Badger Basket ADVENTURE FIRE STATION Assembly Instructions

Brand: Badger Basket

Model: ADVENTURE FIRE STATION

Type: Assembly Instructions

1.0/0712/TG

ADVENTURE FIRE STATION

PRODUCT MODEL

NUMBER:

40502

VERSION CODE:

1.0/0712/TG

Assembly Instructions.

Adult Assembly Required.

Read all instructions before use.

This manual is part of the product and

must be kept for future reference.

FOR REPLACEMENT PARTS: http://www.badgerbasket.com/parts • E-mail: [email protected]

Toll-Free: 1-800-236-1310 (Monday to Thursday 7:30 AM-3:30 PM CST)

Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163

Visit us online at www.badgerbasket.com

If you need product

parts, see Page 2!

1.0/0712/TG

CARE INSTRUCTIONS:

The re station can be wiped clean with a very lightly dampened cloth if it is

dried immediately. Never soak the re station or leave water on the surface.

BEFORE YOU BEGIN ASSEMBLY:

Check all parts. If anything is missing or not

satisfactory, please DO NOT call the store

or return the product to them. Please go online to:

http://www.badgerbasket.com/parts

Most problems are resolved

without you needing to leave home.

If contacting us, please have this

instruction manual, your product model number,

and your Version Code ready.

Your Model Number is: 40502

Your Version Code is: 1.0/0712/TG

WARNING - CAUTION

WARNING

ADULT ASSEMBLY REQUIRED

DUE TO THE PRESENCE OF SMALL PARTS AND SHARP

POINTS DURING ASSEMBLY, KEEP OUT OF REACH OF

CHILDREN UNTIL ASSEMBLY IS COMPLETE.

READ ALL INSTRUCTIONS before use of this product. Use only the parts

provided by Badger Basket. Keep instructions for future use. Do not use the

product if it is damaged or broken. This item is a toy only.

For children ages three (3) years and older.

Never attempt to sit or stand on the toy. It is not a step stool or ladder.

No product is a substitute for adult supervision.

Always supervise your child during play.

1.0/0712/TG

PARTS INCLUDED:

FINAL ASSEMBLY DIAGRAM:

* Actual product and parts may vary slightly from the drawing.

Dx1 - SECOND

FLOOR WALL

Ax1 - FIRE

STATION BODY

Cx1 - FIRST

FLOOR WALL

Bx1 - SECOND FLOOR

Ex1 - ROOF

1.0/0712/TG

STEP 1 STEP 2

STEP 3A STEP 3B

STEP 4

STEP 5

Fold up the long sides of the (A) FIRE STATION

BODY to the position shown in STEP 2.

Fold up the short sides of the

(A) FIRE STATION BODY and insert

the tabs into the slots on the long sides.

Assemble the (B) SECOND FLOOR,

by positioning it as shown and inserting the tabs

on the left, right, and back.

Be sure the tabs on the back panel are folded

open to keep the oor secure and stable.

Insert the (C) FIRST FLOOR WALL and

(D) SECOND FLOOR WALL and secure

the tabs at top and bottom.

Attach the (E) ROOF by positioning it

as shown and insert the tabs on the

left, right, and bottom as needed.

STEP 6

The FIRE STATION is complete! Refer to

FINAL ASSEMBLY DIAGRAM

on page 3!

Badger Basket ADVENTURE FIRE STATION Assembly Instructions

Badger Basket ADVENTURE FIRE STATION Assembly Instructions

Badger Basket ADVENTURE FIRE STATION Assembly Instructions

Related papers

Other documents