Rimage Catalyst Mail Slot Operating instructions

Rimage
Brand
Rimage
Model
Catalyst Mail Slot
Type
Operating instructions
Installing New Catalyst Mail Slot Slide
Before you begin:
• No tools are required for this procedure
• Power off the Rimage Catalyst autoloader prior to beginning this process
Remove old slide
1) Gently push the back plastic tab below the existing mail slot slide to unseat the pivot point from
the system
2) Pull mail slot from system
Remove diverter from existing slide
1) Press tabs on under side of slide and push diverter to remove it from the slide
Install diverter into new slide
1) Insert diverter onto the new slide, being sure to align lower tabs to the under side of the slide
2) Push until upper tabs lock into place
Install new mail slot slide
1) Set the new front mail slot pivot into system
2) Gently flex the plastic near the back pivot to seat into the system
3) Manually lift the slide to be sure the slide pivots and drops back into default position correctly
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Rimage Catalyst Mail Slot Operating instructions

Rimage
Brand
Rimage
Model
Catalyst Mail Slot
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents