Dormont Mfg A777SI Datasheet

Brand: Dormont Mfg

Model: A777SI

Type: Datasheet

Dormont Mfg A777SI is a bronze Wye Strainer designed to prevent serious problems by keeping pipelines clean. It features a machined seat in the body and tapered seat in the cap for accurate screen alignment. The Series A777SI's screen has a special flared opening on the upstream end to provide unrestricted flow through the strainer. Screens on all sizes are 20 mesh perforated stainless steel. The device is made of durable materials, including Bronze 85/5/5/5 ASTM B62 for the body, Brass for the cap, and NBR for the gasket. It can withstand pressure of 400psi (27.

Series A777SI Bronze Wye Strainers

f e a t u r e a machined seat in the body

and tapered seat in the cap for accu-

rate screen alignment. All sizes are

p r ovided with tapped retainer cap

and closure plug.

The Series A777SI's screen has a special

f l a r ed opening on the upstream end to provide unrestricted flow

t h rough the strainer. Screens on all sizes are 20 mesh perforated

stainless steel.

Keeping pipelines clean prevents serious pro b l e m s .

E S - A - A 7 7 7 S I

Series A777SI

Bronze Wye Strainer

Sizes:

⁄

" – 2" (15 – 50mm)

Job Name _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ C o n t r a c t o r _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Job Locat i o n _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Ap p r o v a l _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

E n g i n e e r _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ C o n t r a c t o r ’s P. O . N o . _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Ap p r o v a l _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ R e p r e s e n t at i v e _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Ames product specifications in U.S. c u s t o m a r y units and metric are ap p r o x i m ate and are provided for reference only. For precise measurements,

please contact Ames Technical Serv i c e . Ames reserves the right to change or modify product design, c o n s t r u c t i o n , s p e c i f i c at i o n s , or materials with-

out prior notice and without incurring any obligation to make such changes and modifications on Ames products previously or subsequently sold.

M a t e r i a l s

B o d y B r onze 85/5/5/5 ASTM B62

C a p B r a s s

S c re e n 304 Stainless Steel

G a s k e t N B R

P l u g B r onze 85/5/5/5 ASTM B62

ES-A-A777SI 0448 ©Ames Co. 2004 Printed in U.S.A.

A Division of Watts Regulator Company www.amesfirewater.com