Ingenico iCT 200 Series Installation guide

Ingenico
Brand
Ingenico
Model
iCT 200 Series
Type
Installation guide
IMPORTANT INFORMATION EMV CHIP CARD PROCESSING
This device has the ability to process EMV chip cards. If you are set
up to accept EMV chip cards you will notice a few dierences when
presented an EMV chip card for payment .
1. EMV chip cards must be inserted into the device or pin pad if
attached (swiped transactions are not allowed).
2. The EMV chip card must remain in the device until the transac-
tion is complete
3. The transaction may require a customer to enter a PIN (similar
to a debit transaction).
4. EMV chip card transactions require the credit card to remain in
the possession of the cardholder at all times.
For more information regarding EMV chip card acceptance and pro-
cessing please visit: www.paymentstart.com/secure
INSTALLATION INSTRUCTIONS
Step 1: Open box
Step 2: Follow installation instructions on page 2
Step 3: Begin processing
CONTACT US:
www.paymentstart.com
for user guides and other DIY tips
1-866-451-4007
Activation & Training
for further assistance
8:30 AM – 9:00 PM EST, M-F
Ingenico NA online help
videos can be found on
YouTube – search for “Out
of the box: iCT200 Series.”
Watch the videos online or
from your smartphone.
Ingenico iCT200 Series Installation Guide
Your
Payment Solutions
Team
DOCUMENT D’EXECUTION
INGENICO_CMJN.ai
INFORMATIONS GENERALESCOULEURS UTILISEES APPROBATION
Client: INGENICO
Date : 10 DEC 2013
Utilisation: Impression quadri.
Ne pas utiliser pour application
écran.
C 67/M 54
J 47/N 43
C 0/M 100
J 100/ N0
Port
Inserng the paper roll
OR
Telephone (IN)
Router
Power
Hardware Installaon
Ethernet (ETH)
IN
EMV Chip Reader
(See back for more informaon)
Installing the Pin pad
(Pin pad must be installed before the power is connected)
Pin pad connecon
(USB HOST)
Pin pad
ETH
(Paper roll must feed as shown)
(Terminal & Magic Box should come pre-connected)
Magic Box
EMV Chip Reader
(See back for more informaon)
Port
Inserng the paper roll
OR
Telephone (IN)
Router
Power
Hardware Installaon
Ethernet (ETH)
IN
EMV Chip Reader
(
See back for more informaon)
Installing the Pin pad
(Pin pad must be installed before the power is connected)
Pin pad connecon
(USB HOST)
Pin pad
ETH
(Paper roll must feed as shown)
(Terminal & Magic Box should come pre-connected)
Magic Box
EMV Chip Reader
(See back for more informaon)
Port
Inserng the paper roll
OR
Telephone (IN)
Router
Power
Hardware Installaon
Ethernet (ETH)
IN
EMV Chip Reader
(
See back for more informaon)
Installing the Pin pad
(Pin pad must be installed before the power is connected)
Pin pad connecon
(USB HOST)
Pin pad
ETH
(Paper roll must feed as shown)
(Terminal & Magic Box should come pre-connected)
Magic Box
EMV Chip Reader
(See back for more informaon)
Port
Inserng the paper roll
OR
Telephone (IN)
Router
Power
Hardware Installaon
Ethernet (ETH)
IN
EMV Chip Reader
(
See back for more informaon)
Installing the Pin pad
(Pin pad must be installed before the power is connected)
Pin pad connecon
(USB HOST)
Pin pad
ETH
(Paper roll must feed as shown)
(Terminal & Magic Box should come pre-connected)
Magic Box
EMV Chip Reader
(See back for more informaon)
HARDWARE INSTALLATION
(Terminal & Magic Box should come pre-connected)
INSTALLING THE PIN PAD
(Pin pad must be installed before the power is connected)
INSERTING THE PAPER ROLL
(Paper roll must feed as shown)
Port
Inserng the paper roll
OR
Telephone (IN)
Router
Power
Hardware Installaon
Ethernet (ETH)
IN
EMV Chip Reader
(See back for more informaon)
Installing the Pin pad
(Pin pad must be installed before the power is connected)
Pin pad connecon
(USB HOST)
Pin pad
ETH
(Paper roll must feed as shown)
(Terminal & Magic Box should come pre-connected)
Magic Box
EMV Chip Reader
(See back for more informaon)
Port
Inserng the paper roll
OR
Telephone (IN)
Router
Power
Hardware Installaon
Ethernet (ETH)
IN
EMV Chip Reader
(See back for more informaon)
Installing the Pin pad
(Pin pad must be installed before the power is connected)
Pin pad connecon
(USB HOST)
Pin pad
ETH
(Paper roll must feed as shown)
(Terminal & Magic Box should come pre-connected)
Magic Box
EMV Chip Reader
(See back for more informaon)
or
Serial Link R5232
USB Port
Ethernet Link (optional)
USB Host
Second Serial Link R5232
(optional)
Telephone
Power Supply
  • Page 1 1
  • Page 2 2

Ingenico iCT 200 Series Installation guide

Ingenico
Brand
Ingenico
Model
iCT 200 Series
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents