Roche cobas t 511 Reference guide

Type
Reference guide

Roche cobas t 511 is a coagulation analyzer designed to provide fast and accurate results for a wide range of coagulation tests. It features a user-friendly interface, automated functions, and comprehensive quality control measures to ensure reliable results. With its compact design and throughput of up to 180 tests per hour, the cobas t 511 is ideal for laboratories of all sizes. Advanced automation features, such as automatic sample aspiration and clot detection, minimize hands-on time and reduce the risk of errors.

Roche cobas t 511 is a coagulation analyzer designed to provide fast and accurate results for a wide range of coagulation tests. It features a user-friendly interface, automated functions, and comprehensive quality control measures to ensure reliable results. With its compact design and throughput of up to 180 tests per hour, the cobas t 511 is ideal for laboratories of all sizes. Advanced automation features, such as automatic sample aspiration and clot detection, minimize hands-on time and reduce the risk of errors.

Status Notifier for cobas t 511
coagulation analyzer
Quick Reference Guide Version 1.0
Software version 1.0
Roche Diagnostics
Status Notifier for cobas t 511 coagulation analyzer · Software version 1.0 · Quick Reference Guide · Version 1.0
2
Publication information
Edition notice This publication is intended for operators of the
cobas t 511 coagulation analyzer.
The Status Notifier is classified as a GLU product
(General Laboratory Use product). It is a status light, with
an acoustic alarm intended to provide information to the
customer about the status of the analyzer to which it is
connected.
Every effort has been made to ensure that all the
information contained in this publication is correct at the
time of publishing. However, the manufacturer of this
product may need to update the publication information
as output of product surveillance activities, leading to a
new version of this publication.
Copyright © 2019, F. Hoffmann-La Roche Ltd. All rights reserved.
Contact addresses
Publication version Software version Revision date Change description
1.0 1.0 October 2019 Initial version
y Revision history
Roche Diagnostics GmbH
Sandhofer Strasse 116
68305 Mannheim
Germany
Made in Switzerland
Roche Diagnostics
Status Notifier for cobas t 511 coagulation analyzer · Software version 1.0 · Quick Reference Guide · Version 1.0
3
Table of contents
Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Intended use for IVD accessories and software. . 4
Conventions used in this publication. . . . . . . . . . . 4
About the Status Notifier. . . . . . . . . . . . . . . . . . . . . . . . 5
Configuring the acoustic alarm . . . . . . . . . . . . . . . . . . 7
Confirming an analyzer alarm. . . . . . . . . . . . . . . . . . . . 8
Roche Diagnostics
Status Notifier for cobas t 511 coagulation analyzer · Software version 1.0 · Quick Reference Guide · Version 1.0
4 Preface
Preface
Use this publication together with the cobas t 511
coagulation analyzer User Guide or User Assistance.
Operation and maintenance actions are described in the
User Guide and User Assistance.
Intended use
The Status Notifier is classified as a GLU Product
(General Laboratory Use Product). The product is an
indicator lamp both visual and audible to aid customers
awareness of the attached analyzer status.
Intended use for IVD accessories and software
This product is not classified as an IVD accessory or
software package.
Conventions used in this publication
Product names Except where the context clearly indicates otherwise, the
following product names and abbreviations are used:
Product name Abbreviation
Instrument Software for
cobas t 511 coagulation
analyzer
software
cobas t 511 coagulation
analyzer
analyzer
y Product names
Roche Diagnostics
Status Notifier for cobas t 511 coagulation analyzer · Software version 1.0 · Quick Reference Guide · Version 1.0
About the Status Notifier 5
About the Status Notifier
The Status Notifier is a feature that informs the user of
the instrument status from a distance.
It is composed of a status light and an acoustic alarm.
Colors, sound, and statuses The following table describes how color and sound of the
Status Notifier correspond to the analyzer statuses.
Specifications
Sound pulse
Status indicator Statuses Description
"Normal"
Green
o Operating
o Standby
o Pausing
o Maintenance
No user action required
"Alarm"
Red
o Error
o Warning
The alarm status indicates that an immediate user action is
required. The analyzer is not ready for operation.
o The status light is red and the sound is active.
"Warning"
Yello w
o Analyzer offline
o Paused
o Sampling stop
The warning status indicates that a user action is required to
enter normal operation. If no user action is done, the status may
change to alarm.
o No acoustic alarm
"Alternating Status"
three lamp colors
o Initializing
o Shutting down
o No acoustic alarm
"Service"
Flashing yellow
o Diagnostics In order to perform tests and special maintenance actions, the
Roche Service representative sets the instrument to Diagnostics
mode.
o No acoustic alarm
y Colors, Sound, and states
Status light R/Y/G (LED)
Diameter of status light 70 mm
Height of pole 500 mm
Acoustic signal
integrated
Volume (70–80 dB)
(selectable by switch)
Length of USB cable 2.0 m
Installation to table Mounting bracket for tables
(thickness: 15 mm up to 58 mm)
Power USB port
Rhythm Buzzer pt4
Pitch A 2093.0 Hz
Pitch B 1760.0 Hz
Duration of a pulse 1.5 sec
Interval between pulses 1.0 min
First pulse after status
change
The first pulse starts as a double
pulse with an interval of 0.5 s
Roche Diagnostics
Status Notifier for cobas t 511 coagulation analyzer · Software version 1.0 · Quick Reference Guide · Version 1.0
6 About the Status Notifier
w Acoustic pulse diagram
,QVWUXPHQWVWDWXVFKDQJHVWRHUURU
5HGOLJKWLVWULJJHUHG
)LUVWSXOVHLVWULJJHUHG
3XOVH
V

3XOVH

3XOVH

3XOVH

7LPH
V V VPLQ PLQ PLQV
Roche Diagnostics
Status Notifier for cobas t 511 coagulation analyzer · Software version 1.0 · Quick Reference Guide · Version 1.0
Configuring the acoustic alarm 7
Configuring the acoustic alarm
You can activate or mute the acoustic alarm.
c When necessary
n 1 minute
j m The Status Notifier software is installed on the control
unit.
m The Status Notifier is connected via USB cable to the
control unit.
r To configure the acoustic alarm
1
In the Windows task bar, choose the button.
2
Choose the Status Notifier software indicated by the
traffic light icon.
3
Choose the desired option.
I Saving the option is not required.
&XVWRPL]H
$0

2
$0

(QDEOHDFRXVWLFDODUP
'LVDEOHDFRXVWLFDODUP
3
Roche Diagnostics
Status Notifier for cobas t 511 coagulation analyzer · Software version 1.0 · Quick Reference Guide · Version 1.0
8 Confirming an analyzer alarm
Confirming an analyzer alarm
If an analyzer alarm occurs, the Status Notifier light
changes to red, the acoustic alarm starts, and the
button appears on the monitor.
Button
Mute function To mute the acoustic alarm once it is triggered, choose
one of the following options:
On the monitor choose the mute button.
q You can choose the mute button in one of the
following ways:
o Select it with the mouse
o Use the screen stylus
o Use your finger
On the keyboard, press the shortcut key (Alt+Ctrl+M).
If the analyzer alarm is not confirmed, the acoustic alarm
restarts.
r To confirm an analyzer alarm
1
On the top-right of the work area, choose the
button or press the shortcut key (Alt+Ctrl+M).
Mute acoustic alarm
6\VWHPRYHUYLHZ
6WDQGE\
1
Roche Diagnostics
Status Notifier for cobas t 511 coagulation analyzer · Software version 1.0 · Quick Reference Guide · Version 1.0
Confirming an analyzer alarm 9
2
Check the alarm message.
3
Start remedy action.
When the reason of the alarm is solved, the Status
Notifier changes to green.
If the alarm persists, contact your Roche Service
representative.
8QFRQᚏUPHGPHVVDJHV
0HVVDJHV
6YHULW\ 6WDWXV (YHQWWLPH 0HVVDJH 0HVVDJHFRGH
$0 7UDQVIHUHUURU 9;
$0 $UFKLYHFDQQRWEH 9;
$0 5HDJHQWFDVVHWWHFRXOG 9;
$0 5HDJHQWFDVVHWWHFRXOG 9;
&RQᚏUP
6WDQGE\
/RJRᚎ
4
2
Roche Diagnostics
Status Notifier for cobas t 511 coagulation analyzer · Software version 1.0 · Quick Reference Guide · Version 1.0
10 Confirming an analyzer alarm
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Roche cobas t 511 Reference guide

Type
Reference guide

Roche cobas t 511 is a coagulation analyzer designed to provide fast and accurate results for a wide range of coagulation tests. It features a user-friendly interface, automated functions, and comprehensive quality control measures to ensure reliable results. With its compact design and throughput of up to 180 tests per hour, the cobas t 511 is ideal for laboratories of all sizes. Advanced automation features, such as automatic sample aspiration and clot detection, minimize hands-on time and reduce the risk of errors.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI