ZiLOG Z8F2480 User manual

Z8F2480
ZiLOG
Brand
ZiLOG
Model
Z8F2480
Type
User manual

This manual is also suitable for

Copyright ©2008 by Zilog
®
, Inc. All rights reserved.
www.zilog.com
Z8F16800144ZCOG
Z8 Encore! XP
®
Dual F1680
Series Development Kit
User Manual
UM021204-0508
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Revision History
ii
Revision History
Each instance in Revision History reflects a change to this document from
its previous revision. For more details, refer to the corresponding pages
and appropriate links in the table below.
Date
Revision
Level Description Page No
May 2008 04 Updated Introduction section. 1
February
2008
03 Updated Zilog logo and changed
ZiLOG to Zilog.
All
June 2007 02 Removed IrDA. 2, 6, 8, 10
November
2006
01 Original issue. All
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Table of Contents
iii
Table of Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
MCU Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hardware-Supported Software Features . . . . . . . . . . . . . . . . . . . . . 3
Z8 Encore! XP
®
Dual F1680 Series Development Board. . . . . . . . . 4
Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Hardware Interface Specification . . . . . . . . . . . . . . . . . . . . . . . . 8
Power and Communication Interfaces . . . . . . . . . . . . . . . . . . . . 8
External Interface Headers JP1 and JP2 . . . . . . . . . . . . . . . . . . 9
Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Customer Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Introduction
1
Introduction
Zilog’s Z8 Encore! XP
®
F1680 Series microcontrollers (MCU) are based
on the 8-bit eZ8 CPU core and optimized for low-power applications. The
Z8 Encore! XP F1680 Series support 1.8 V to 3.6 V operation with
extremely low Active, Halt, and Stop mode currents and an assortment of
speed and low power options. Z8F1680AN020 is the silicon used in the
board. For more information, refer to Z8 Encore! XP
®
F1680 Series
Product Specification (PS0250). The features to balance power and per-
formance needs of applications include:
•
Wide operating voltage range: 1.8 V–3.6 V.
•
Active, Halt, and Stop operational modes with the ability to enable or
disable peripherals for power savings.
•
Oscillator control that determines clock source, operating speed, and
fail safe operation in addition to fast wakeup.
•
A user-controlled Program RAM area to store interrupt service
routines (ISR) of high-frequency interrupts. The Program RAM
mechanism ensures low average current and quick response for high-
frequency interrupts.
MCU Features
Features of the Z8 Encore! XP F1680 MCU include:
•
Two Z8F1680AN020SG 44-pin Devices with 20 MHz eZ8 CPU core
•
16 KB Flash memory with in-circuit programming capability
•
2 KB register data RAM
•
1 KB Program RAM for program code shadowing and data storage
•
256 B non-volatile data storage (NVDS)
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Introduction
2
•
Fast 8-channel, 10-bit analog-to-digital converter (ADC)
•
On-chip temperature sensor
•
Two on-chip analog comparators
•
On-chip low-power operational amplifier (LPO)
•
Two full-duplex, 9-bit, UART ports with support of Local Intercon-
nect Network (LIN) protocol
•
Enhanced serial peripheral interface (SPI) controller
•
I
2
C Master/Slave
•
Three enhanced 16-bit timers with Capture, Compare, and PWM
capability
•
Multichannel timer that supports four capture/compare modules on
one timer
•
Watchdog Timer (WDT) with dedicated internal RC oscillator
•
39 Input/Output (I/O) pins
•
Up to 20 vectored interrupts
•
On-Chip Debugger (OCD)
•
Power-On Reset (POR)
•
Built-in Low-Voltage Detection (LVD) and Voltage Brownout (VBO)
protection
•
Internal Precision Oscillator (IPO) with output frequency range of
43 kHz to 11 MHz
•
External 20 MHz Crystal oscillator
•
Operational voltage: 3.3 V
•
Thirty-nine 5 V-tolerant inputs (DIGITAL mode only)
•
0 ºC to +70 ºC (standard) operating temperature ranges
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Introduction
3
For more information on the Z8 Encore! XP F1680 Series, refer to Z8
Encore! XP
®
F1680 Series Product Specification (PS0250), available for
download at www.zilog.com.
Hardware-Supported Software Features
Zilog’s eZ8 MCU, latest 8-bit MCU meets the continuing demand for
faster and more code-efficient microcontrollers. It executes a superset of
the original Z8
®
instruction set. The eZ8 MCU features include:
•
Direct register-to-register architecture allows each register to function
as an accumulator, improving execution time and decreasing the
required Program Memory.
•
Software stack allows greater depth in sub-routine calls and interrupts
more than hardware stacks.
•
Compatible with existing Z8 code.
•
Expanded internal Register File allows access up to 4 KB.
•
New instructions improve execution efficiency for code developed
using higher-level programming languages including C.
•
Pipelined instruction fetch and execution.
•
New instructions for improved performance including BIT, BSWAP,
BTJ, CPC, LDC, LDCI, LEA, MULT, and SRL.
•
New instructions support 12-bit linear addressing of the register file.
•
Up to 10 MIPS operation.
•
C-Compiler friendly.
•
2 to 9 clock cycles per instruction.
For more details on eZ8 MCU, refer to eZ8
TM
CPU User Manual
(UM0128), available for download at www.zilog.com.
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Z8 Encore! XP
®
Dual F1680 Series
4
Z8 Encore! XP
®
Dual F1680 Series
Development Board
The Z8 Encore! XP Dual F1680 Series development board (see Figure 1)
provides a tool to evaluate features of the Z8 Encore! XP F1680 Series
MCU and to start developing an application before building the hardware.
Figure 1. Z8 Encore! XP F1680 Series Development Board
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Z8 Encore! XP
®
Dual F1680 Series
5
Theory of Operation
Figure 2 displays the Z8 Encore! XP F1680 development board.
Figure 2. Z8 Encore! XP F1680 Development Board
The terms used in this section are explained below:
The features of Z8F1680 MDS-compliant module include:
•
Two Z8F1680 devices: the Z8F1680_M I
2
C Master device and the
Z8F1680_S I
2
C Slave device.
Terms Definitions
Z8F1680_S (MCU_S) I
2
C Slave device
Z8F1680_M (MCU_M) I
2
C Master device
HyperTerminal Console
Serial Port
XModem
UART0 UART1
DBG1
DBG2
MCU_S (U1)MCU_M (U3)
MCU_M
MCU_S
S2
DBG
USB
Smart Cable
ZDS II
Debugger
PC0
PC1
PC2
RED_LED
YELLOW_LED
GREEN_LED
SlaveMaster
S2 - Away from U11 = Slave (U1)
S2 - Toward U11 = Master (U3)
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Z8 Encore! XP
®
Dual F1680 Series
6
•
RS-232 interface.
•
Two MDS connectors.
•
I
2
C-driven DAC that provides analog input for the Z8F1680_S
device.
•
The Slave device has a 20 MHz crystal; the Master device uses
internal IPO.
•
On-chip debugger interface.
The module has two main modes of operation:
•
Downloading and debugging code into the Slave device through the
Master device, using the connection of the OCD of the Slave device
to the UART1 of the Master device. In this case, PA7 of the Master
device is acting as a Reset source for the Slave device and needs to be
configured as an output with Open Drain.
•
Downloading and debugging code in either the Master or Slave
device using the standard OCD interface on either chip.
The operation mode is selected by switch S2.
All the GPIOs of both devices, except for those used on the module are
connected to JP1 and JP2. All the GPIOs of the Slave device, except
analog inputs are connected to the odd pins of JP1. The GPIOs of the
Master device are connected to the even pins of JP1 and to JP2. All the
analog inputs of the Slave device are connected to JP2. Input PB3/ANA3
of the Slave device can be connected through J1 to either the output of U2
(12-bit DAC) or to JP2 pin 6.
The 12-bit DAC7571 manufactured by TI (U2) is controlled either by
Master or Slave device.
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Z8 Encore! XP
®
Dual F1680 Series
7
Block Diagram
Figure 3 displays the block diagram of the Z8F1680 MDS module.
Figure 3. Block Diagram of the Z8F1680 MDS Module
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Z8 Encore! XP
®
Dual F1680 Series
8
Hardware Interface Specification
The hardware specifications include:
•
Headers
•
Drivers (I
2
C, UART, and so on)
•
Debug interface
•
Expansion Module interface
Power and Communication Interfaces
Table 1 lists jumper information concerning the shunt status, functions,
devices, and defaults affected of jumpers JP1, JP2, JP3, JP4, JP5, and JP6.
Table 1. Shunt Settings for the Z8 Encore! XP F1680 Development Board
Number Shunts Function Pins Connected (IN/OUT)
Factory
Settings
1 J1 AN3_IN 1–2 AN3_IN connected to
AN3 on the JP3
2–3
2–3 AN3_IN connected to
Vout of DAC
Default
2 J2 RS-232 IN—RS-232 disabled Default
OUT—RS-232 enabled OUT
4 J4 AVCC for MCU_S IN—AVCC is connected to
VCC_3.3 V
IN
OUT—AVCC not connected
5 J5 GND Test Point N/A
6 J6 VCC_3.3 V Test Point N/A
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Z8 Encore! XP
®
Dual F1680 Series
9
External Interface Headers JP1 and JP2
External interface headers JP1 and JP2 are displayed in the schematic in
Figure 5 on page 11.
Kit Contents
For kit contents, refer to Z8 Encore! XP
®
Dual F1680 Series Develop-
ment Kit Quick Start Guide (QS0038).
Installation
Follow the directions in the Z8 Encore! XP
®
Dual F1680 Series Develop-
ment Kit Quick Start Guide (QS0038) for software installation and setup
of the Z8 Encore! XP Dual F1680 Series Development Kit.
UM021204-0508 Schematics
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
10
Schematics
This section includes schematics for the Z8 Encore! XP Dual F1680 Series Development Board. The following components appear in the
schematic but are not installed on the board:
•
C20
•
J3
•
R13 through R15
•
U11
Figure 4. Z8 Encore! XP Dual F1680 Series MCU Development Board
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
-DIS_232
-DIS_IrDA
-DIS_232
RXD1
-RESET
TXD1
RXD0
nCTS0
TXD0
nCTS1
PBM_[5:0]
TXD1
PES_[6:5]
PCM_[7:0]
-DIS_IrDA
nCTS1
PDM_[3:1]
PA3
nCTS0
PCS_[4:3]
ANA[7:0]
PDS_7
PCS_7
PCS_5
PAM_0
PAS_[7:2]
PA4
RXD0
PBS_5
PAM_1
PEM_0
PA5
TXD0
PCS_6
PDS_[2:1]
PDM_7
PDM_6
RXD1
PEM_[6:3]
-RESET
PES_4
PES_[3:0]
PAM_6
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F24xB Evaluation Module. Schematic.
B
14
Wednesday, November 29, 2006
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F24xB Evaluation Module. Schematic.
B
14
Wednesday, November 29, 2006
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F24xB Evaluation Module. Schematic.
B
14
Wednesday, November 29, 2006
TOP
POWER&COMMUNICATIONS
POWER&COMMUNICATIONS
PA4_RXD0
PCS_6
PCS_5
-DIS_IRDA
-DIS_232
PCS_7
PA3_CTS0
PA5_TXD0
-RESET
TXD1
RXD1
A1
FAB
A1
FAB
MCU
MCU
PD5_TXD1
PA4_RXD0
PD4_RXD1
PD6_DE1
PA3_CTS0
PA5_TXD0
PAM_6
PDS_[2:1]
PEM_0
PCM_[7:0]
PA2_DE0
PAM_0
PAM_1
ANA[7:0]
PDM_6
PDM_[3:1]
PAS_[7:2]
-RESET
PCS_5
PCS_6
PCS_7
PCS_[4:3]
PDS_7
PEM_[6:3]
PBM_[5:0]
PBS_5
PES_[6:5]
PDM_7
PD3_nCTS1
PES_4
PES_[3:0]
MDS INTERFACE
MDS_INTERFACE
-DIS_IrDA
-DIS_232
ANA[7:0]
RXD1
-RESET
PAS_[7:2]
PCS_[4:3]
PDS_[2:1]
PES_[6:5]
PAM_0
PAM_1
PAM_6
PDM_6
PEM_0
PBM_[5:0]
PCM_[7:0]
PDM_[3:1]
PEM_[6:3]
TXD1
RXD0
nCTS0
TXD0
PDS_7
PBS_5
PDM_7
nCTS1
PES_4
PES_[3:0]
UM021204-0508 Schematics
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
11
Figure 5. Z8 Encore! XP Dual F1680 Series MCU Development Board (Continued)
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
SCL
SDA
AVCC
GND
ANA7
ANA2
ANA1
ANA0
ANA6
ANA4
ANA5
ANA3_INANA3_IN
ANA3
PES_6
PDS_7
PES_3
PAS_2
PAS_4
PAS_6
PCS_4
PCS_5
PAS_7
PCS_3
PES_5
ANA3
SCL
SDA
PEM_6
PDM_7
PEM_5
PCM_2
PCM_3
PDM_2
PDM_1
PCM_0
PCM_1
PDM_3
PCM_7
PCM_6
PCM_4
PCM_5
PES_0
PES_1
SCL
PES_2
SDA
PES_3
PES_5
PES_6
PCS_3
PCS_4
PCM_6
PCM_7
PCM_0
PCM_1
PCM_2
PCM_3
PCM_4
PCM_5
PDM_1
PDM_2
PDM_3
PEM_6
PEM_4
PEM_3
PEM_5
AVCC
PDS_1
PDS_2
PEM_4
-RST_S
DBG_S
PAS_2
PAS_7
PAS_3
PAS_6
PAS_5
PAS_5
PAS_4
PAS_3
DBG_M
-RST_M
PES_0
ANA4
ANA5
PEM_3
PBM_3
PBM_4
PBM_5
PBM_2
PBM_1
PBM_0
PES_4
VCC_3.3V
PA5_TXD0
PA4_RXD0
PA3_CTS0
PD5_TXD1
PD6_DE1
PD4_RXD1
ANA[7:0]
PAS_[7:2]
PES_[3:0]
PCS_[4:3]
PDS_[2:1]
PA2_DE0
PBM_[5:0]
PAM_6
PAM_0
PAM_1
PCM_[7:0]
PDM_[3:1]
PDM_6
PEM_[6:3]
PEM_0
-RESET
PCS_5
PCS_6
PCS_7
PDS_7
PBS_5
PDM_7
PD3_nCTS1
PES_[6:5]
PES_4
VCC_3.3V
VCC_3.3V
VCC_3.3V
VCC_3.3V
VCC_3.3V
VCC_3.3V
VCC_3.3V
VCC_3.3V
VCC_3.3V
AVCC
AVCC
VCC_3.3V
VCC_3.3V
VCC_3.3V
VCC_3.3V
VCC_3.3VVCC_3.3V
VCC_3.3V VCC_3.3V
VCC_3.3V
VCC_3.3V
VCC_3.3V VCC_3.3V
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F248x Evaluation Module. Schematic.
B
24
Wednesday, November 29, 2006
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F248x Evaluation Module. Schematic.
B
24
Wednesday, November 29, 2006
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F248x Evaluation Module. Schematic.
B
24
Wednesday, November 29, 2006
DBG
INTERFACE
DEBUG_SELECT
1-2 MDS HDR
2-3 DAC
MASTER ENABLED
SLAVE ENABLED
U6A
SN74LVC2G66
U6A
SN74LVC2G66
2A
1
2B
2
2C
7
GND
4
VCC
8
U7B
SN74LVC2G66
U7B
SN74LVC2G66
2A
5
2B
6
2C
3
GND
4
VCC
8
R6
10K
R6
10K
12
U5A
SN74LVC2G66
U5A
SN74LVC2G66
2A
1
2B
2
2C
7
GND
4
VCC
8
U6B
SN74LVC2G66
U6B
SN74LVC2G66
2A
5
2B
6
2C
3
GND
4
VCC
8
C26
0.1uF
C26
0.1uF
U5B
SN74LVC2G66
U5B
SN74LVC2G66
2A
5
2B
6
2C
3
GND
4
VCC
8
U7A
SN74LVC2G66
U7A
SN74LVC2G66
2A
1
2B
2
2C
7
GND
4
VCC
8
C29
0.1uF
C29
0.1uF
C2
22pF
C2
22pF
C21
0.1uF
C21
0.1uF
C31
0.1uF
C31
0.1uF
R3
10K
R3
10K
12
+
C32
10uF
+
C32
10uF
1 2
U2
DAC7571
U2
DAC7571
Vout
1
GND
2
VCC
3
SDA
4
SCL
5
A0
6
C30
0.1uF
C30
0.1uF
R2
3.3K
R2
3.3K
12
C22
0.1uF
C22
0.1uF
R4
10K
R4
10K
12
U12
SN74LVC1G125
U12
SN74LVC1G125
OE
1
A
2
GND
3
Y
4
VCC
5
J8
SHUNT
J8
SHUNT
U1
Z8F1680
U1
Z8F1680
PE3/T4CHA
3
PA2/DE0/X2IN
1
PA3/CTS0/X2OUT
2
PD6/DE1
4
PA4/RXD0/IRRX0
5
PA5/TXD0/IRTX0
6
PD5/TXD1/IRTX1
7
PA6/T1IN/T1OUT
8
PC4/MOSI/LED
9
PC5/SCK/LED
10
PA7/T1OUT
11
PC6/T2IN/T2OUT/LED
13
PC7/T2OUT/LED
14
PD0/RESET
16
DBG
17
VCC
15
PD4/RXD1/IRRX1
12
PD3/CTS1/COUT1
18
GND
19
PC0/ANA4/COINP/LED
21
PC1/ANA5/COINN/LED
22
PE4/T4CHB
20
PE5/T4CHC
33
PC2/SS/ANA6/LED
23
PC3/MISO/LED
24
PD2/C1INP
25
PD1/C1INN
26
PB0/AMPOUT/ANA0
27
PB1/AMPINN/ANA1
28
PB2/AMPINP/ANA2
29
PB4/ANA7
30
PB5/VREF
31
PB3/CLKIN/ANA3
32
AVCC
36
PE6/T4CHD
34
PE0/T4IN
35
VCC
37
PA0/T0IN/T0OUT/XIN
38
PA1/T0OUT/XOUT
39
GND
40
PE1/SCL
42
PE2/SDA
43
PD7/COUT0
44
AGND
41
P3
HDR/PIN 3x2
P3
HDR/PIN 3x2
1
1
2
2
3
3
4
4
5
5
6
6
S2
SW SPDT
S2
SW SPDT
1
3
2
R9
10K
R9
10K
12
R10
3.3K
R10
3.3K
12
C28
0.1uF
C28
0.1uF
C24
0.1uF
C24
0.1uF
J7
SHUNT
J7
SHUNT
R8
10K
R8
10K
1 2
C1
22pF
C1
22pF
U3
Z8F1680
U3
Z8F1680
PE3/T4CHA
3
PA2/DE0/X2IN
1
PA3/CTS0/X2OUT
2
PD6/DE1
4
PA4/RXD0/IRRX0
5
PA5/TXD0/IRTX0
6
PD5/TXD1/IRTX1
7
PA6/T1IN/T1OUT
8
PC4/MOSI/LED
9
PC5/SCK/LED
10
PA7/T1OUT
11
PC6/T2IN/T2OUT/LED
13
PC7/T2OUT/LED
14
PD0/RESET
16
DBG
17
VCC
15
PD4/RXD1/IRRX1
12
PD3/CTS1/COUT1
18
GND
19
PC0/ANA4/COINP/LED
21
PC1/ANA5/COINN/LED
22
PE4/T4CHB
20
PE5/T4CHC
33
PC2/SS/ANA6/LED
23
PC3/MISO/LED
24
PD2/C1INP
25
PD1/C1INN
26
PB0/AMPOUT/ANA0
27
PB1/AMPINN/ANA1
28
PB2/AMPINP/ANA2
29
PB4/ANA7
30
PB5/VREF
31
PB3/CLKIN/ANA3
32
AVCC
36
PE6/T4CHD
34
PE0/T4IN
35
VCC
37
PA0/T0IN/T0OUT/XIN
38
PA1/T0OUT/XOUT
39
GND
40
PE1/SCL
42
PE2/SDA
43
PD7/COUT0
44
AGND
41
C25
0.1uF
C25
0.1uF
J1
HDR/PIN 3x1
J1
HDR/PIN 3x1
1
1
2
2
3
3
R7
10K
R7
10K
12
C27
0.1uF
C27
0.1uF
Y1
20 MHz
Y1
20 MHz
1 3
2
R1
3.3K
R1
3.3K
12
C23
0.1uF
C23
0.1uF
J4
HDR/PIN 2x1
J4
HDR/PIN 2x1
1
1
2
2
R17
10K
R17
10K
12
UM021204-0508 Schematics
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
12
Figure 6. Z8 Encore! XP Dual F1680 Series MCU Development Board (Continued)
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
ANA7
PCM_1
ANA3
PC3_SCK
PC4_MOSI
GND
ANA5
SDA
GND
VCC_3.3V
ANA4
GND
PC2_nSS
GND
ANA0
SCL
nCTS1
RXD0
PCM_0
ANA1
PC5_MISO
nCTS0
ANA2
RXD1
-RESET
VCC_3.3V
GND
ANA6
TXD0
GND
ANA1
ANA0
ANA2
ANA2
ANA3
ANA7
ANA6
ANA5
ANA4
ANA1
ANA0
PC6_T2IN
PC7_T2OUT
ANA4
ANA7
PCM_0
PCM_1
PCM_2
PC2_nSS
PCM_3
PC3_SCK
PCM_4
PC4_MOSI
PCM_5
PC5_MISO
PCM_6
PC6_T2IN
PCM_7
PC7_T2OUT
PES_0
SCL
PES_1
SDA
PES_2
PES_3
GND
GND
GND
PBM_5
GND
PES_5
GND
PEM_6
PDM_1
PDM_2
PDM_3
PAS_3
PAS_5
PAS_6
PAS_7
PBM_3
PBM_4
PEM_3
PEM_4
PEM_5
PAS_4
PDS_1
PES_6
PCS_4
PCS_3
PDS_2
PBM_2
PBM_1
PBM_0
PAS_2
-DIS_232
-DIS_IrDA
ANA[7:0]
RXD1
nCTS1
-RESET
PAS_[7:2]
PES_[3:0]
PAM_0 PAM_1
PAM_6
PDM_6
PEM_0
PBM_[5:0]
PCM_[7:0]
PDM_[3:1]
PEM_[6:3]
TXD1
TXD0
nCTS0
RXD0
PDS_[2:1]
PDS_7
PBS_5
PCS_[4:3]
PDM_7
PES_[6:5]
PES_4
VCC_3.3V
VCC_3.3V
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F248xB Evaluation Module. Schematic.
B
34
Wednesday, November 29, 2006
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F248xB Evaluation Module. Schematic.
B
34
Wednesday, November 29, 2006
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F248xB Evaluation Module. Schematic.
B
34
Wednesday, November 29, 2006
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
If Module is plugged onto the Dev Platform the local
RS232 interface is disabled by pin 50 of JP2
MDS INTERFACE
NC
NC
C8
0.1uF
C8
0.1uF
12
C4
0.1uF
C4
0.1uF
12
C7
0.1uF
C7
0.1uF
12
JP2
HDR/PIN 30x2
JP2
HDR/PIN 30x2
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23
24
24
25
25
26
26
27
27
28
28
29
29
30
30
31
31
32
32
33
33
34
34
35
35
36
36
37
37
38
38
39
39
40
40
41
41
42
42
43
43
44
44
45
45
46
46
47
47
48
48
49
49
50
50
51
51
52
52
53
53
54
54
55
55
56
56
57
57
58
58
59
59
60
60
C10
0.1uF
C10
0.1uF
12
C3
0.1uF
C3
0.1uF
12
C6
0.1uF
C6
0.1uF
12
C9
0.1uF
C9
0.1uF
12
C5
0.1uF
C5
0.1uF
12
JP1
HDR/PIN 30x2
JP1
HDR/PIN 30x2
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23
24
24
25
25
26
26
27
27
28
28
29
29
30
30
31
31
32
32
33
33
34
34
35
35
36
36
37
37
38
38
39
39
40
40
41
41
42
42
43
43
44
44
45
45
46
46
47
47
48
48
49
49
50
50
51
51
52
52
53
53
54
54
55
55
56
56
57
57
58
58
59
59
60
60
UM021204-0508 Schematics
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
13
Figure 7. Z8 Encore! XP Dual F1680 Series MCU Development Board (Continued)
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
5V
VCC_5V
GND
PA3_CTS0
PA4_RXD0
GND
PA5_TXD0
GND
RXD
CTS
TXD
VCC_3.3V
VCC_3.3V
IRDA_SD
-DIS_232
PA5_TXD0
PA3_CTS0
PA4_RXD0
-DIS_IRDA
PCS_7
-RESET
RXD1
TXD1
PCS_6
PCS_5
VCC_3.3V
VCC_3.3V
VCC_5V
VCC_3.3V
VCC_3.3V
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F24xB Evaluation Module. Schematic.
B
44
Wednesday, November 29, 2006
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F24xB Evaluation Module. Schematic.
B
44
Wednesday, November 29, 2006
Title
Size
Document Number
Rev
Date:
Sheet
of
96C1011-001
C
Z8F24xB Evaluation Module. Schematic.
B
44
Wednesday, November 29, 2006
DIS RS232
USER
DIS IRDA
-RESET
CONSOLE
3.3 OK
VCC 3.3V
POWER & LOCAL INTERFACES
GND
D5
GREEN
D5
GREEN
21
R14
2R2
R14
2R2
12
C13
0.1uF
C13
0.1uF
12
C19
0.1uF
C19
0.1uF
12
U10B
SN74LVC2G04
U10B
SN74LVC2G04
I
3
4
O
2
GND
5
VCC
P1
CON DC
P1
CON DC
2
3
1
S1
SW PB NO
S1
SW PB NO
A B
B1A1
D2
GREEN
D2
GREEN
21
P2
DB9 Female
P2
DB9 Female
5
9
4
8
3
7
2
6
1
C16
0.1uF
C16
0.1uF
12
D4
YELL
D4
YELL
21
R15
10K
R15
10K
12
C12
0.1uF
C12
0.1uF
12
R12
10K
R12
10K
12
C20
0.33uF
C20
0.33uF
J9
SHUNT
J9
SHUNT
R13
68R
R13
68R
1 2
J10
SHUNT
J10
SHUNT
J3
HDR/PIN 2x1
J3
HDR/PIN 2x1
1
1
2
2
C17
0.1uF
C17
0.1uF
12
C15
0.1uF
C15
0.1uF
12
J5
HDR/PIN 3x1
J5
HDR/PIN 3x1
1
1
2
2
3
3
+
C14
10uF
+
C14
10uF
12
R11
100 OHm
R11
100 OHm
12
J6
HDR/PIN 3x1
J6
HDR/PIN 3x1
1
1
2
2
3
3
+
C18
10uF
+
C18
10uF
12
C11
0.1uF
C11
0.1uF
12
R16
10K
R16
10K
1 2
D3
RED
D3
RED
21
U10A
SN74LVC2G04
U10A
SN74LVC2G04
I
1
6
O
2
GND
5
VCC
U9
SPX2815AU-3.3
U9
SPX2815AU-3.3
VI
3
GND
1
VO
2
VO_2
4
U11
ZHX1810
U11
ZHX1810
TXD
2
SD
4
RXD
3
LEDA
1
VCC
5
GND
6
T
7
J2
HDR/PIN 2x1
J2
HDR/PIN 2x1
1
1
2
2
U8
SP3222EBCA
U8
SP3222EBCA
EN
1
C1+
2
C1-
4
C2+
5
C2-
6
T1IN
13
T2IN
12
R1OUT
15
R2OUT
10
V+
3
V-
7
T1OUT
17
T2OUT
8
R1IN
16
R2IN
9
SHDN
20
VCC
19
GND
18
NC2
11
NC1
14
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508 Customer Support
14
Customer Support
For answers to technical questions about the product, documentation, or
any other issues with Zilog’s offerings, please visit Zilog’s Knowledge
Base at http://www.zilog.com/kb
.
For any comments, detail technical questions, or reporting problems,
please visit Zilog’s Technical Support at http://support.zilog.com
.
Z8 Encore! XP
®
Dual F1680 Series Development Kit
User Manual
UM021204-0508
15
DO NOT USE IN LIFE SUPPORT
LIFE SUPPORT POLICY
ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF ZILOG CORPORATION.
As used herein
Life support devices or systems are devices which (a) are intended for surgical implant
into the body, or (b) support or sustain life and whose failure to perform when properly
used in accordance with instructions for use provided in the labeling can be reasonably
expected to result in a significant injury to the user. A critical component is any
component in a life support device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or system or to affect its safety or
effectiveness.
Document Disclaimer
©2008 by Zilog, Inc. All rights reserved. Information in this publication concerning the
devices, applications, or technology described is intended to suggest possible uses and
may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR
PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION,
DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO
DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY
INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION,
DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. The
information contained within this document has been verified according to the general
principles of electrical and mechanical engineering.
Z8 Encore! XP is a registered trademark of Zilog, Inc. All other product or service names
are the property of their respective owners.
Warning:
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

ZiLOG Z8F2480 User manual

Z8F2480
ZiLOG
Brand
ZiLOG
Model
Z8F2480
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents