Dormont Mfg C200Na Datasheet

Brand
Dormont Mfg
Model
C200Na
Type
Datasheet

This manual is also suitable for

Dormont Mfg C200Na is a Double Check Valve Assembly used to prevent backflow of pollutants from entering the potable water supply system. It consists of two independent Bi-Link Check modules within a single housing, four test cocks, and two drip-tight shutoff valves. The Bi-Link Checks are removable and serviceable without special tools. The housing is constructed of 304 (Schedule 40) stainless steel pipe with groove end connections. The C200Na is available with grooved NRS gate valves, post indicator plate, and operating nut.

Dormont Mfg C200Na is a Double Check Valve Assembly used to prevent backflow of pollutants from entering the potable water supply system. It consists of two independent Bi-Link Check modules within a single housing, four test cocks, and two drip-tight shutoff valves. The Bi-Link Checks are removable and serviceable without special tools. The housing is constructed of 304 (Schedule 40) stainless steel pipe with groove end connections. The C200Na is available with grooved NRS gate valves, post indicator plate, and operating nut.

ES-A-C200Na
Job Name ________________________________________________Contractor ______________________________________________
Job Location ______________________________________________Approval________________________________________________
Engineer__________________________________________________Contractor’s P.O. No. ______________________________________
Approval__________________________________________________Representative __________________________________________
Features
• Extremely Compact Design
• 70% Lighter than Traditional
Designs
• 304 (Schedule 40) Stainless Steel
Housing & Sleeve
• Groove Fittings Allow Integral
Pipeline Adjustment
• Patented Bi-Link Check Provides
Lowest Pressure Loss
• Unmatched Ease of Serviceability
• Available with Grooved Butterfly
Valve Shutoffs
• Available for N Pattern Installations
• Replaceable Check Disc Rubber
C200Na BFG
Ames product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Ames Technical
Service. Ames reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make
such changes and modifications on Ames products previously or subsequently sold.
The Colt C200Na Double Check Valve Assemblies are used to prevent
backflow of pollutants, that are objectionable but not toxic, from
entering the potable water supply system. The Colt C200Na may be
installed under continuous pressure service and may be subjected to
backpressure. The Colt C200Na consists of two independently
operating check valves, two shutoff valves, and four test cocks. For use
in non-health hazard applications.
Specifications
The Colt C200Na Double Check Valve Assemblies shall consist of two
independent Bi-Link Check modules within a single housing, sleeve
access port, four test cocks and two drip tight shutoff valves. Bi-Link
Checks shall be removable and serviceable, without the use of special
tools. The housing shall be constructed of 304 (Schedule 40) stainless
steel pipe with groove end connections. Bi-Link Checks shall have
reversible elastomer discs and in operation shall produce drip tight
closure against the reverse flow of liquid caused by backpressure or
backsiphonage. Assembly shall be a Colt C200Na as manufactured by
the Ames Company.
Colt
TM
Series C200Na
Double Check Valve Assemblies
Sizes: 2
1
⁄2" – 6" (65 – 150mm)
www.amesfirewater.com
Dimensions — Weights
Configurations
• Horizontal
• Vertical up
• “N” pattern horizontal
Materials
• Housing & Sleeve: 304 (Schedule 40) Stainless Steel
• Elastomers: EPDM, Silicone and Buna ‘N’
• Bi-Link Checks: Noryl
®
, Stainless Steel
• Check Discs: Reversible EPDM
• Test Cocks: Bronze Body Nickel Plated
• Pins & Fasteners: 300 Series Stainless Steel
• Springs: Stainless Steel
SIZE (DN) DIMENSIONS WEIGHT
G H I J P C200NaBFG
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
2
1
⁄
2
65 29
7
⁄
8
759 22 559 14
15
⁄
16
379 8
13
⁄
16
223 9 229
64 29
38030
11
⁄
16
779 22
3
⁄
4
578 15
7
⁄
16
392 9
3
⁄
16
233 9
1
⁄
2
241
67 30
4 100 31
15
⁄
16
811 24 610 16
1
⁄
4
412 9
15
⁄
16
252 10 254
84 38
6 150 43
3
⁄
16
1097 33
3
⁄
4
857 19
11
⁄
16
500 13
1
⁄
16
332 10
1
⁄
2
267
157 71
Note: For 2
1
⁄
2
" – 6" horizontal/vertical installation, send for literature ES-A-C200/C200N.
Noryl
®
is a registered trademark of General Electric Company.
H
I
J
G
P
G
H
J
I
P
C200NaBFG
C200Na
SIZE (DN) DIMENSIONS WEIGHT
G H I J P C200Na
NRS OSY
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
2
1
⁄
2
65 29
1
⁄
16
738 22 559 15
1
⁄
2
393 8
13
⁄
16
223 9
3
⁄
16
234 123 56 133 60
38030
1
⁄
4
768 22
3
⁄
4
578 17
1
⁄
8
435 9
3
⁄
16
233 10
1
⁄
2
267 144 65 158 72
4 100 33 838 24 610 18
1
⁄
2
470 9
15
⁄
16
252 11
3
⁄
16
284 184 83 184 83
6 150 16 406 5
1
⁄
2
140 44
3
⁄
4
1137 13
1
⁄
16
332 15 381
314 142 336 152
Note: For 2
1
⁄
2
" – 6" horizontal/vertical installation, send for literature ES-A-C200/C200N.
Available Models
Suffix:
NRS - non-rising stem resilient seated gate valves
OSY - UL/FM outside stem and yoke resilient
seated gate valves
BFG - UL/FM grooved gear operated butterfly valves
with tamper switch
*OSY FxG - Flanged inlet gate connection and grooved
outlet gate connection
*OSY GxF - Grooved inlet gate connection and flanged
outlet gate connection
*OSY GxG - Grooved inlet gate connection and grooved
outlet gate connection
Available with grooved NRS gate valves - consult factory*
Post indicator plate and operating nut available - consult factory*
*Consult factory for dimensions
Pressure — Temperature
Temperature Range: 33°F – 110°F (5°C – 43°C)
Maximum Working Pressure: 175psi (12.06 bar)
Approvals
For additional approval information please contact the factory or visit our website at www.amesfirewater.com
Capacity
UL/FM Certified Flow Characteristics
Flow characteristics collected using butterfly shutoff valves.
See literature S-Colt-200/300 for gate valve flow characteristics
* = Rated Flow ** = UL Tested
N - Pattern
B64.51047
IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES
FOR LOCAL INSTALLATION REQUIREMENTS
kPa psi
96 14
83 12
69 10
55 8
41 6
28 4
14 2
00
0 50 100 150 200 250 300 350 gpm
0 190 380 570 760 950 1140 1330 lpm
7.5 15 fps
2.3 4.6 mps
kPa psi
83 12
69 10
55 8
41 6
28 4
14 2
00
0 100 200 300 400 500 gpm
0 380 760 1140 1520 1900 lpm
7.5 15 fps
2.3 4.6 mps
2
1
/2" (65mm)
3" (80mm)
*
**
kPa psi
138 20
110 16
83 12
55 8
28 4
00
0 100 200 300 400 500 600 700 800 gpm
0 380 760 1140 1520 1900 2280 2660 3040 lpm
7.5 15 fps
2.3 4.6 mps
4" (100mm)
*
*
kPa psi
83 12
69 10
55 8
41 6
28 4
14 2
00
0 300 600 900 1200 1500 gpm
0 1140 2280 3420 4560 5700 lpm
7.5 15 fps
2.3 4.6 mps
6" (150mm)
*
**
**
**
N
N
N
N
For additional information, visit our web site at: www.amesfirewater.com
ES-A-C200Na 0836 ©Ames Fire & Waterworks 2008
www.amesfirewater.com
A Division of Watts Water Technologies, Inc.
USA: Backflow- 1427 N. Market Blvd • Suite #9 • Sacramento, CA 95834 • T: 916-928-0123 • F: 916-928-9333
Control Valves- 18550 Hansen Road • Houston, TX 77075 • T: 713-943-0688 • F: 713-944-9445
Canada: 5435 North Service Rd. • Burlington, ONT. L7L 5H7• T: 905-332-4090 • F: 905-332-7068
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Dormont Mfg C200Na Datasheet

Brand
Dormont Mfg
Model
C200Na
Type
Datasheet
This manual is also suitable for

Dormont Mfg C200Na is a Double Check Valve Assembly used to prevent backflow of pollutants from entering the potable water supply system. It consists of two independent Bi-Link Check modules within a single housing, four test cocks, and two drip-tight shutoff valves. The Bi-Link Checks are removable and serviceable without special tools. The housing is constructed of 304 (Schedule 40) stainless steel pipe with groove end connections. The C200Na is available with grooved NRS gate valves, post indicator plate, and operating nut.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents