Panasonic TY42TM5G Operating instructions

TY42TM5G
Panasonic
Brand
Panasonic
Model
TY42TM5G
Type
Operating instructions

This manual is also suitable for

1
.................................................2
Terminal Board
Replacement Instructions ................................................3
Before attempting to assemble these accessories, please read these
instructions completely.
This is a combined Service manual for all the above models.
Terminal-Board
Anleitung zum Austausch ................................................4
Bitte lesen Sie vor dem Zusammenbau dieses Zubehörs die Anleitung
vollständig durch.
Diese ist ein zusammengefaßtes Wartungs-Handbuch für alle obigen Modelle.
Aansluitingenkaart
Montagehandleiding ...........................................................5
Lees deze handleiding volledig door voordat u de accessoires monteert.
Dit is een gemeenschappelijke montagehandleiding voor alle bovenstaande modellen.
Scheda per terminali
Istruzioni per la sostituzione ..........................................6
Prima di cominciare a montare queste parti componenti, leggere
completamente queste istruzioni.
Questo manuale di servizio contiene informazioni eistrzioni per tutti modelli sopraitani.
Carte de connexion
Instructions de remplacement .......................................7
Lisez attentivement ce document avant d’assembler les pièces.
Cet un mode d’emploi commun pour tous les modéles cidessus.
Tarjeta de terminales
Instrucciones para el reemplazo ...................................8
Antes del montaje de este accesorio, lea completamente estas instrucciones.
Éste es un manual de servicio combinao para todos los modelos indicados arriba.
Terminalkort
Instruktioner for udskiftning .........................................10
Læs hele denne vejledning grundigt, inden du samler dette tilbehør.
Dette er en kombineret Servicemanual, der gælder for alle de ovennævnte modeller.
Uttagsplatta
Bytesinstruktioner ..............................................................9
Läs noga dessa instruktioner innan du försöker montera dessa tillbehör.
Detta är en kombinerad servicebruksanvisning för samtliga modeller ovan.
............................................................................11
BNC Terminal Board
TY-42TM4Y
TQBC7062
RCA Terminal Board
TY-37TM4Z
TY-42TM4Z
RGB(digital) Terminal Board
TY-42TM4D
Scart /
Component Terminal Board
TY-37TM5T
TY-42TM5T
RGB Active through Terminal Board
TY-37TM5G
TY-42TM5G
Tuner Terminal Board
TY-37TM5H
TY-42TM5H
English
Deutsch
Français
Italiano
Español
Nederlands
Svenska
Dansk
Page is loading ...
3
English
2.
Installing desired Terminal Board:
(
Example : When installing Tuner Terminal Board
)
1. Insert the desired Terminal Board into the slot until
it is firmly plugged into the card connector.
• Make sure that the Board does not ride on the
two lower claws.
2. Secure using the previously removed screws or
those supplied with the unit.
Tighten screws in the numbered order 1
-
4 .
Side grip
Screws (x4)
Slot
Avoid riding on claws.
Terminal function label
(accessory)
1.
Removing the dummy cover or mounted
terminal board from display:
1. Remove the four screws that secure the Terminal
Board to the rear of the display.
2. Hold the Terminal Board by the side grip and slowly
pull it out in the direction of the arrow.
3.
Applying the terminal function label:
Peel off the backing sheet from the terminal function
label (accessory) and affix it over the existing label.
• Make sure that the label is affixed with the correct
position.
Have the customer keep the removed Terminal Board for future servicing needs.
( Example : When installing Tuner Terminal Board )
( Example : When removing RCA Terminal Board )
Precautions:
• Before installation
Turn the power switch off and pull out the plug.
Disconnect any plugs connected to the Plasma Display.
• When removing or installing the Terminal Board, exercise care to avoid injury.
There may be some sharp-pointed solder joints on the rear side of the Board that could cause unexpected
injury.
• When installing the Board, note the following point:
Fully insert the Board into the slot horizontally until it is firmly plugged into the connector. Note that
incomplete insertion may damage the internal components.
Place the Plasma Display upside down on a soft surface,
such as a foam mat.
•
Before proceeding with the replacement steps, be sure to turn off the entire system including the display, unplug
all components from their outlets, and disconnect all the interconnect cables from the display.
Foam mat or thick
soft cloth
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
12
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic.co.jp/global/
MS0602S0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Panasonic TY42TM5G Operating instructions

TY42TM5G
Panasonic
Brand
Panasonic
Model
TY42TM5G
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents