Moen WISNS002G1USA User guide

Moen
Brand
Moen
Model
WISNS002G1USA
Type
User guide

Moen WISNS002G1USA Smart Wireless Soil Sensor helps you conserve water and keep your lawn healthy by monitoring soil moisture levels and automatically adjusting your sprinkler system. It pairs with the Moen Smart Water App, allowing you to create custom watering schedules based on real-time soil conditions. The sensor is easy to install and can be placed up to 245 feet away from your controller. It's also durable and weather-resistant, so you can rely on it to keep your lawn looking its best all season long.

Moen WISNS002G1USA Smart Wireless Soil Sensor helps you conserve water and keep your lawn healthy by monitoring soil moisture levels and automatically adjusting your sprinkler system. It pairs with the Moen Smart Water App, allowing you to create custom watering schedules based on real-time soil conditions. The sensor is easy to install and can be placed up to 245 feet away from your controller. It's also durable and weather-resistant, so you can rely on it to keep your lawn looking its best all season long.

Use the label sheet provided on the inside of your
controller's front cover to take notes on the zone and
location your soil sensor is placed.
We recommend placing your soil sensor no further than
245 feet away from your controller for optimal performance.
Please note that obstructions such as walls, cement, trees,
and other barriers may weaken the signal strength of your
soil sensor and may result in loss of connection. For
controllers placed below grade such as a basement,
maintaining a high signal strength performance
is not guaranteed.
Contents:
Requirements:
STEP 1
BEFORE YOU BEGIN
STEP 2
Add your Smart Wireless
Soil Sensor to the App
Insert your Smart Wireless
Soil Sensor into the ground
Moen
®
Smart
Sprinkler Controller
(installed)
Smart Wireless
Soil Sensor
Smartphone
or tablet
Shovel or
hand trowel
5 minutes
to set-up
5
Install your soil sensor in moist or soft soil for easy
installation. If the soil is too hard - try wetting the ground
before installation or use a shovel or hand trowel.
Place your soil sensor within 1-2 feet of a sprinkler head
within the zone to ensure you can easily find it, should
you need to relocate it.
Refrain from hammering or forcing the sensor
in the ground.
1. Open the Moen Smart Water App
on your iOS or Android device.
2. Select your Smart Sprinkler Controller
3. Go to the Sensors tab at the top of the screen
4. Select
5. With the Moen logo facing you, tap the left side of the
soil sensor with the controller's magnetic faceplate to
pair your sensor.
6. Follow instructions in the App to add your Smart
Wireless Soil Sensor to a zone.
© 2023 Moen Incorporated. All rights reserved. MAIN22-1076. QSG00023.
Smart Wireless
Soil Sensor
WISNS002G1USA
Quick Start Guide
Need help?
We’ve got you covered.
USA / Canada: 1-844-633-8356
Mexico: 01-800-718-4345
Visit our customer support and service website
moen.com/contact
Learn more about Moen’s smart water products, including
FAQs on this product: moen.com/smart-home
Give us a call
Customer Support
Tips:
Add Wireless Soil Sensor
Use the label sheet provided on the inside of your
controller's front cover to take notes on the zone and
location your soil sensor is placed.
We recommend placing your soil sensor no further than
245 feet away from your controller for optimal performance.
Please note that obstructions such as walls, cement, trees,
and other barriers may weaken the signal strength of your
soil sensor and may result in loss of connection. For
controllers placed below grade such as a basement,
maintaining a high signal strength performance
is not guaranteed.
Contents:
Requirements:
STEP 1
BEFORE YOU BEGIN
STEP 2
Add your Smart Wireless
Soil Sensor to the App
Insert your Smart Wireless
Soil Sensor into the ground
Moen
®
Smart
Sprinkler Controller
(installed)
Smart Wireless
Soil Sensor
Smartphone
or tablet
Shovel or
hand trowel
5 minutes
to set-up
5
Install your soil sensor in moist or soft soil for easy
installation. If the soil is too hard - try wetting the ground
before installation or use a shovel or hand trowel.
Place your soil sensor within 1-2 feet of a sprinkler head
within the zone to ensure you can easily find it, should
you need to relocate it.
Refrain from hammering or forcing the sensor
in the ground.
1. Open the Moen Smart Water App
on your iOS or Android device.
2. Select your Smart Sprinkler Controller
3. Go to the Sensors tab at the top of the screen
4. Select
5. With the Moen logo facing you, tap the left side of the
soil sensor with the controller's magnetic faceplate to
pair your sensor.
6. Follow instructions in the App to add your Smart
Wireless Soil Sensor to a zone.
© 2023 Moen Incorporated. All rights reserved. MAIN22-1076. QSG00023.
Smart Wireless
Soil Sensor
WISNS002G1USA
Quick Start Guide
Need help?
We’ve got you covered.
USA / Canada: 1-844-633-8356
Mexico: 01-800-718-4345
Visit our customer support and service website
moen.com/contact
Learn more about Moen’s smart water products, including
FAQs on this product: moen.com/smart-home
Give us a call
Customer Support
Tips:
Add Wireless Soil Sensor
  • Page 1 1
  • Page 2 2

Moen WISNS002G1USA User guide

Moen
Brand
Moen
Model
WISNS002G1USA
Type
User guide

Moen WISNS002G1USA Smart Wireless Soil Sensor helps you conserve water and keep your lawn healthy by monitoring soil moisture levels and automatically adjusting your sprinkler system. It pairs with the Moen Smart Water App, allowing you to create custom watering schedules based on real-time soil conditions. The sensor is easy to install and can be placed up to 245 feet away from your controller. It's also durable and weather-resistant, so you can rely on it to keep your lawn looking its best all season long.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents