ABB AT3 User manual

Type
User manual

This manual is also suitable for

ABB AT3-7R is a programmable timer that allows for precise control and scheduling of various electrical devices. With its 7-day programming feature, you can create customized schedules for different days of the week, ensuring efficient energy management and automation of your home or workplace.

ABB AT3-7R is a programmable timer that allows for precise control and scheduling of various electrical devices. With its 7-day programming feature, you can create customized schedules for different days of the week, ensuring efficient energy management and automation of your home or workplace.

AT3
2CSM204225R0601
AT3-R
2CSM204235R0601
AT3-7R
2CSM204245R0601
System pro M
TIME SWITCH
INTERRUTTORI ORARI
INTERRUPTEURS HORAIRES
SCHALTUHREN
INTERRUPTORES HORARIOS
RELÓGIOS DE PROGRAMAÇÃO
Программируемый таймер
RU
P
E
D
F
GB
I
-1-
-
5-
-9-
-13-
-17-
-21-
-25-
Lighting
loads
250 V
Compensated fluorescent
tubes //
1
900 W 400 W
Technical specifications
Quartz movement
Type AT3: without running reserve, starts immediately after mains
connection.
Type AT3-R/AT3-7R:
72-hr. running reserve after being mains connected for 120 hours,
starts automatically a few minutes after mains connection.
Operating temperature range: – 10 °C to + 55 °C
Frequency: 50/60 Hz
Supply voltage: 220/240V AC
Power consumption: approx.. 0,5 VA
Contact rating:
- resistive load : 16 A 250 V~
- inductive load : 4 A 250 V ~ (Cos 0,6)
- squirrel cage motor : 1/2 HP 250 V ~
GB
Important:
Electrical equipment may be installed and assembled only by
qualified electricians.
Tungsten
lamp load
2
Setting the time
AT3, AT3-R (24 hr version):
Turn the programming dial in clockwise direction to set the time read off the
24-hour dial opposite the marking.
Turn the transparent dial with the minutes pointer to set the time
precisely (the transparent dial be turned in both directions).
AT3-7R (7-day version):
Turn the dial in clockwise direction to set the time and to the marking.
Then proceed in the same way as for the
AT3, AT3-R
.
Cycle
7 days
3
Program setting
Press inwards the segments on the program disk corresponding to the
selected switching periods.
Manual override
3-position selector:
0 = permanently OFF
= automatic programmed operation
I = permanently ON.
123
123
123
Function I :
segment set inwards
(red colour is visible).
Function 0 :
segment set outwards
(red colour not visible).
123
4 hour
2 hour
Min. interval between 2 actions
Program time per segment
Number of actions per cycle
24 h
96 84
15 min
30 min
Programming characteristics
4
Mounting
Dimensions
12
10
246
88,5
54
60
52
44 maxi
45
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

ABB AT3 User manual

Type
User manual
This manual is also suitable for

ABB AT3-7R is a programmable timer that allows for precise control and scheduling of various electrical devices. With its 7-day programming feature, you can create customized schedules for different days of the week, ensuring efficient energy management and automation of your home or workplace.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI