Ajax Online Zigbee Lights Operating instructions

  • Hello! I have reviewed the provided instructions for Zigbee Lights. This document outlines the steps for pairing your lights with a Philips Hue Bridge, including initial setup, room assignment, and how to perform a factory reset if needed. I'm ready to answer your questions about setting up your lights.
  • How do I add the Zigbee light to the Hue system?
    What should I do if pairing fails?
    Where can I find additional support?
For further information, please contact us and
we’ll be happy to assist you.
[email protected].uk | www.ajaxonline.co.uk
Zigbee Lights
Instructions for pairing with Philips Hue Bridge
2Select Light setup and
select "Add Lights"
Open the Hue App and
press Settings.
1
Firstly select “Search”.
Then connect the LED
controller & strip to
the mains and turn on
power. The new light
will show as
"Extended colour light"
3Add to room via
room setup
4
Now create a
room or add the
newly discovered light
to existing room*
5
FACTORY RESET
*If this fails, reset the controller by:
step 1 - plug in the LED strip
step 2 - wait for 5 secs (min)
step 3 - turn LED strip ON/OFF 5 times
reset will be confimed when LED strip
will flash in various colours.
IMPORTANT
Please do not power the
LED controller & lights yet.
Please follow the instructions.
/