Page is loading ...
screen A 4
Long beam B 2
Short beam C 2
Main top connector D 1
2
nd
tier top
connector
E 1
2
nd
tier top pole F 4
Curve pipe
connector
G 4
Long arc beam H 4
Short arc beam
I 4
Long middle beam J 2
Short middle beam K 2
hook L 1
Main canopy M 1
2
nd
tier canopy N 1
Mosquito netting O 1
finial P 1
Parts List
Fig1-3．用螺丝（BB）、平垫（CC）将长横梁（C1）与组装好的屏风连接固定，
Fig.1： Lock the long beam (B)and short
beam (C) to the screen (A).
Fig.2： Insert the hook
(L) into the main top
connector (D).
Fig.3:
Insert the long
middle beam (J) into the
short beam (C), insert the
short middle beam (C) into
the long beam (B).
Fig.4
: Insert the long
middle beam (J) and short
middle beam (K) into the
main top connector (D).
Fig.5：Insert the curve
pipe connector (G) into
the main top connector
(D)
Fig.6： Insert the long arc
beam (H) and short arc beam
(I)into the curve pipe
connector (G).
Fig.7： Insert the long arc
beam (H) and short arc beam
(I)into the standing pole
of the screen (A).
FF ￠6*180 ground stake 16pcs
GG Plastic loop 52pcs
HardwarePack 3
Fig.8 ： P
ut the main
canopy (M) onto the main
top, do not unfold, then
insert the 2
nd
tier top
pole (E) into the 2
nd
tier top connector(E).
Fig.9： Put the 2
nd
tier
canopy (N) on the 2
nd
tier
top, secure the four
corners to the 2
nd
tier top
pole.
Fig.10： Insert the finial
(P) into the 2
nd
tier top
connector (E).
Fig.11： Insert the 2
nd
tier top pole (F)
into the curve pipe connector (G),
open the main canopy(M),and
secure the canopy to the screens
and beams.
Fig.12： Secure the mosquito
net (O) to the screen (A) and
beams (B)(C)with plastic hook
(GG)
Fig.13： Secure the gazebo to
the lawn with ground stake
(FF).
/
