Milwaukee 58-01-0646 Wiring Instructions

Type
Wiring Instructions
WIRING INSTRUCTIONS
58-01-0646
2-
Wires routed under switch
WIRE FORMING AND
SOLDER DETAIL FOR
BRUSH HOLDER CLIP
Wires routed on top of switch
NOTE:
All leads must be held to 2 l/8”.
All field leads to be measured from
and perpendicular to laminations.
All lead lengths are before stripping.
TERMINAL DESCRIPTION
Code Part No.
Qnty.
TZ
23-74-0390 1
CONNECTOR DESCRIPTION
Code Part No.
Qnty:
  • Page 1 1

Milwaukee 58-01-0646 Wiring Instructions

Type
Wiring Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI