Flat surface
Original
Release
• Flat
back
surface
• Black
color
Original
Wedge
• Window
•
Flat front
Original Super Adjustable Replacements parts
no longer available.
Release
• 2 side
flanges
• Charcoal
gray color
Wedge
• Solid front
face
• Charcoal
gray color
Side Flange
NEW Replacement Parts
WARNING
• Super Adjustable 2 releases may NOT be used with Original Super Adjustable wedges.
• Super Adjustable 2 wedges may NOT be used with Original Super Adjustable releases.
Failure to follow these replacement part instructions could result in product failure and/or personal injury or property damage.
Do NOT mix old and
new components
Do NOT mix old and
new components
Sleeve design is
unchanged.
3
2
2
Figure C: Attaching the wedge and sleeve to the post.
1
IMPORTANT: For easiest replacement of the Super Adjustable corner release, place the
shelf
upside down on the floor.
Figure A: Removing the Super Adjustable Corner Release
Figure B: Installing a Super Adjustable Corner Release
Remove the corner release as shown.
2
Position the release so that it is
resting against the back of the collar.
1
InterMetro Industries Corporation
North Washington St., Wilkes-Barre, PA USA 18705
For product information, call 1-800-992-1776 -or-
Visit www.metro.com
L01-496 11/2012
Information and specifications
are subject to change without
notice. Please confirm at time
of order.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Henny Penny PFE-500 User manual
-
Intermetro SuperErecta Installation guide
-
metroInter MUD18-8 Datasheet
-
Kodak Kodak DryView 8610 Service Bulletins
-
Victa 160 cc Operating Instructions Manual
-
Buell P3 User manual
-
VESPA GTS Super 125 i.e. (2009) User manual
-
Vermont Casting Defiant 1945 User manual
-
Meade LX90GPS User manual
-
Vermont Castings FREESTANDING WOODBURNER Specification