MKA-9.5H9.5W

Sprout MKA-9.5H9.5W User manual

  • Hello! I've reviewed the assembly instructions for the MakerWall Mirror MKA-9.5H9.5W_MIRROR. This document provides guidance on how to mount the mirror with command strips and how to carefully remove it if needed. I'm ready to answer any questions you have about the assembly process or its features.
  • How do I prepare the mirror for mounting?
    How should I mount the mirror?
    How to remove the mirror?
1Simple. Modern. American Made.
QUARK ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601 MODEL NO. MKA-9.5H9.5W_MIRROR DOCUMENT: AI-MKA-MIRROR WWW.SPROUT-KIDS.COM COPYRIGHT QUARK ENTERPRISES 2022
Adult assembly only
Assemble completely
before use
Remove clear lm from front of
Mirror.
2Remove backing tape on (2) of the (4)
Command Strips, saving other (2) for later.
3Carefully put mirror onto desired location on
slotboard. Make sure mirror is straight and
aligned before pressing tight.
To remove, carefully and slowly peel up from
the bottom. It may take 30 seconds. Be patient.
Remove backing tape
from (2) new command
strips, and apply mirror
elsewhere, as desired.
ASSEMBLY INSTRUCTIONS
REMOVAL
Frustrated?
Need Help?
STOP
Talk to our customer
service agent at:
+1 (833) 530-0033
MakerWall
Mirror
1Simple. Modern. American Made.
QUARK ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601 MODEL NO. MKA-9.5H9.5W_MIRROR DOCUMENT: AI-MKA-MIRROR WWW.SPROUT-KIDS.COM COPYRIGHT QUARK ENTERPRISES 2022
Adult assembly only
Assemble completely
before use
Remove clear lm from front of
Mirror.
2Remove backing tape on (2) of the (4)
Command Strips, saving other (2) for later.
3Carefully put mirror onto desired location on
slotboard. Make sure mirror is straight and
aligned before pressing tight.
To remove, carefully and slowly peel up from
the bottom. It may take 30 seconds. Be patient.
Remove backing tape
from (2) new command
strips, and apply mirror
elsewhere, as desired.
ASSEMBLY INSTRUCTIONS
REMOVAL
Frustrated?
Need Help?
STOP
Talk to our customer
service agent at:
+1 (833) 530-0033
MakerWall
Mirror
/