Register and create a new account
or
Log in with your user name and password
•Go to SYSTEMS, press “Add New System”
•Enter required parameters, press “Save”
1234
123456
1. Select the system 2. Go to SYSTEM
3. Press “ADD WIDGET”
1. ADD WIDGET> PGM Outputs> OUT1 2. Select the icon, pulse or level, etc. 3. Add to Dashboard
•Go to DASHBOARD
•The first person to add a system becomes an administrator. He can
add other users and give them permissions : admin or user
IMPORTANT:
•When adding the controller to SeraNova app:
1.The SERA Cloud service must be turned on
in SERA2> GSM Communication> SERA Cloud Service
2.The power supply must be turned on („PWR“ LED must blink green);
3.Must be registered in to network („REG“ LED must be solid yellow).
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Topkodas PROGATE User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Curtis SERA2B User guide
-
SICK TDC-E (TELEMATIC DATA COLLECTOR) Operating instructions
-
Motorola Edge 2021 User manual
-
-
-
Motorola One Hyper User manual
-
Verizon MOTOROLA ONE 5G UW ACE User guide
-
Motorola One 5G ACE User manual
-
Motorola Edge User guide
-
Motorola Edge+ User guide