WEG SSW-07 User guide

Type
User guide

This manual is also suitable for

WEG SSW-07 is a compact, reliable, and efficient soft-starter that provides soft starting and stopping of three-phase induction motors. With an easy-to-use interface, it ensures smooth acceleration and deceleration, reducing mechanical stress on the motor and driven equipment, thus extending their lifespan. Its built-in protection features safeguard the motor against overloads, short circuits, and phase loss, making it a versatile solution for various industrial applications.

WEG SSW-07 is a compact, reliable, and efficient soft-starter that provides soft starting and stopping of three-phase induction motors. With an easy-to-use interface, it ensures smooth acceleration and deceleration, reducing mechanical stress on the motor and driven equipment, thus extending their lifespan. Its built-in protection features safeguard the motor against overloads, short circuits, and phase loss, making it a versatile solution for various industrial applications.

2
ENGLISH
Table 1 - Contents of the Kit
1. DESCRIPTION OF THE KIT
Contents:
2. SAFETY NOTICES
DANGER!
Disconnect the supply of the Soft-Starter SSW-07/SSW-08 before installing
the IP20 kit.
3. OPTIONAL MODULE DESCRIPTION
This optional module has the function to protect against contact to energized
parts.
The Enclosure Size 3 IP20 Kit is connected directly to the SSW-07/SSW-08. The
module is xed close to the power terminals, both at the line input and at
output to the motor.
4. ENCLOSURE SIZE 3 IP20 KIT INSTALLATION PROCEDURE
1. Contents of the kit. 2. Fix the bottom cover at the holes
located on both sides of the power
terminals.
SSW-07/SSW-08 Enclosure size 3 IP20 Kit (Part number: 10413866)
Quantity Description
1 Enclosure size 3 IP20 optional kit
3
ENGLISH
4. Press it down until it ts into the bottom
cover.
3. First x the second support on the upper
side.
5. Verify if the supports are connected.
6. To connect the supports of the power
supply, repeat the same sequence.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

WEG SSW-07 User guide

Type
User guide
This manual is also suitable for

WEG SSW-07 is a compact, reliable, and efficient soft-starter that provides soft starting and stopping of three-phase induction motors. With an easy-to-use interface, it ensures smooth acceleration and deceleration, reducing mechanical stress on the motor and driven equipment, thus extending their lifespan. Its built-in protection features safeguard the motor against overloads, short circuits, and phase loss, making it a versatile solution for various industrial applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages