Haier M560C User manual

Statement

Reproduction, transfer, distribution or storage of part or all of the contents

in this document in any form without the prior written permission as Haier

Technologies Co.., Ltd.

The contents of this manual maybe different with the cell phone please

according to the cell phone.

Haier reserves the right to revise this document or withdraw it at any time

without prior notice.

Safety Precautions

Please read these simple guidelines. Not following them may be dangerous

or illegal. For further information, see the section of ‘Warnings and

Precautions’.

Contents

........................................

............................................

.....................................................

.................................................

1 Getting to Know Your Phone 1

2 Instructions before Use 4

3 Quick Guide 5

4 Basic Functions 10

5 Menu Functions 15

1 Getting to Know Your Phone

Your Mobile Phone

1.1 Appearance

1

1.2 Key description

Key

Send key

End key

Left soft key

Right soft key

OK key

Number key

#

*

Description

Making or answering a call. In standby mode, press to access

All calls screen.

End calls or reject calls.

Long press: Power on, power off.

In standby mode, press to enter Menu.

In standby mode, press to Names.

Confirm operations you have operated.

Enter numbers, letters, and some special characters.In standby

mode, press and hold [1] to access your voice mail server.

In standby mode, long press to enable or disable the

Meeting mode; short press to Input the symbol “#”.

In standby mode, long press to input the symbol “*”

+” p” w”; short press to input the symbol “*”.

Four-way

navigation key

In standby state

1.Press [left navigation key] to enter messages .

2.Press [right navigation key] to enter FM radioe.

3.Press [up navigation key] to enter shortcuts.

4.Press [down navigation key] to enter Audio player.

5.Press [OK key] to enter main menu.

2

1.3 State icons

3

Indicates SIM Card 1 signal strength.

Indicates SIM Card 2 signal strength.

Indicates C Card signal strength.

You may use GPRS to serve.

Vibration mode has been activated.

New short message(s) received.

Receives one new SMS.

Receives one new MMS.

Alarm clock has been activated.

Headset is connected.

Start call forwarding function.

Keyboard has been locked.

Indicates battery power level.

You have one or several missed call.

Open the Bluetooth

Starts the multi-direction stopwatch function.

2 Instructions before Use

2.1 Install and charge the phone

1.Remove the battery cover 2.Insert the card

3.Install the battery 4. Plug the travel adapter into the phone

4

2.2 Power on/off

2.3 Security password

Ensure battery is properly installed.

Power on and hold [End key] button until boot screen appears.

If SIM/C cards have PIN code protection, input your PIN code and then press

[OK].

After power on, if SIM/C card inserted is valid, your cell phone will automatically

search available network; if not, it will prompt: no SIM/C card is available.

To power off, hold [End key] until shutdown screen appears.

You can use access password to avoid unauthorized use of your SIM/C card.

PIN code is used to prevent illegal use of user's SIM/C card. PIN code is provided

by network service operator.

PUK code, referring to personal unlock code, is used to unlock SIM/C card that is

locked because of wrong input of PIN code. Ten times wrong input of PUK code,

SIM/C card will lose efficacy. PUK code is provided by network service operator.

PIN code

PUK code

3 Quick Guide

5

3.1 Dial numbers

When logo of network provider appears on the screen, you can dial or answer

calls. Signal show on the screen.

Since quality of call is greatly affected by barrier, movement in small range can

effectively improve quality of call.

Use to input phone number in standby state and then press

to start the call. Pressing “Clear” to erease wrong number..

While dialing, dialing animation will be displayed on the screen. Once the other

side is put through, talk state information will be displayed on the screen.

Press to end call.

You can enter domestic phone numbers as following sequence:

Area code Phone number Send key

Some fixed phone extension cannot be put through directly. Instead, you need to

enter exchange number first and hold 0 key. Then enter extension number when

“W” appears on the screen.

You can dial fixed phone extension number as following (C card does not support

the function):

Make domestic phone call

number keys send

key right soft key

End key

Call extension of fixed phone

6

Area code Exchange number w Extension number Send key

To make an international call, press * key until pre-fix symbol “ ” for international

long-distance call appears on the screen.

You can enter international phone number as following :

+ Country code Complete phone number Send key

According to conventions, county code for Germany is 49, and 44 for UK and 46

for Sweden, etc.

In some networks, it is not allowed to use “+” to dial international phone

numbers.

Every phone number you dialed or received is saved in Call history in your mobile

phone, namely , , . Most recently number is located

at the top of every list. When the list is full, old numbers will be deleted

automatically.

Phone numbers appear in the lists can be dialed directly by pressing key.

In phone number list, press to view details and press to

save the numbers to phonebook or delete them.

Make international Call

+

Note:

Dial a number in the list

missed Received and Dialled

Send

OK key Option soft key

3.2 Emergency call

&

7

If your network provider does not provide roaming service for the area, “Restricted

Service” will be displayed on the screen. As long as you are within coverage of

network, you can make an emergency call even without a SIM card.

You can press or to answer call. If is

actived, you can press any key beside and to answer

calls.

You can press to reject incoming call.

During the call, press to terminate current call.

Dialled call can be cancelled by pressing key or .

Your phone can store recent missed, received, dialled calls and record the last

minutes.

In talk state, press “ ” to enter talk options. Operation is the

same as that of .

Talk options can only be seen in the process of talk, and functions such as call

wait and multi-party talk have to be supported by network. Please contact your

3.3 Answer call

3.4 Terminate call

3.5 Call History

3.6 Call options

Send key Left soft key Any Key Answer

End key Right soft key

End key

End [Right soft key]

Left soft key Options

function menu

8

network provider.

You can directly enter phone number at current talk screen and press to

dial new phone number.

In talk options, you can make following operations:

Hold current talk or resume held talk.

Switch between current talk and held talk.

To talk with one person privately in multi-party talk. Other participants will be

automatically turned into held state (C card does not support the function).

Send key

Swap *

Private chat *

Hold single call

End single call

New call

Sound recorder

Mute

9

Conference*

End all calls

Phonebook

Messages

Note:

Enter multi-party talk state. You can hold multi-party talk or terminate the call.

Enter phonebook.

Enter SMS

Menu items marked with * appear in specific conditions only. For

example, “Switch” appears only when calls in talk state and hold state exist at the

same time. Besides, multi-party talk function should be applied from network

service operator.

You can select time for automatic keyboard lock via [Settings][Security ][Auto

keypad lock].

You can also press [End key]] to lock keyboard in standby state.

Press [left soft key] and then [*] to unlock the keyboard.

3.7 Keyboard lock

setup

4 Basic Functions

&

10

4.1 Dial phone

Direct dial

Quick dial from contacts list

Quick dial from dialed list

In standby state, press number keys to enter the telephone number you want to

dial. P

Press [ right soft key] to delete wrong input. Long press [right soft key] to delete all

numbers or press [End key] to return to standby interface directly.

If the dialled number can be recognized by phonebook, name and icon of contact

person will be displayed on dialing screen, and calling animation is displayed at

the same time.

Press [Right soft key] or [End key] to end call.

Press [right soft key] to enter contact interface.

Press [Up navigation key] or [Down navigation key] to select the phone number

you want to dial.

Press [Send key] to dial out.

Press [Send key] to enter dialled record.

Press [Up navigation key] or [Down navigation key] to select the number you want

to dial.

ress [Send key].

11

Press [Send key] to dial out .

Open the speed dial function, and set. In standby mode, Long press number key

to speed dial.

When there is an incoming call, if information about the number is stored in

contacts, caller's name and icon will be displayed. At the same time, specified

ringtone will be played or vibrate according to current settings. If caller hides

his/her number or the network bans call indication, the incoming call is displayed

as ******.

Press [Left soft key] or [Send key] to answer calls. If Any Key Answer is selected,

you can press any key apart from End key and Right soft key to answer calls.

Press [End key] directly to .

Press [Options] to access the talk control functions in the process of talk.

If network supports, you can hold current talk.

Press [Options] and select Hold option in the menu.

Quick dial

Hold/release talk state

Dial second number

4.2 Answer incoming call

4.3 Talk options

reject call

12

When you are making a call, you can dial another number.

Enter the second number or press [Phonebook] option in [Options] to select in

phonebook and then press [Send key]. When the second number is put through,

the first call will be held automatically.

If there is a second incoming call in the process of talk, the screen will display a

second call is waiting. Call wait function is only available when the network

supports this service and you have set to Enabled in Call wait menu.

Press [Answer soft key] or [Send key] to answer second call. When the second

call is put through, the first call will be switched to hold state.

Press [End key] to terminate the second call.

Select the number in talking and press [Options] to display following options:

Switch: Current call enters hold state.

Conference: Add held call to conference call.

End single call: End one call.

Phonebook: Enter phonebook.

Message: Enter SMS.

Record: Enter record state (C card does not provide this function).

Answer second incoming call

Select current phone number

13

Mute: Open or close mute (C card does not provide this function).

DTMF: Open or close DTMF (C card does not provide this function).

You can adjust volume through the side key.

You can enter letters, symbols and numbers through keyboard of your cell phone.

The phone provides Smart ABC/abc/FR/fr/AR/ar, Multi and

Number input modes. P

Press [*] to enter symbol selection mode

.

A key represents several letters. When it is pressed, Smart input mode will

automatically make a correct choice.

Press [OK] to confirm the input word.

Press once to enter the first letter and press twice to enter the second letter.

Character list:

Turn up tone

Input mode

4.4 Text edit

4.6 Smart input mode

4.7 Multi input mode

ABC/abc/FR/fr/AR/ar

ress [#] key to switch.

Use keyboard to enter numbers.

4.5 Number input mode

14

Page is loading ...

Haier M560C User manual

Haier M560C User manual

Related papers

Other documents