2. Health & beauty
  3. Blood pressure units
  4. RCP
  5. ADF-B180

RCP ADF-B180 User manual

  • Hello! I've reviewed the provided Quick Start Guide for the Blood Pressure Monitor ADF-B180. This guide includes important safety information, instructions on how to take a measurement and details about the device's ability to wirelessly transfer your readings to your healthcare provider. I'm ready to answer your questions about this device and its operation.
  • Can this device be used on babies or young children?
    Is this device suitable for individuals with serious arteriosclerosis?
    Can I take a blood pressure on either arm?
    Does the device send the readings to my doctor?
Wireless Arm Type Blood Pressure Monitor – Quick Start Guide
V2.0 REMOTE CARE PARTNERS PAGE 1
Wireless Arm Type Blood
Pressure Monitor
Quick Start Guide
Model # ADF-B180
NOTES ON SAFETY
• Do not use this device on babies, young children, or individuals who
cannot express their consent to take a blood pressure
measurement.
•
• This device is suitable for use by individuals 12 years old or older.
• Do not use this device on individuals with serious arteriosclerosis.
• Blood pressure readings may change during pregnancy. Pregnant
women should consult their provider before taking a measurement.
• Self-measurement is not medical treatment. If there are unusual
values, please consult your provider.
Taking a Measurement
Avoid smoking, eating, or exercising for 30 minutes before taking
measurements.
Do not allow other people to use your blood pressure monitor. The blood
pressure monitor is specifically assigned to you and you only. Allowing
other people to use your monitor can mislead your provider.
Unless otherwise instructed by your provider, you can take your blood
pressure on either arm.
Remove tight-fitting or thick clothing from your upper arm. The cuff should
be placed on bare skin.
Wireless Arm Type Blood Pressure Monitor – Quick Start Guide
V2.0 REMOTE CARE PARTNERS PAGE 2
1. Sit upright in a chair with both your
feet flat on the floor.
2. Pull on the end of the cuff until it
wraps securely around your upper arm.
Place your arm on a table with your
palm up so that the cuff is at the same
level as your heart.
3. Press the "START/STOP" button on the
device. The cuff will automatically
inflate, and the measurement will start.
Do not talk or move around while the
measurement is taking place.
4. When the measurement is complete,
the cuff will automatically deflate. Your
systolic & diastolic pressure values plus
your pulse rate will display on the Blood
Pressure monitor.
5. The readings will automatically be
transferred to the RCP SmartHub and
sent to your provider.
Understanding the Results
Normal blood pressure is 120/80 or less.
/