Hampton Bay EC022WH User guide

  • Hello! I am an AI chatbot trained to assist you with the Hampton Bay EC022WH User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Includes:
3 Fixtures, 2-19 Connector Cords, 1-Power Cord, 12 screws
Description:
1. Saves Energy!
2. Individual On/Off & Master Power Switch
3. Replaceable BulbLasts 7000 Hours
Easy Installation
1. Remove bulbs before installing by twisting out counter clockwise from plastic housings.
2. Measure and mark the desired locations of the fixtures and screw plastic housings into
place. Be sure to leave enough room for the cords to connect between fixtures and for
the plug to reach your electrical outlet.
3. Twist bulbs clockwise back into plastic housings. Use individual power switches on each
fixture or use the master power switch located on the plug cord to light all 3
simultaneously.
4. Do not connect more than 12 fixtures on the same power plug.
5. Replacement bulbs and additional fixtures can be purchased separately.
CAUTION
Do not attempt to install while plugged in. This fixture is for indoor use only.
This fixture is intended for under cabinet and under shelf installations only having a material
thickness of at least 1/4.
Not for use with plastic cabinets. Do not install this fixture inside of totally enclosed cabinets.
Do not mount over sinks or stoves.
LIMITED WARRANTY
The manufacturer warrants this lighting fixture to be free from defects in materials and
workmanship for a period of one (1) year from date of purchase. This warranty applies only
to the original consumer purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer’s only obligation, and your exclusive
remedy, is the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse, accident,
modifications, alterations, neglect or mishandling. This warranty shall not apply to any
product that is found to have been improperly installed, set-up, or used in any way not in
accordance with the instructions supplied with the product. This warranty shall not apply to
a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or
faulty installation, or any other failure not relating to faulty material or workmanship. This
warranty shall not apply to the finish on any portion of the product, such as surface and/or
weathering, as this is considered normal wear and tear nor shall it apply to light bulbs
supplied with the light fixture or replacement light bulbs. The manufacturer does not warrant
and specially disclaims any warranty, whether express or implied, of fitness for a particular
purpose, other than the warranty contained herein. The manufacturer specifically disclaims
any liability and shall not be liable for any consequential or incidental loss or damage,
including but not limited to any labor/expense costs involved in the replacement or repair of
said product.
/