Edsal UR185 Assembly Manual

Edsal
Brand
Edsal
Model
UR185
Type
Assembly Manual

This manual is also suitable for

Edsal UR185 is a Steel Storage Rack with 5 shelves, a height of 72 inches, depth of 18 inches, and width of 36 inches. It is ideal for storing items in a variety of settings, including homes, offices, warehouses, and retail stores. The UR185 is made of durable steel and has a weight capacity of 1,000 pounds per shelf, making it suitable for storing heavy items. Assembly is easy and can be completed in minutes with the included instructions. The rack also comes with a limited lifetime warranty.

Here are some of the benefits of using the Edsal UR185 Steel Storage Rack:

  • Versatile: The UR185 can be used to store a wide variety of items, making it a great choice for both personal and commercial use.

Edsal UR185 is a Steel Storage Rack with 5 shelves, a height of 72 inches, depth of 18 inches, and width of 36 inches. It is ideal for storing items in a variety of settings, including homes, offices, warehouses, and retail stores. The UR185 is made of durable steel and has a weight capacity of 1,000 pounds per shelf, making it suitable for storing heavy items. Assembly is easy and can be completed in minutes with the included instructions. The rack also comes with a limited lifetime warranty.

Here are some of the benefits of using the Edsal UR185 Steel Storage Rack:

  • Versatile: The UR185 can be used to store a wide variety of items, making it a great choice for both personal and commercial use.
Safety Instructions
Safety Instructions
Safety Instructions
These units should be placed on a level surface. Failure to do so can result in poor product performance or create a possible
safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not included. Do not
use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY PART OF THE UNIT, OR
USE IT AS A LADDER. Evenly distribute the weight on each level and always keep the heavier loads on the bottom. Use care
when working with metal parts.
MODEL NUMBER (s)
UR185 - UR245 - UR60
D - Woodboard Shelf
C - Post
UR
UR
UR
-
-
-
185 5 Shelf
185 5 Shelf
185 5 Shelf
-
-
-
72”h x 18”d x 36”w
72”h x 18”d x 36”w
72”h x 18”d x 36”w
Description
A - Beams
B - Braces
C - Post
D - Woodboard
E - Post Cap
Qty.
10
10
8
5
4
Part Number
RUBE3502
RUBE1702
RUPT3602S
RPB21836
RL-PC
Part Size
35 7/16”
17 7/16”
36”
35 29/32”
N/A
General Instructions
General Instructions
General Instructions
Assembly is done with the rivets of the beams and braces fitting into the slots of the post. A rubber mallet may be used on the
beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block of wood be-
tween the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and fully engaged.
Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel free
to contact our Work Force manufacturing facility at, (773) 475-3000 and request customer service. We can also
be reached on the internet at the following email address : [email protected].
To obtain replacement parts, please provide the following information :
- Model # - Part # & Description - Location Purchased - Date Purchased
Consumer Products Division
Edsal Manufacturing Company
4400 South Packers Avenue
Chicago, IL 60609 www.edsal.com
A - Beams
B - Braces
UR
UR
UR
-
-
-
245 5 Shelf
245 5 Shelf
245 5 Shelf
-
-
-
72”h x 24”d x 48”w
72”h x 24”d x 48”w
72”h x 24”d x 48”w
Description
A - Beams
B - Braces
C - Post
D - Woodboard
E - Post Cap
Qty.
10
10
8
5
4
Part Number
RUBE4702
RUBE2402
RUPT3602S
RPB22448
RL-PC
Part Size
47 7/16”
23 7/16”
36”
47 29/32”
N/A
UR
UR
UR
-
-
-
60 5 Shelf
60 5 Shelf
60 5 Shelf
-
-
-
72”h x 18”d x 60”w
72”h x 18”d x 60”w
72”h x 18”d x 60”w
Description
A - Beams
B - Braces
C - Post
D - Woodboard
E - Post Cap
Qty.
10
10
8
5
4
Part Number
RUBE5902
RUBE1702
RUPT3602S
RPB21860
RL-PC
Part Size
59 7/16”
17 7/16”
36”
59 29/32”
N/A
Steel Storage Rack
E - Post Cap
Assemble two (2) post with one (1) brace. Skipping one slot
from the bottom of the post (see figure A), place the rivets
into post with the slot pointing down, and with the shelf ledge
of the brace facing up (see figure B). Tap lightly to seat riv-
ets. Repeat with two (2) post and one (1) brace. Assemble
the two (2) post units with two (2) beams (see figure C). Skip
one hole from the bottom of post, tap lightly to seat rivets.
Assembly Instructions for UR
Assembly Instructions for UR
Assembly Instructions for UR
-
-
-
185, UR
185, UR
185, UR
-
-
-
245, & UR
245, & UR
245, & UR
-
-
-
60
60
60
Start by adding a woodboard shelf to the level previously
built, then continue working by adding the second level
using two (2) beams and two (2) braces in the post slots
of your desired location. Again place the rivets of the
beams and braces into the post slots with the shelf
ledge facing up and tap lightly to seat the rivets.
IMPORTANT NOTE : Make sure all rivets are fully seated into the post slots.
IMPORTANT NOTE : Make sure all rivets are fully seated into the post slots.
IMPORTANT NOTE : Make sure all rivets are fully seated into the post slots.
Add a woodboard shelf to the previously built level, then
assemble the top post to the bottom post by using two (2)
beams and two (2) braces. One (1) rivet from each beam
and brace must be placed in the top hole of the bottom
post, and the bottom hole of the top post (see figure D).
After all beams and braces are in place, tap lightly to
properly seat the rivets.
Add a woodboard shelf to the previously built level, then continue
by adding the fourth and fifth level to the unit using two (2) beams
and two (2) braces per level. Tap lightly to properly seat the rivets
and add the final woodboard shelves to the unit. Install all four
(4) end caps to the top of the unit after assembly has been com-
pleted (see figure E). Install end caps to post by pressing down
on end cap at the three points illustrated above (see figure F).
Step
1
Step
2
Step
3
Step
4
Figure A
Figure B
Figure C
Shelf Ledge
Brace
Post
Woodboard Shelf
Top
Post
Figure D
Tap Lightly
Beam
Figure C
Tap Lightly
Woodboard Shelf
Note:
Post are
directional.
The slot
must point
down.
Post Slot Points Down
Note:
Post are directional. The slot
must point down.
Slot
Down
Bottom
Post
Top Of Unit
Press Down
Figure E
Figure F
  • Page 1 1
  • Page 2 2

Edsal UR185 Assembly Manual

Edsal
Brand
Edsal
Model
UR185
Type
Assembly Manual
This manual is also suitable for

Edsal UR185 is a Steel Storage Rack with 5 shelves, a height of 72 inches, depth of 18 inches, and width of 36 inches. It is ideal for storing items in a variety of settings, including homes, offices, warehouses, and retail stores. The UR185 is made of durable steel and has a weight capacity of 1,000 pounds per shelf, making it suitable for storing heavy items. Assembly is easy and can be completed in minutes with the included instructions. The rack also comes with a limited lifetime warranty.

Here are some of the benefits of using the Edsal UR185 Steel Storage Rack:

  • Versatile: The UR185 can be used to store a wide variety of items, making it a great choice for both personal and commercial use.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents