Hiearcool UCN3320 User manual

Brand: Hiearcool

Model: UCN3320

Type: User manual

The Hiearcool UCN3320 USB-C hub expands your MacBook's capabilities with a variety of ports, including HDMI for connecting to external displays, USB 3.0/2.0 for connecting peripherals, and a PD port for charging your laptop. With up to 5 Gbps transmission speed, you can quickly transfer data or connect to high-resolution displays. The hub's compact design and plug-and-play functionality make it easy to use, whether you're at home, in the office, or on the go.

Compatible model:

MacBook Pro (13-inch) 2016 & later

MacBook Pro (15-inch) 2016 & later

MacBook Pro (16-inch) 2019 & later

MacBook Air (Retina 13-inch) 2018 & later

HDMI 1&2 support 4K@60Hz & 4K@30Hz output.

Ethernet Setting:

4.Sound Setting

Step 1. Connect Your Computer to the Network

Step 2. Configure TCP/IP

Plug one end of the Ethernet cable into the network card or

port in your Macbook Air/Pro and the other into the Ethernet

jack on the wall.

If your Ethernet jack has one orange port, plug your cable

directly into that port. If the Ethernet jack has two orange

ports, try the one on the right side first, as this is usually

the single activated port.

In System Preferences -> Network select Built-In Ethernet

from the Show: drop-down menu.

With the TCP/IP tab selected, select Using DHCP from the

drop-down menu.

Click

Apply Now and then quit System Preferences.

If your MacBook is the first time to use the

ethernet port:

Macbook needs to be set up as follows:

System Preferences → Network → Click “+” to create a

new service → Select USB 10/100/1000 LAN → Create →

Application (Click on the application to show USB USB

10/100/1000 LAN Green, connected successfully), The

macbook is accessed via wired internet at this time.

MacBook: System Preferences → Sound → Select the

sound output device (built-in speakers: computer sound,

Display: monitor / TV sound, USB: headphone sound)

Windows computer: computer monitor sound symbol

(right click) → sound Playback (Select steps are as follows:

Speaker 2-USB pnp Audio Device is the headphone sound,

the speaker Realtek High Definition Audio is the computer

audio sound, the Intel display audio is the monitor or the

TV sound, when you need to select the desired option,

Click: Device Default → Default Device;

Up to 5 Gbps transmission

Up to 5 Gbps transmission,USB Peripherals

Up to 480 Mbps transmission,USB Peripherals

1) Connect the USB C Hub to the MacBook Pro/Air via Type C

PD port.

2) Connect the HDMI to the projector/TV/displayer via

HDMI cable (Use a 4K HDMI cable to achieve a 4K display)

3) USB 3.0/2.0 port for the peripheral device.

4) PD Interface only for power passing-through only.

* The current output of the new MacBook

Pro is around 1.5A. When the current exceeds 1.5A

The computer will start the self-protection function

with prompt: The USB power has high consumed

(due to the display data transfer); please detach

the product.

** Unplug the USB C Hub, disable the iCon,

restart the laptop. Connect the wall charger

(laptop's charger) to the PD port then plug it

into the laptop before using the other function.

*** Do not disable the PD port when transferring

any data.

HDMI-1

up to 4K@60Hz

HDMI-1

up to 4K@60Hz

HDMI-2

up to 4K@30Hz

HDMI-1

up to 4K@60Hz

HDMI-2

up to 4K@30Hz

HDMI-2

up to 4K@30Hz

* To achieve the 4K resolution, the PC/Monitors/Cable

must support 4K display output.

8. Any Concern?

Email: hiea[email protected]

PD Charging

Only

data transfer

PD Charging

Only

data transfer

Product Support

Product Support: [email protected]

Hiearcool UCN3320 User manual

Hiearcool UCN3320 User manual

Hiearcool UCN3320 User manual

Related papers

Other documents