Omron 7300W User manual

Women’s Advanced

Automatic Blood Pressure Monitor

with Two Cuffs

Model Elite 7300W

INSTRUCTION MANUAL

ESPAÑOL

ENGLISH

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 1

2

Before Using the Monitor

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Operating the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Before Taking a Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Operating Instructions

Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Unit Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Display Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Irregular Heartbeat Symbol ( ) . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Movement Error Symbol ( ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Heartbeat Symbol/Hypertension Indicator ( ) . . . . . . . . . . . . . . .12

Average Value Symbol ( ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Setting the Medication Reminder Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Applying the Arm Cuff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Taking a Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Using the Guest Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Using the Memory Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Averaging Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

To Display the Measurement Values . . . . . . . . . . . . . . . . . . . . . . . . .31

To Delete All Values Stored in the Memory . . . . . . . . . . . . . . . . . . .33

Care and Maintenance

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Error Indicators and Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . .36

FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

TABLE OF CONTENTS

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 2

3

Thank you for purchasing the Omron

®

Elite 7300W IntelliSense

®

Women’s Advanced Automatic Blood Pressure Monitor.

INTRODUCTION

Fill in for future reference.

DATE PURCHASED: __________________

SERIAL NUMBER: ____________________

Staple your purchase receipt here

Your new digital blood pressure monitor uses the oscillometric method of

blood pressure measurement. This means the monitor detects your

blood’s movement through your brachial artery and converts the

movements into a digital reading. An oscillometric monitor does not need

a stethoscope so the monitor is simple to use.

The Elite 7300W comes with the following components:

• Monitor • Standard Arm Cuff • Large Arm Cuff

• 4 “AAA” Batteries • Stylish Zipper Case

• Instruction Manual printed in English and Spanish

• Quick Guide • Warranty Card • Cuff Guide

The Elite 7300W IntelliSense

®

Women’s Advanced Automatic Blood

Pressure Monitor is intended for home use.

While the Omron Elite 7300W is designed for women, it has also been

clinically proven accurate for all adults, regardless of gender. So you can

be assured that this product can be used by men and women.

SAVE THESE INSTRUCTIONS

Before Using the Monitor

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 3

4

To assure the correct use of the product basic safety measures should

always be followed including the warnings and cautions listed in this

instruction manual.

WARNING

Indicates a potentially hazardous situation

which, if not avoided, could result in death or

serious injury.

SAFETY SYMBOLS USED IN THIS INSTRUCTION MANUAL

CAUTION

Indicates a potentially hazardous situation

which, if not avoided, may result in minor or

moderate injury to the user or patient or

damage to the equipment or other property.

OPERATING THE DEVICE

Contact your physician for specific information about your blood

pressure. Self-diagnosis and treatment using measured results may

be dangerous. Follow the instructions of your physician or licensed

healthcare provider.

If battery fluid should get in your eyes, immediately rinse with plenty

of clean water. Contact a physician immediately.

People with severe blood flow problems, or blood disorders, should

consult a doctor before using the unit. Cuff inflation can cause

internal bleeding.

Read all of the information in the instruction manual and any other

literature in the box before operating the unit.

SAFETY INFORMATION

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 4

OPERATING THE DEVICE (continued)

This device is intended for use in measuring blood pressure and pulse

rate in the adult population. Do not use this device on infants or

persons who cannot express their intentions.

Inflating to a higher pressure may result in bruising where the cuff is

applied.

Operate the device only as intended. Do not use the device for any

other purpose.

Dispose of the device, components and optional accessories according

to applicable local regulations. Unlawful disposal may cause

environmental pollution.

Do not use a cellular phone near the device. It may result in an

operational failure.

Use only Omron authorized parts and accessories. Parts and

accessories not approved for use with the device may damage the unit.

Use only 1.5V alkaline batteries with this device.

Do not use other types of batteries. This may damage the unit.

SAFETY INFORMATION

5

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 5

CARE AND MAINTENANCE

Do not subject the monitor to strong shocks, such as dropping the unit

on the floor.

Do not submerge the device or any of the components in water.

Store the device and the components in a clean, safe location.

Changes or modification not approved by Omron Healthcare will void

the user warranty. Do not disassemble or attempt to repair the unit or

components.

SAFETY INFORMATION

6

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 6

7

BEFORE TAKING A MEASUREMENT

To ensure a reliable reading follow these recommendations:

1. Avoid eating, drinking alcohol, smoking, exercising, and bathing for

30 minutes before taking a measurement. Rest for at least 15 minutes

before taking the measurement.

2. Stress raises blood pressure. Avoid taking measurements during

stressful times.

3. Measurements should be taken in a quiet place.

4. Remove tight-fitting clothing from your arm.

5. Sit in a chair with your feet flat on the floor. Rest your arm on

a table so that the cuff is at the same level as your heart.

6. Remain still and do not talk during the measurement.

7. Keep a record of your blood pressure and pulse readings for your

physician. A single measurement may not provide an accurate

indication of your true blood pressure. You need to take and record

several readings over a period of time. Try to measure your blood

pressure at about the same time each day for consistency.

8. Wait 2-3 minutes between measurements. The wait time allows the

arteries to return to the condition prior to taking the blood pressure

measurement. You may need to increase the wait time depending on

your individual physiological characteristics.

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 7

8

KNOW YOUR UNIT

Main Unit:

Operating Instructions

Battery Compartment

Memory Button ( )

Display

Date/Time Setting

Button ( )

Air Jack

Start/Stop Button

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 8

KNOW YOUR UNIT

9

Components:

Arm Cuffs

Air Tube

Air Plug

(Connects to Air Jack)

Stylish Zipper Case

Four “AAA” Batteries

Instruction Manual

Women’s Advanced

Automatic Blood Pressure Monitor

with Two Cuffs

Model

Elite 7300W

INSTRUCTION MANUAL

ESPAÑOL

ENGLISH

Quick Guide

Thank you for purchasing the Omron

¤

Elite 7300W IntelliSense

¤

Women s Advanced Automatic Blood Pressure Monitor.

There are two cuffs included in this unit, standard size and large size.

This sheet simply explains how to choose the correct size cuff with Cuff

Guide. However, please read the instruction manual thoroughly before

using the unit.

1. Make a loop with your Cuff Guide.

2. Fit the looped Cuff Guide on your upper

arm.

3. Cuff Guide shows your correct cuff.

Use the cuff with same colored sticker.

QUICK GUIDE

5318770-0A

Use the Cuff Guide to get your

upper arm size, then choose

the right size cuff.

(9"-13")

Use the Cuff Guide to get your

upper arm size, then choose

the right size cuff.

(13"-17")

Use the Standard Cuff

Use the Large Cuff

Orange

Purple

Cuff Guide

Standard Arm Cuff

Air Tube

Air Plug

(Connects to Air Jack)

Large Arm Cuff

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 9

10

UNIT DISPLAY

Movement Error Symbol

Low Battery Indicator

Deflation Symbol

Heartbeat Symbol/

Hypertension Indicator

Irregular Heartbeat Symbol

Average Value Symbol

Memory Symbol

Pulse Display

Medication Symbol

Date/Time Display

Guest Symbol

Systolic Blood Pressure

Diastolic Blood Pressure

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 10

11

IRREGULAR HEARTBEAT SYMBOL ()

When the monitor detects an irregular rhythm two or more times during

the measurement, the Irregular Heartbeat Symbol ( ) will appear on the

display with the measurement values.

An irregular heartbeat rhythm is defined as

a rhythm that is more than 25% slower or

25% faster from the average rhythm

detected while the monitor is measuring the

systolic blood pressure and the diastolic

blood pressure.

If the Irregular Heartbeat Symbol ( )

displays with your measurement results, we

recommend you consult your physician.

Follow the directions of your doctor.

MOVEMENT ERROR SYMBOL ()

The Movement Error Symbol () is displayed if you move your body

during the measurement. Please remove the arm cuff, and wait 2-3

minutes. Take another measurement.

N

ormal H

ear

tb

eat

Irregular Heartbeat

Pulse

Blood

pressure

Pulse

Blood

pressure

Short Long

DISPLAY SYMBOLS

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 11

HEARTBEAT SYMBOL/HYPERTENSION INDICATOR ()

TAKING A MEASUREMENT

The Heartbeat Symbol ( ) flashes on the display during the

measurement. The Heartbeat Symbol ( ) flashes at every

heartbeat.

When the measurement is complete, the Heartbeat Symbol ( )

flashes on the display with your blood pressure and pulse rate if the

reading is above 135 for the Systolic Blood Pressure value and/or 85

for the Diastolic Blood Pressure value.

USING THE MEMORY FUNCTION

The Heartbeat Symbol ( ) flashes when the blood pressure

reading stored in the memory is above 135 for the Systolic Blood

Pressure value and/or 85 for the Diastolic Blood Pressure value.

AVERAGE VALUE SYMBOL ()

The Average Value Symbol () is displayed when you press the

Memory button ( ). The most recent average reading appears on the

display screen.

DISPLAY SYMBOLS

12

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 12

The American Heart Association recommends the following guideline for

upper limit of normal for home blood pressure readings:

AHA Home Guideline for Upper Limit of Normal BP

Systolic Blood Pressure 135 mmHg

Diastolic Blood Pressure 85 mmHg

This is a general guideline because blood pressure depends on

age and morbidity. The AHA recommends a lower home blood

pressure goal for certain patients, including diabetic patients,

pregnant women, and patients with renal failure

1

.

The monitor is not intended to be a diagnostic device.

WARNING

Contact your physician for specific information about your blood

pressure. Self-diagnosis and treatment using measured results may be

dangerous. Follow the instructions of your physician or licensed

healthcare provider.

Omron Healthcare recommends you contact your physician if the

Heartbeat Symbol ( ) flashes on the display with your measurement

values.

DISPLAY SYMBOLS

13

1

American Heart Association Scientific Statement 2004

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 13

1. Press the indicator on the battery cover

and slide the cover off in the direction of

the arrow.

2. Install 4 “AAA” size batteries so the +

(positive) and – (negative) polarities match

the polarities of the battery compartment as

indicated.

3. Replace the battery cover.

BATTERY INSTALLATION

14

Battery Cover

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 14

BATTERY REPLACEMENT

When the Low Battery Indicator appears on the display screen, turn the

monitor off and remove all the batteries. Replace with four new batteries

at the same time.

WARNING

If battery fluid should get in your eyes, immediately rinse with plenty

of clean water. Contact a physician immediately.

NOTES: • Turn the unit off before replacing the batteries. If the batteries

are removed while the unit is still on, the date and time will

be reset to that of the previous use. However, the

measurement results are not deleted.

• When the batteries are replaced, you may need to reset the

date and time. If the year is flashing on the display screen,

refer to “Setting the Date and Time”.

• The supplied batteries may have a shorter life.

CAUTION

Dispose of the device, components and optional accessories

according to applicable local regulations. Unlawful disposal may

cause environmental pollution.

BATTERY INSTALLATION

15

Low Battery Indicator

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 15

16

Set the monitor to the current date and time before taking a measurement

for the first time. If the date and time are not set correctly, the

measurement values stored in the memory and the average values may

not be correct.

The Blood Pressure Monitor automatically stores up to 84 individual

measurements values with the dates and times.

The monitor can also calculate an average reading based on the three

most recent measurements taken within 10 minutes.

NOTES: • If only two readings are stored in the memory for the

10-minute period, the average is based on the two readings.

• If one reading is stored in the memory for the 10-minute

period, this reading is displayed as the average.

1. TO STARTTHE SETTING

Press and hold the Date/Time Setting button

( ) to adjust the date and time.

The year flashes on the display.

SETTING THE DATE AND TIME

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 16

SETTING THE DATE AND TIME

2. SETTING THE YEAR

The year can be set between 2008 and 2030.

When the display reaches 2030, it will return to

2008.

Press the Memory button ( ) to advance by

increments of one year.

Press the Date/Time Setting button ( )

to set the current year.

The month flashes on the display.

NOTE: Press and hold the Memory button ( ) to advance the date and

time values faster.

3. SETTING THE MONTH

Press the Memory button ( ) to advance by increments of one month.

Press the Date/Time Setting button ( )

to set the current month.

The day flashes on the display.

17

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 17

18

4. SETTING THE DAY

Press the Memory button ( ) to advance by increments of one day.

Press the Date/Time Setting button

( ) to set the current day.

The hour flashes on the display.

5. SETTING THE HOUR

The time is set using AM or PM.

Press the Memory button ( ) to advance by increments of one hour.

Press the Date/Time Setting button

( ) to set the current hour.

The minute flashes on the display.

6. SETTING THE MINUTE

Press the Memory button ( ) to advance by increments of one

minute.

Press the Date/Time Setting button ( ) to turn the monitor off.

SETTING THE DATE AND TIME

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 18

RESETTING THE DATE AND TIME

To adjust the date or time after it has been setup when you first use

the unit.

Start with the monitor in the off position.

1. Press and hold the Date/Time Setting button ( ).

The Medication Symbol ( ) No.1 and the current setting (on or

oFF) will appear on the display.

Press the Date/Time Setting button repeatedly until the year flashes on

the display.

2. Refer to “Setting the Date and Time”.

The Medication Symbol ( ) No.1 and the current setting (on or

oFF) will appear on the display, after the minute has been set.

3. Press the START/STOP button to turn the monitor off.

NOTE: If you need to change the Date and Time, always adjust the

Date and Time setting before taking the next measurement.

SETTING THE DATE AND TIME

19

HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 19

The Medication Reminder Alarm can be set to sound twice a day to alert

the user to take a medication. The Medication Reminder Alarm can be

set for either AM or PM alerts. Only set the Medication Reminder Alarm

after the date and time has been set. The Medication Reminder Alarm is

set to off at the time of purchase.

NOTES: • Press the START/STOP button to stop the Medication

Reminder Alarm.

• The Medication Reminder Alarm will automatically stop

sounding after one minute.

• The Medication Reminder Alarm will not sound when the

monitor is taking a measurement.

1. TO START THE SETTING

Press and hold the Date/Time Setting

button ( ).

The Medication Symbol ( ) No.1 and the

oFF setting appear on the display.

SSEETTTTIINNGG TTHHEE MMEEDDIICCAATTIIOONN RREEMMIINNDDEERR AALLAARRMM

20

HEM-7300 e-s r2.qxd 11/5/07 12:48 PM Page 20

Page is loading ...

Omron 7300W User manual

This manual is also suitable for

Omron 7300W User manual

Related papers

Other documents