AUX
-
IN
MC108MICRO SY STEM
iR
PROG/CLOCK
FM wire antenna
MW loop antenna
AC power cord
Right speaker
Left speaker
MC108B_79 QSG_Eng 14/2/07, 11:242