Kenwood KIV-700 User manual

Page is loading ...

2

|

Quick Start Guide

Contents

About the Quick Start Guide

About the Quick Start Guide............... 2

Before use .................................................. 3

First step ..................................................... 4

Basic Operations ...................................... 5

Playing Music (USB/iPod) ..................... 6

Listening Radio ........................................ 7

Hands-free phoning ............................... 8

Basic Operations of Remote Control

... 9

Accessories ..............................................10

Installation Procedure .........................10

Before Installation .................................10

Connecting Wires to Terminals.........12

Installation/Removing the Unit........14

This Quick Start Guide explains the basic

functions of this unit. For functions

not covered in this Guide, refer to the

Instruction Manual (PDF file) contained in

the included CD-ROM “Instruction Manual”.

To refer to the Instruction Manual contained

in the CD-ROM, a PC loaded with Microsoft®

Windows XP/Vista/7 or Mac OS X® 10.4

or later is required in addition to Adobe®

Reader™ 7.1 or Adobe® Acrobat® 7.1 or later.

The Instruction Manual is subject to

change for modification of specifications

and so forth. You can download the latest

version of the Instruction Manual from

www.kenwood.com/cs/ce/.

English

|

3

Before use

2WARNING

To prevent injury or fire, take the

following precautions:

• Do not watch or fix your eyes on the

unit’s display when you are driving for any

extended period.

• To prevent a short circuit, never put or

leave any metallic objects (such as coins

or metal tools) inside the unit.

How to reset your unit

If this unit or the connected unit (auto

disc changer, etc.) fails to operate properly,

reset the unit. While pressing the [Volume]

knob and the [MENU] button, press the

[SRC] button for at least 3 seconds. The unit

returns to factory settings when the reset

operation is complete.

SRC MENU

Volume

Cleaning the Unit

If the faceplate of this unit is stained, wipe it

with a dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the

stain off with a cloth moistened with neutral

cleaner, then wipe it again with a clean soft

dry cloth.

Applying spray cleaner directly to the unit

may affect its mechanical parts. Wiping

the faceplate with a hard cloth or using a

volatile liquid such as thinner or alcohol

may scratch the surface or erases characters.

Notes

• If you experience problems during

installation, consult your Kenwood dealer.

• When you purchase optional accessories,

check with your Kenwood dealer to make

sure that they work with your model and

in your area.

• Characters that conform to ISO 8859-5 or

ISO 8859-1 can be displayed. Set “Russian”

of <Initial Settings> (page 37) (Instruction

manual) to “ON”.

• The RDS or RBDS feature won’t work

where the service is not supported by any

broadcasting station.

• The illustrations of the display and the

panel appearing in this manual are

examples used to explain more clearly

how the controls are used. Therefore,

what appears on the display in the

illustrations may differ from what appears

on the display on the actual equipment,

and some of the illustrations on the

display may be inapplicable.

4

|

Quick Start Guide

Operation of the [Volume] knob

When setting the unit, use the [Volume] knob to select

the item and determine the setting. The operation of

the knob is common for the most of the settings.

First step

Exit Demonstration Mode

Turn off the demonstration mode

when you use it for the first time after

installation.

1 Press the [Volume] knob to quit the

demonstration mode when the message

“To Cancel DEMO Press the volume knob”

is displayed (approx. 15 seconds).

2 Turn the [Volume] knob to select “YES”,

and then press the [Volume] knob.

The demonstration mode can also be

canceled in the Menu List mode.

Refer to <Demonstration Mode Setting>

(page 38) of Instruction manual.

Adjusting the Clock & Date

1 Press the [MENU] button to enter the

Menu List mode.

2 Set the clock, time zone and date.

Refer to <Operation of the [Volume]

knob> for how to select the item and

determine the setting.

3 Setting the Clock

Select “Settings”

➜ “Clock & Date” ➜ “Time

Synchronized”.

Select “ON” or “OFF”.

When selected “ON”, proceed to step 4.

When selected “OFF”, continue.

Select “Clock Adjust”.

Adjust hour, minute and time zone.

Press the [MENU] button to finish the

clock adjustment.

Select “Summer Time”.

Select “ON” or “OFF”.

4 Setting the Date

Select “Date Adjustment”.

Adjust month, day and year.

Press the [MENU] button to finish the

date adjustment.

5 Date Format

Select “Date Mode”.

Select Date format.

Press the [MENU] button for at least 1

second, and press it again briefly to exit

the Menu List mode.

MENU

1 Turn to select/ adjust

the item.

2 Press to determine

the item/ setting.

English

|

5

Basic Operations

Power

Turns the power ON by pressing the

[SRC] button.

Keeping pressing the [SRC] button for at

least 1 second turns the power OFF.

Source select

Press the [SRC] button and then turn

the [Volume] knob. To determine the

selected source, press the [Volume]

knob.

Tuner (“TUNER”) j USB (“USB”) or iPod

(“iPod”) j Internal Memory (“Int.Mem.”)

j Auxiliary Input (“AUX”) j Standby

(“STANDBY”) j Tuner...

Volume

Turning the [Volume] knob adjusts the

sound volume.

USB terminal

iPod can be connected.

iPod

VIDEO IN

iPod

AUDIO IN

iPod

VIDEO OUT

iPod

AUDIO OUT

USB device can be connected.

When connecting the USB device,

usage of the CA-U1EX (option) is

recommended.

Auxiliary input

Portable audio device can be connected

with the stereo mini-plug (3.5 mm ø).

Auxiliary input source is initially set to

“OFF”. Set “Built in AUX” described in

<Initial Settings> (page 37) (Instruction

manual) to “ON”.

AUX

X

SRC

Auxiliary input USB Terminal

Volume

6

|

Quick Start Guide

4

MENU DISP

¢38

SEARCH MODE

TI

Playing Music (USB/iPod)

Playing USB device

Connect a USB device or iPod to the USB

terminal.

When connected, the source is switched

automatically and a song starts playing.

Moving to the next folder on USB

Press the [SEARCH MODE] button.

Selecting a Song

Press the [4] or [¢] button to select

a song.

This unit cannot be operated for a few

seconds while reading Artwork after

selecting a song.

Fast Forward or Fast Backward of

the Song

Press and hold the [4] or [¢] button

to fast-forward or fast-backward the

audio file containing songs.

Pause and play

Press the [38] button to pause or

resume playing a song.

Removing USB device or iPod

Press the [38] button for at least 2

seconds to enter the USB Remove mode

(“USB REMOVE” is displayed) and the USB

device can be removed safely.

Switching display

Press the [DISP] button to select display

mode.

Selects the Artwork small, Artwork large,

Video or Clock.

Music Search

1 Press the [MENU] button.

2 Turn the [Volume] knob and press it

when the desired item is displayed.

USB: Select “USB List” or “Music”.

iPod: Select “Music” or “Videos”.

3 Search for music.

Operation type Operation

Move between items Turn the [Volume] knob.

Select an item Press the [Volume] knob.

Page up or down Press the [DISP] or [TI] button.

Press the [DISP] or [TI]

button for at least 1 second to

continuously scroll. Press the

button again to stop scrolling.

Return to previous item Press the [MENU] button.

Return to Top menu Press the [MENU] button for at

least 1 second.

To cancel the music search operation

of Audio file or iPod, press the [MENU]

button for at least 1 second, and then

press it again briefly.

Volume

English

|

7

Listening Radio

Selecting a Tuner source

1 Press the [SRC] button.

2 Turn the [Volume] knob to select

“TUNER”, and then press the [Volume]

knob.

Selecting the Band

Press the [SEARCH MODE] button to

change the band in the order of FM1 ➜

FM2 ➜ FM3 ➜ AM.

Selecting a Station

Press the [4] or [¢] button to select

the station you want to listen to.

Traffic information

Press the [TI] button to turns on or

off the traffic information function

alternately.

If traffic bulletin starts when the function

is ON, “Traffic INFO” is displayed and

traffic information is received.

Station Preset Memory

1 Press the [4] or [¢] button to select

the station you want to memory.

2 Press the [MENU] button.

3 Turn the [Volume] knob to select “List &

Memory”, and then press the [Volume]

knob.

4 Turn the [Volume] knob to select preset

number (“1” – “6”), and then press the

[Volume] knob for at least 2 seconds.

Recalling the stations in the

memory

1 Press the [MENU] button.

2 Turn the [Volume] knob to select “List &

Memory”, and then press the [Volume]

knob.

3 Turn the [Volume] knob to select recall

number (“1” – “6”), and then press the

[Volume] knob.

SRC

4

MENU

¢

SEARCH MODE

TI

Volume

8

|

Quick Start Guide

Hands-free phoning

Registering your cellphone in this

unit

1 By operating the cellphone, register the

hands-free unit (pairing). Select “KCA-

BT300” or “KCA-BT200” from the list of

connected units.

2 Enter the PIN code of this unit from the

cellphone.

The PIN code of this unit is “0000” by

default.

When registration of your cellphone

is complete, the phone book of the

cellphone is automatically downloaded

to this unit. (If the phone book has not

been downloaded to this unit, operate

the cellphone to download it.)

Calling a number in the Phone

Book

If the phone book has not been

downloaded to this unit, operate the

cellphone to download it.

1 Press the [TI] button for at least 1

second.

2 Turn the [Volume] knob to select

“Phonebook”, and then press the

[Volume] knob.

3 Turn the [Volume] knob to select initial

of name, and then press the [Volume]

knob.

4 Turn the [Volume] knob to select phone

number.

5 Press the [Volume] knob to dial.

Answering a Phone Call

Press the [Volume] knob.

Disconnecting a Call

Press the [SRC] button.

Function of KCA-BT300/ KCA-BT200 (Optional Accessory)

SRC

TI

Volume

English

|

9

Basic Operations of Remote Control

AT T

38

SRC

VOL

FM+

AM–

5/∞

Preparing the remote control unit

Pull the battery sheet out from the remote

control unit to the direction of the arrow.

General control

• Volume control: [VOL]

• Source select: [SRC]

• Volume reduce: [ATT]

When the button is pressed again, the

volume returns to the previous level.

In Tuner source

• Band select: [FM+]/[AM–]

• Station select: [4]/[¢]

• Recall preset stations: [1] — [6]

In USB/ Internal Memory source

• Music select: [4]/[¢]

• Folder select: [FM+]/[AM–]

• Pause/Play: [38]

• Movement between Menulist mode:

[5]/[∞]

• Return to previous folder: [

]

In iPod source

• Movement between Menulist mode:

[5]/[∞]

• Return to previous item: [

]

• Music select: [4]/[¢]

• Pause/Play: [38]

¤ CAUTION

• Keep battery out of reach of children

and in original package until ready to

use. Dispose of used batteries promptly.

If swallowed contact physician

immediately.

• Do not leave the battery near fire or

under direct sunlight. A fire, explosion

or excessive heat generation may result.

• Do not set the remote control in hot

places such as on the dashboard.

• Danger of explosion if Lithium battery is

incorrectly replaced. Replace only with

the same or equivalent type.

10

|

Quick Start Guide

¤

• Mounting and wiring this product

requires skills and experience. For safety’s

sake, leave the mounting and wiring work

to professionals.

• Make sure to ground the unit to a

negative 12V DC power supply.

• Do not install the unit in a spot exposed

to direct sunlight or excessive heat or

humidity. Also avoid places with too

much dust or the possibility of water

splashing.

• Do not use your own screws. Use only

the screws provided. If you use the wrong

screws, you could damage the unit.

• If the power is not turned ON (“Protect”

is displayed), the speaker wire may have

a short-circuit or touched the chassis of

the vehicle and the protection function

may have been activated. Therefore, the

speaker wire should be checked.

• Make sure that all wire connections are

securely made by inserting jacks until they

lock completely.

• If your vehicle’s ignition does not have

an ACC position, or if the ignition wire

is connected to a power source with

constant voltage such as a battery wire,

the power will not be linked with the

ignition (i.e., it will not turn on and off

along with the ignition). If you want to

link the unit’s power with the ignition,

connect the ignition wire to a power

source that can be turned on and off with

the ignition key.

• Use a commercially available conversion

connector if the connector does not fit in

the vehicle connector.

• Insulate unconnected wires with vinyl

tape or other similar material. To prevent

a short circuit, do not remove the caps on

the ends of the unconnected wires or the

terminals.

Before InstallationAccessories

1

.....1

3

.....1 (2 m)

2

.....2

4

.....1 (2.5 m)

Installation Procedure

1. To prevent short circuits, remove the key

from the ignition and disconnect the -

terminal of the battery.

2. Make the proper input and output wire

connections for each unit.

3. Connect the wire on the wiring harness.

4. Take Connector B on the wiring harness

and connect it to the speaker connector

in your vehicle.

5. Take Connector A on the wiring harness

and connect it to the external power

connector on your vehicle.

6. Connect the wiring harness connector to

the unit.

7. Install the unit in your car.

8. Reconnect the - terminal of the battery.

9. While pressing the [Volume] knob and

the [MENU] button, press the [SRC]

button for at least 3 seconds.

English

|

11

• If the fuse blows, first make sure the wires

aren’t touching to cause a short circuit,

then replace the old fuse with one with

the same rating.

• Connect the speaker wires correctly to the

terminals to which they correspond. The

unit may be damaged or fail to work if

you share the - wires or ground them to

any metal part in the car.

• After the unit is installed, check whether

the brake lamps, blinkers, wipers, etc. on

the car are working properly.

About CD players/disc changers

connected to this unit

If the CD player/ disc changer has the “O-N”

switch, set it to the “N” position.

The functions you can use and the

information that can be displayed may differ

depending on the models being connected.

Connecting the ISO Connector

The pin arrangement for the ISO connectors

depends on the type of vehicle you drive.

Make sure to make the proper connections

to prevent damage to the unit.

The default connection for the wiring

harness is described in 1 below. If the ISO

connector pins are set as described in 2,

make the connection as illustrated.

Please be sure to reconnect the cable as

shown 2 below to install this unit to the

Volkswagen vehicles etc.

1 (Default setting) The A-7 pin (red) of the

vehicle’s ISO connector is linked with

the ignition, and the A-4 pin (yellow) is

connected to the constant power supply.

A-7 Pin

(Red)

A-4 Pin

(Yellow)

Unit

Vehicle

Ignition cable

(Red)

Battery cable

(Yellow)

2 The A-7 pin (red) of the vehicle’s ISO

connector is connected to the constant

power supply, and the A-4 pin (yellow) is

linked to the ignition.

A-7 Pin

(Red)

A-4 Pin

(Yellow)

Unit

Vehicle

Ignition cable

(Red)

Battery cable

(Yellow)

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

iPod

AUDIO IN

iPod

VIDEO IN

iPod

VIDEO OUT

iPod

AUDIO OUT

12

|

Quick Start Guide

Connecting Wires to Terminals

⁄

See <Connecting the ISO Connector> (page 11).

Ignition wire (Red)

Battery wire (Yellow)

A–7 Pin (Red)

A–4 Pin (Yellow)

Connector A

Connector B

Connector Function Guide

Pin Numbers for

ISO Connectors

Cable Colour Functions

External Power

Connector

A-4 Yellow Battery

A-5 Blue/White Power Control

A-6 Orange/White Dimmer

A-7 Red Ignition (ACC)

A-8 Black Earth (Ground)

Connection

Speaker

Connector

B-1 Purple Rear Right (+)

B-2 Purple/Black Rear Right (–)

B-3 Gray Front Right (+)

B-4 Gray/Black Front Right (–)

B-5 White Front Left (+)

B-6 White/Black Front Left (–)

B-7 Green Rear Left (+)

B-8 Green/Black Rear Left (–)

⁄

• Speaker Impedance

: 4 – 8 Ω

• USB terminal Maximum

Supply current

: 500 mA

⁄

Do not remove the cap

when you do not use the

USB cable. The connector

will cause the unit to

malfunction if it gets in

touch with any metallic

part of the vehicle.

For the sake of safety, be sure to connect the parking sensor.

⁄

Connect to the vehicle’s parking brake detection switch harness.

Parking sensor wire (Light Green)

Parking sensor wire Junction cable

(Light Green) (Accessory 3)

USB connector (1m)

iPod cable

(Accessory 4)

iPod

(commercially

available)

USB device (commercially available)

P.CONT

REMOTE CONT

REMOTE INPUT

STEERING WHEEL

ANT.

CONT

MUTE

L

R

L

R

PRK SW

iPod

AUDIO OUT

iPod

VIDEO OUT

English

|

13

FM/AM antenna input (JASO)

Front output

Fuse (10A)

Sub Woofer output

Rear output

To Kenwood disc changer/ External optional

accessory

⁄

To connect these leads, refer to the relevant

instruction manuals.

AUX input (Stereo)

Use the mini-plug (3.5 mm ø) which is stereo

type and does not have any resistance.

Wiring harness

(Accessory 1)

If no connections are made, do not let the wire come out from

the tab.

Mute control wire (Brown)

To use the steering wheel remote control

feature, you need to an exclusive remote

adapter (not supplied) matches your car is

required.

Steering remote control wire

(Light Blue/Yellow)

Connect to the terminal that is grounded

when either the telephone rings or during

conversation.

⁄

To connect the Kenwood navigation

system, consult your navigation manual.

Power control/Motor antenna

control wire (Blue/White)

Connect either to the power control terminal

when using the optional power amplifier, or to

the antenna control terminal in the vehicle.

iPod visual output

(Yellow)

iPod audio output

(Left: White, Right: Red)

Antenna Cord

14

|

Quick Start Guide

Installation/Removing the Unit

Installation

Bend the tabs of the mounting sleeve

with a screwdriver or similar utensil

and attach it in place.

⁄

• Make sure that the unit is installed

securely in place. If the unit is unstable, it

may malfunction (for example, the sound

may skip).

Removing the hard rubber frame

1. Engage the catch pins on the removal

tool and remove the two locks on the

upper level.

Lift up and pull the frame forward as

shown in the figure.

Catch

Lock

Removal tool (Accessory

2)

2. When the upper level is removed,

remove the lower two locations.

⁄

• The frame can be removed from the

bottom side in the same manner.

Removing the Unit

1. Refer to the section <Removing the hard

rubber frame> and then remove the

hard rubber frame.

2. Insert the two removal tools deeply into

the slots on each side, as shown.

3. Lower the removal tool toward the

bottom, and pull out the unit halfway

while pressing towards the inside.

Accessory 2

¤

• Be careful to avoid injury from the catch

pins on the removal tool.

4. Pull the unit all the way out with your

hands, being careful not to drop it.

¤ CAUTION

Install this unit in the console of your

vehicle.

Do not touch the metal part of this unit

during and shortly after the use of the

unit. Metal part such as the heat sink and

enclosure become hot.

English

|

15

This symbol mark indicates that

Kenwood manufactured this

product so as to decrease harmful

inﬂ uence on the environment.

• “Adobe Reader” is a trademark of Adobe

Systems Incorporated.

• The “AAC” logo is a trademark of Dolby

Laboratories.

• iTunes is a trademark of Apple Inc.

• iPod is a trademark of Apple Inc., registered in

the U.S. and other countries.

• iPhone is a trademark of Apple Inc.

• “Made for iPod” means that an electronic

accessory has been designed to connect

specifically to iPod and has been certified by

the developer to meet Apple performance

standards.

• “Works with iPhone” means that an electronic

accessory has been designed to connect

specifically to iPhone and has been certified

by the developer to meet Apple performance

standards.

• Apple is not responsible for the operation of

this device or its compliance with safety and

regulatory standards.

This Product is not installed by the manufacturer

of a vehicle on the production line, nor by the

professional importer of a vehicle into an EU

Member State.

Information on Disposal of Old

Electrical and Electronic Equipment and

Batteries (applicable for EU countries

that have adopted separate waste

collection systems)

Products and batteries with the

symbol (crossed-out wheeled bin)

cannot be disposed as household

waste.

Old electrical and electronic

equipment and batteries should be

recycled at a facility capable of

handling these items and their waste

byproducts.

Contact your local authority for details

in locating a recycle facility nearest to

you.

Proper recycling and waste disposal

will help conserve resources whilst

preventing detrimental effects on our

health and the environment.

Notice: The sign “Pb” below the

symbol for batteries indicates

that this battery contains lead.

Page is loading ...

Français

|

29

Ce symbole indique que Kenwood

a fabriqué ce produit de façon à

ce qu'il ait un impact moindre sur

l'environnement.

Ce produit n’est pas installé par le constructeur

d’un véhicule sur le site de production, ni par

l’importateur professionnel d’un véhicule dans un

État membre de l’UE.

Information sur l’élimination des

anciens équipements électriques et

électroniques et piles électriques

(applicable dans les pays de l’Union

Européenne qui ont adopté des

systèmes de collecte sélective)

Les produits et piles électriques sur

lesquels le pictogramme (poubelle

barrée) est apposé ne peuvent pas

éliminés comme ordures ménagères.

Les anciens équipements électriques

et électroniques et piles électriques

doivent être recyclés sur des sites

capables de traiter ces produits et

leurs déchets.

Contactez vos autorités locales pour

connaître le site de recyclage le plus

proche.

Un recyclage adapté et l’élimination

des déchets aideront à conserver les

ressources et à nous préserver de

leurs effets nocifs sur notre santé et

sur l’environnement.

Remarque: Le symbole “Pb” ci-dessous

sur des piles électriques

indique que cette pile

contient du plomb.

• “Adobe Reader” is a trademark of Adobe

Systems Incorporated.

• The “AAC” logo is a trademark of Dolby

Laboratories.

• iTunes is a trademark of Apple Inc.

• iPod is a trademark of Apple Inc., registered in

the U.S. and other countries.

• iPhone is a trademark of Apple Inc.

• “Made for iPod” means that an electronic

accessory has been designed to connect

specifically to iPod and has been certified by

the developer to meet Apple performance

standards.

• “Works with iPhone” means that an electronic

accessory has been designed to connect

specifically to iPhone and has been certified

by the developer to meet Apple performance

standards.

• Apple is not responsible for the operation of

this device or its compliance with safety and

regulatory standards.

Page is loading ...

Dieses Produkt wird weder vom Hersteller eines

Fahrzeugs während der Produktion noch von

einem professionellen Importeur eines Fahrzeugs in

einen EU-Mitgliedsstaat eingebaut.

Entsorgung von gebrauchten

elektrischen und elektronischen

Geräten und Batterien (anzuwenden in

den Ländern der Europäischen Union

und anderen europäischen Ländern mit

einem separaten Sammelsystem für

solche Geräte)

Das Symbol (durchgestrichene

Mülltonne) auf dem Produkt oder

seiner Verpackung weist darauf hin,

dass dieses Produkt nicht als normaler

Haushaltsabfall behandelt werden

darf, sondern an einer Annahmestelle

für das Recycling von elektrischen

und elektronischen Geräten und

Batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten

Entsorgung dieses Produktes

schützen Sie die Umwelt und die

Gesundheit Ihrer Mitmenschen.

Unsachgemäße oder falsche

Entsorgung gefährden Umwelt und

Gesundheit.

Weitere Informationen über das

Recycling dieses Produktes erhalten

Sie von Ihrer Gemeinde oder den

kommunalen Entsorgungsbetrieben.

Achtung: Das Zeichen “Pb” unter dem

Symbol für Batterien zeigt

an, dass diese Batterie Blei

enthält.

• “Adobe Reader” is a trademark of Adobe

Systems Incorporated.

• The “AAC” logo is a trademark of Dolby

Laboratories.

• iTunes is a trademark of Apple Inc.

• iPod is a trademark of Apple Inc., registered in

the U.S. and other countries.

• iPhone is a trademark of Apple Inc.

• “Made for iPod” means that an electronic

accessory has been designed to connect

specifically to iPod and has been certified by

the developer to meet Apple performance

standards.

• “Works with iPhone” means that an electronic

accessory has been designed to connect

specifically to iPhone and has been certified

by the developer to meet Apple performance

standards.

• Apple is not responsible for the operation of

this device or its compliance with safety and

regulatory standards.

Deutsch

|

43

Dieses Symbol zeigt an, dass

Kenwood bei der Herstellung

dieses Produkts auf eine

Verringerung schädlicher

Einwirkungen auf die Umwelt

geachtet hat.

Page is loading ...

Nederlands

|

57

Dit merkteken geeft aan dat

Kenwood bij de productie van

dit product heeft geprobeerd

het milieu zo weinig mogelijk te

belasten.

Dit product wordt niet geïnstalleerd door de

fabrikant van een voertuig op de productielijn,

noch door de professionele invoerder van een

voertuig in EU-lidstaten.

Informatie over het weggooien van

elektrische en elektronische apparatuur

en batterijen (particulieren)

Producten en batterijen met het

symbool (doorgekruist verrijdbare

afvalbak) kunnen niet als

huishoudelijk afval worden

weggegooid.

Oude elektrische en elektronische

apparatuur en batterijen moeten bij

een afvalinzamelingspunt worden

ingeleverd en waar deze items en de

daarbij behorende afvalproducten op

de juiste manier verwerkt kunnen

worden.

Neem contact op met de plaatselijke

autoriteiten voor informatie over het

afvalinzamelingspunt dat zich het

dichtst bij u in de buurt bevindt.

Het op de juiste manier recyclen en

weggooien van afval spaart

waardevolle hulpbronnen en

voorkomt potentiële negatieve

gevolgen voor de volksgezondheid

en het milieu.

Opgelet: Het teken “Pb” onder het

symbool van de batterijen

geeft aan dat deze batterij

lood bevat.

• “Adobe Reader” is a trademark of Adobe

Systems Incorporated.

• The “AAC” logo is a trademark of Dolby

Laboratories.

• iTunes is a trademark of Apple Inc.

• iPod is a trademark of Apple Inc., registered in

the U.S. and other countries.

• iPhone is a trademark of Apple Inc.

• “Made for iPod” means that an electronic

accessory has been designed to connect

specifically to iPod and has been certified by

the developer to meet Apple performance

standards.

• “Works with iPhone” means that an electronic

accessory has been designed to connect

specifically to iPhone and has been certified

by the developer to meet Apple performance

standards.

• Apple is not responsible for the operation of

this device or its compliance with safety and

regulatory standards.

Page is loading ...

Declaration of Conformity with regard

to the EMC Directive 2004/108/EC

Manufacturer:

Kenwood Corporation

2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-

8525 Japan

EU Representative's:

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN, The

Netherlands

For Turkey

Bu ürün 26891sayılı Resmi Gazete’de

yayımlanan Elektrikli ve Elektronik Eşyalarda

Bazı Zararlı Maddelerin Kullanımının

Sınırlandırılmasına Dair Yönetmeliğe uygun

olarak üretilmiştir.

This product complies with Directive,

Number 26891 regarding “REGULATION ON

THE RESTRICTION OF THE USE OF CERTAIN

HAZARDOUS SUBSTANCES IN ELECTRICAL AND

ELECTRONIC EQUIPMENT”.

Page is loading ...

Kenwood KIV-700 User manual

Kenwood KIV-700 User manual

in other languages

Related papers

Other documents