Configuring a Domain Profile 258
Configuring H2QP Profiles 258
Configuring an Operator-friendly Profile 258
Configuring a Connection Capability Profile 258
Configuring an Operating Class Profile 259
Configuring a WAN Metrics Profile 259
Configuring a Hotspot Profile 259
Creating a Hotspot Profile 260
Associating a Hotspot Profile with an Advertisement Profile 261
Enabling a Hotspot Profile on a WLAN SSID 262
W-IAP Management 263
Configuring LED Display 263
In the Dell W-Instant UI 263
In the CLI 263
Backing up and Restoring W-IAP Configuration Data 263
Viewing Current Configuration 263
Backing up Configuration Data 263
Restoring Configuration 264
Converting a W-IAP to a Remote AP and Campus AP 264
Converting a W-IAP to Remote AP 264
Converting a W-IAP using CLI 266
Converting a W-IAP to Campus AP 267
Converting a W-IAP to Standalone Mode 267
Converting a W-IAP using CLI 268
Resetting a Remote AP or Campus AP to a W-IAP 268
Rebooting the W-IAP 268
Monitoring Devices and Logs 271
Configuring SNMP 271
SNMP Parameters for W-IAP 271
Configuring SNMP 272
Creating community strings for SNMPv1 and SNMPv2 Using Dell W-Instant UI 272
Creating community strings for SNMPv3 Using Dell W-Instant UI 272
Dell Networking W-Series Instant Access Point 6.2.1.0-3.3.0.0 | User Guide Contents | 19