CALLAWAY UPRO GO GOLF GPS

USER GUIDE (V1.2)

© 2010 CALLAWAY GOLF COMPANY

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 2 of 37

Table Of Contents

1 GETTING STARTED WITH THE CALLAWAY UPRO GO..............................................................................................3

1.1 CALLAWAY UPRO GO OVERVIEW................................................................................................................3

1.8 SYNCING YOUR CALLAWAY UPRO GO......................................................................................................17

1.9 WATCHING THE INTRODUCTORY VIDEO..................................................................................................21

2 PLAYING GOLF WITH YOUR CALLAWAY UPRO GO................................................................................................23

2.1 POWERING ON/OFF......................................................................................................................................23

2.2 MAIN MENU...................................................................................................................................................23

2.3 SELECTING A COURSE TO PLAY.................................................................................................................23

2.4 BASICMODE..................................................................................................................................................23

2.5 GOMODE........................................................................................................................................................23

2.6 CHANGING HOLES.......................................................................................................................................23

3 CALLAWAY UPRO GO SETTINGS MENU..................................................................................................................31

5 Compliance..................................................................................................................................................................36

5.1 FCC STATEMENT (USA)...............................................................................................................................36

5.2 INDUSTRY CANADA STANDARD (CANDA 310)..........................................................................................36

5.3 BATTERY INFORMATION AND WARNING...................................................................................................37

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 3 of 37



 1 Getting Started with the Callaway uPro Go

This section provides a brief overview of the location and functionality of the inputs and outputs you will use to enable the

full capability of your uPro Go.

Figure 1: uPro Go Button Layout

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 4 of 37

battery into place. The text on the battery should be facing up. Handle your Li-Ion battery with care. See section 5

for further information on the battery.

3. Slide the top of the battery cover back into place so that the screw is aligned over the screw hole. Finger tighten

the screw in a clockwise direction. Do not over tighten the screw. The battery cover should t snuggly on the de-

vice.

4. Insert the mini-USB connector of the included USB cable into the USB connector on the uPro Go.

5. Connect the larger end of the USB cable to the included wall adapter.

6. Plug the wall charger into an AC wall outlet. The uPro Go’s red LED will be lit while charging. This LED will begin

to ash when charging is completed. Charging the battery completely takes approximately 3 hours.

Go to charge your device.

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 5 of 37

Power/Menu Button - This button is used to power on and off the device when held for at least three seconds. It is also

used to get to the settings menu while in play. While in any of the menus this button can be used to go back to the previ-

ous menu.

Mode - If GoMode is enabled this button will take you in and out of GoMode.

Right and Left LCD Select - The left and right LCD select buttons perform the function indicated just above the buttons

on the display.

Navigational Joystick and Select/Enter - The joystick allows for navigation in either up/down or left/right motion. Press-

ing the center of the joystick acts as enter/select.

Hole Up - Moves you forward one hole.

Hole Down - Moves you back one hole.

Mini-USB Connector - The USB connector is used to connect the device to the computer allowing the device to commu-

nicate with the uPro Go website through the sync program for course updates. It is also used to charge the battery within

the device.

Prior to registering your uPro Go via the Internet, please verify that your computer system meets the following require-

ments:

• Operating System: Windows 2000/XP/Vista/7 or Mar OS 10.4 or above

• Browser: Internet Explorer 6.0 or greater, Firefox 1.5 or greater, Safari 3.0.4 or greater

• USB 1.1 or 2.0 Port

• System Memory: 512 MB of RAM

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 6 of 37

In order to receive course updates and software updates you will need to register your uPro Go online. To begin the regis-

tration process you will need to connect your uPro Go and launch the sync program. The sync program is a program that

allows our website to communicate with your device to update courses. Below are instructions on connecting your uPro

Go and launching the sync program.

Step 1: Power on the uPro Go

Press and hold the power button for 3 seconds to power on the uPro Go. The device is powered on when the boot up

screen appears. After the device is done booting up, the Main Menu will be displayed.

Step 2: Connect to a Computer

Once the Main Menu is displayed on the uPro Go (Figure 3), connect the USB cable to the uPro Go. Insert the mini-USB

connector (smaller end of the cable) into the mini-USB connector on the uPro Go. Insert the other end of the USB cable

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 7 of 37

Step 3: Launch the Sync Program

The third step will vary based on your computers operating system. Please see the section that pertains to your operating

system. Please see section 1.2 for system requirements.

Option 1 - Auto Launcher

Once connected, the program launcher will automatically start. The uPro sync program should already be highlighted as

shown in Figure 5. Clicking “OK” will start the sync program and the uPro Go website login or registration page will launch.

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 8 of 37

. Each time you want to connect your uPro Go to the website for updates, you will be able to double click the uPro icon on

your desktop to launch the sync program. If you don’t want to save the uPro Finder to your desktop, click “Run”.

Save Instructions:

1. Click “Save”

2. At the top of the “Save As” Window, there will be a drop down box labeled “Save In”. Select your desktop. Click

‘Save” in the bottom right hand corner.

3. Go to your desktop and double click the “uPro” icon.

4. The uPro Finder will now run. This will locate you uPro Go that is connected to your computer and launch the sync

program and website.

Run Instructions:

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 9 of 37

If the program launcher and website do not launch upon connection, and you do not want to download the uPro Finder,

the other option to launch the sync program is manually from the uPro Go. See Figure 7

1. Go the Windows Start Menu, click “My Computer”.

2. Locate the uPro Go icon in your “My Computer” folder

3. Right click on the uPro Go icon, a drop down menu should appear that will give you the option to “Sync uPro De-

vice”

4. Click “Sync uPro Device”. This will launch the sync program and website.

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 16 of 37

Course Updates

While you are searching through courses, you may see buttons next to a course that say “Update Region”, Figure 18. If

you would like to update any course from that region, click the “Update Region” button that will mark all of the courses in

that region as “Ready to Sync”. Once you sync, all new courses in this region and course updates will be downloaded to

your uPro Go. When you are through searching the course database, you will need to sync. See section 1.8 for informa-

tion about syncing.

Course Requests

If a course is not mapped, you will see a “Request” button for that course listing. By clicking the request button you will

have requested the course. Courses are mapped with a priority system. If we have imagery available we will map the

course as quickly as possible. You can visit My Course Requests in your user account at any time to check the status of a

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 17 of 37

Regions. Figure 20

The sync summary gives you a summary of the selected regions that you have selected to update on your uPro Go. You

estimated sync time for the selected regions. This is an estimate and will vary based on your internet connection and your

NOTE: Any regions that you have selected to update from the course search results will be marked to sync on this

page.

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 18 of 37

Quick Sync Options Figure 22

This section gives you the option to quickly select from the most common sync selections. There are three available op-

The available regions section gives you a list of all regions that are available for your uPro Go. You have the ability to pick

and choose which regions you would like up to update. The United States has all 50 states plus the District of Columbia

broken out into individual regions to make the sync time shorter for the states. For all other countries, syncing the entire

country will give you all courses that are mapped and available in that country.

To select a region for updates, click “Update Region” This will ag that region and all available courses in that region for

update on your uPro Go. It will change from “Update Region” to “Ready to Sync”

To unselect a region for updates, click “Ready to Sync” and that will change it back to “Update Region”. The region will no

longer agged to be update on your uPro Go.

If the region says “Up To Date” it means there are no course updates or new courses available for that region.

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 19 of 37

Ready to Sync

Once you have determined the regions that you would like to update, you are ready to sync. You should see a Sync Now

button in the middle of the page. Once you click this button this will start the sync process. The sync time will vary from

NOTE: If you want to make any changes to your device preferences, you should do that before syncing. The updates

will be transferred to the uPro Go during sync. You can also update device preferences on your device.

Figure 24: Syncing - My uPro Go Page

Callaway uPro Go

User Guide V 1.2

© 2009 Callaway Golf Company Page 20 of 37

IMPORTANT: Do not disconnect your uPro Go until you are instructed to do so by the sync program. It is normal

for the uPro to be unidentied and identied again by Windows or Mac OS. There is no need to respond to Win-

dows messages during this process.

During the sync you may notice that the website and sync program have reported the same status for a period of time.

This is normal, DO NOT DISCONNECT YOUR DEVICE. If you disconnect your device, anything that has been updated

on the device will be lost and the sync will have to be started again. Figure 26

Once the download is complete, the sync program, website, and device will display sync complete messages, Figure 27.

At this time you can now disconnect your device from your computer. The screen on the uPro Go will prompt you to power

your uPro Go off. After you power your uPro Go back on, you will be able to access the updated and new courses on your