2. V-ZUG
  3. 923

V-ZUG 923 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the V-ZUG 923 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are the required voltage, current type, and fuse rating for the V-ZUG 923 refrigerator?
    What are the ventilation requirements for the refrigerator?
    What are the dimensions of the overhead cabinet?
    What are the positioning options for the refrigerator?
    How do I install the refrigerator?
    How do I change the door opening direction?
Installation instructions
Royal KR 60i Refrigerator
Built-in EURO 60
J923.051-1
26.1.12 WIMA
7
These installation instructions apply to the model: 923
➤ Information on the necessary mains voltage, type of current and fuse protection can be taken from the identification plate.
Validity
Electrical connections
Built-in, integratable door
* Allow a gap – at the top and bottom – less than the width of the appliance to ensure proper ventilation (sheets 5–13 in the technical
guide on kitchen planning and design from the Swiss Kitchen Association (KVS)).
Shadow gaps alone – even if extended over several elements – are not sufficient.
min. 200 cm²min. 200 cm²
==
100
120
105
2/6
4/6
16–20
1.51.51.51.5 1521
min. 50
min. 50
2/6
Ventilation cross-section *
Wall unit
+2
0
Niche 1524 = 12/6
Door panel width with 3 mm gap
Niche 1524 = 12/6
+2
0
1850 (SMS norm) flush-mounted power socket, type 13
Positioned BELOW
also possible
Positioned ABOVE
standard
Appliance 1522
Door panel
Installation instructions
Royal KR 60i Refrigerator
Built-in EURO 60
J923.051-1
26.1.12 WIMA
8
➤ Push the appliance into the niche. Secure to the cabinet with 1 screw (included in the scope of delivery) through each hinge. Then
secure the appliance to the cabinet at the top with 2 chipboard screws each (included in the scope of delivery) through the fixing bar.
➤ Installation according to the operating instructions supplied with the appliance.
Installation
The door opening can be changed from right to left up until the point when the appliance is installed in the niche.
16–20
~602
200
100˚
max. 594
1524+2a
A
430
Niche
560–568
Niche
550
Appliance
548
Ventilation
For door panel thickness
greater than 20 mm, see
H7.0314
Filler strip H7.1754
(request when ordering
appliance)
Detail A
Door panel
Appliance
545
/