Milwaukee 58-01-1270 User manual

  • Hello! I am an AI chatbot trained to assist you with the Milwaukee 58-01-1270 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
NOTE:
ON LEADS 4 AND 5, INSERT
TERMINALS INTO BRUSH
HOLDER BEFORE ROUTING
THEM THROUGH THE WIRE
TRAPS. TUCK LEADS 3 AND
4 DOWN INTO WIRE TRAPS.
NOTE:
LEAVE NO SLACK ON
FIELD SIDE OF WIRE
TRAP.
NOTE:
All leads must be held to f l/E”.
Terminals, Connectors and 1 or 2 End Wire Preparation
All field leads to be measured from
and perpendicular to laminations.
All lead lengths are before stripping.
TERMINAL DESCRIPTION
Co&
Part No.
Qnty.
Tl
23-74-0155
4
T2
22-44-0090
2
I I
1
1/1