2. Strong
  3. SM-SBAR2-BKT-UNIV

Strong SM-SBAR2-BKT-UNIV Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Strong SM-SBAR2-BKT-UNIV Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the SM-SBAR2-BKT-UNIV?
    What is the purpose of the SM-SBAR2-BKT-UNIV?
    What are the depth adjustment options?
    What are the height adjustment options?
    What is the Trim piece for?
    What is the warranty for the SM-SBAR2-BKT-UNIV?
OWNER’S MANUAL
INDOOR / OUTDOOR UNIVERSAL
SOUNDBAR BRACKET
SM-SBAR2-BKT-UNIV
pg.2
SM-SBAR2-BKT-UNIV Assembly Manual
ADJUSTING THE BRACKET
The SM-SBAR2-BKT-UNIV can be adjusted to allow for the desired positioning of a soundbar for
depth and height relative to the display. This is achieved by a sliding Tray bracket and by changing
the orientation of the Hook bracket.
NOTE: This Strong™ bracket has been designed to work with any Episode
®
Soundbar products
but can be used with any other manufacturers’ models.
DEPTH ADJUSTMENTS
HEIGHT ADJUSTMENTS
Soundbar
DisplayDisplay
Soundbar
Display
Soundbar
Soundbar
Display
Soundbar
Display
Display
Soundbar
Display
Soundbar
0
.75in. (0.75 in.)
5.51in. (5.51 in.)
1.79in.
0
.75in. (0.75 in.)
0.33 in.
pg.3
© 2017
STRONG
SM-SBAR2-BKT-UNIV Assembly Manual
ASSEMBLY STEPS
1.Install the Hook Brackets to the rear of the display. Once installed, the brackets will be between the
display and the wall mount.
NOTE: On larger displays only the bottom screw will be used.
2. Insert the Tray brackets into the rear of the Hook Brackets.
Keep the set screws loose to allow for adjusting the depth of the
soundbar once installed in step 3.
3. Cut the provided Trim piece (optional) to the width of the
sound bar. Use as needed.
4. Secure the Trim piece (optional) to the soundbar via the
the Trim piece.
attached
adhesive on
SM-SBAR2-BKT-UNIV Assembly Manual
5. Attach the Soundbar to the installed Tray
brackets and secure with the screws provided
with the Episode™ soundbar.
6. Adjust the soundbar to the desired depth in
relation to the display.
7. Tighten the set screw for each tray bracket. If
using a non Episode™ soundbar, verify that
screws have been provided by the manufacturer.
All Strong™ products have a Lifetime Limited Warranty. This warranty includes
parts and labor repairs on all components found to be defective in material or
workmanship under normal conditions of use. This warranty shall not apply to
repaired under this warranty must be returned to SnapAV or a designated service
LIFETIME LIMITED WARRANTY
Lifetime
For Technical Support : 1.866.838.5052
© 2017 STRONG
1
70106
/