Artika For Living FLP14T offers versatile lighting solutions for various indoor settings. With its slim profile and dimmable 46W LED panel, it emits a bright and energy-efficient 4000K neutral white light. Installation is a breeze using the included mounting hardware, and the product boasts a long lifespan of 50,000 hours.
Artika For Living FLP14T offers versatile lighting solutions for various indoor settings. With its slim profile and dimmable 46W LED panel, it emits a bright and energy-efficient 4000K neutral white light. Installation is a breeze using the included mounting hardware, and the product boasts a long lifespan of 50,000 hours.
ZHEJIANG SHUANGYU ELECTRONIC TECHNOLOGY CO.,LTD
LED panel
Manual instruction
(Please read the manual carefully before using the product)
Basic Features:
Product name：LED Panel
Rated input：120V～60Hz
Rated Power：46W
Power Factor：>0.9
Color temperature range：4000K
Working Temperature：-10-+40℃
Working Humidity：0%-85%
Lifetime：50000 Hours
Control mode：triac dimmer
Product instruction（overview）
Parts Description Quantity
Junction box screw 2
Wire connector 3
Retaining screw 4
Wall anchor 4
Mounting plate 1
panel light
X1
Assembly instruction:
1、 Install the mounting plat on the junction box;
2、 Use a crayon to mark the location of the screw hole;
Mounting plate
Junction box screw
Crayon
Mounting plate Support screw hole
Junction box
3、 Remove the mounting plate, drill holes in the marked position with electric drill, and install
the wall anchor into the hole;
4、As shown below, install the mounting plate；
Mounting plate
Retaining screw
Junction box screw
5、As shown in the figure, hang the hook on the mounting plate and connect the wires as
required;
Wired hook
Encoche
LED panel
White(N)
Black(L)
Wire connector
Ground wire(G)
Mounting plate
LED panel slot
Meta anchor
LED panel
6、Assemble the panel light onto the mounting plate as shown；
LED panel
Metal anchor
LED panel slot
Mounting plate
LED panel
Attention:
1. Before using, please check the line voltage is to meet product voltage, avoiding any wrong
voltage to damage product or other risk;
2. The product is irreplaceable, assembly must be electrical technician, when lifetime is ending,
please replace the product;
3. Ceiling product yields heat energy, please keep the circumstance around the product in the
air flow to help heat consumption.
Non-warranty items:
1. Repair without being allowed, misuse; collision; abuse; liquid entering; accident; change;
damaging and painting the label or false mark;
2. Over warranty period；
3. Damage by Natural power with irresistible condition；
4. Doesn’t fulfill the list on the《product failure condition》；
5. Deliberately being wrong to operate the product which including accessory on the 《product
failure condition》, such as working voltage, the phase cutting, or unmatched adapter ETC which
apples in the condition non-defined by manufacturer ;
Manufacturer：ZHEJIANG SHUANGYU ELECTRONIC TECHNOLOGY CO.,LTD
Address：Tashan Industry Zone,Meilin Street,Ninghai County,Ningbo City,
315609,Zhejiang,P.R.China
Instruction：product instruction(manual), refer to《design standard on Product package material
standard》
FCC Statement：
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference,and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However,there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV technician for help.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Artika For Living FLP14T offers versatile lighting solutions for various indoor settings. With its slim profile and dimmable 46W LED panel, it emits a bright and energy-efficient 4000K neutral white light. Installation is a breeze using the included mounting hardware, and the product boasts a long lifespan of 50,000 hours.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Ningbo OT027A Rocket Racers Remote Controlled Car User manual
-
Artika VAN2-RT Operating instructions
-
Artika CLGL-HD1 Operating instructions
-
Artika FMGL-C1 Operating instructions
-
Dahua IPC-HUM8231-L5-0280B Quick start guide
-
-
-
-
Zhejiang Dahua Vision Technology Co., LTD DH-IPC-HF8242F-FD Quick start guide
-
