BlueBuilt BBFWM3250 Operating instructions

Type
Operating instructions

BlueBuilt BBFWM3250 is a wall mount for TVs, designed for solid brick, solid concrete, and drywall with wooden pillars. It comes with all the necessary hardware, including screws, plugs, washers, spacers, and a spirit level. The wall panel can be adjusted to fit different TV sizes, and the strings help to keep the TV securely in place. Installation requires two people and basic tools such as a screwdriver, drill, and hammer.

BlueBuilt BBFWM3250 is a wall mount for TVs, designed for solid brick, solid concrete, and drywall with wooden pillars. It comes with all the necessary hardware, including screws, plugs, washers, spacers, and a spirit level. The wall panel can be adjusted to fit different TV sizes, and the strings help to keep the TV securely in place. Installation requires two people and basic tools such as a screwdriver, drill, and hammer.

In the box
1
TV-frames,
2
bag of screws,
3
washers and spacers for the TV, spirit level
4
wall panel,
5
bag of screws and plugs for the wall,
6
velcro for your cables.
Your own tools
Cross-head screwdriver, pipe locator, 5 mm drill, 10 mm drill, pencil, tape,
measure, hammer, impact or concrete drill and a cup of coffee.
30 minutes 2 people 4 coffees
WALL MOUNT.
Brace yourself.
1 2
3
4
6
12
3
4
5
6
Drill with precision by first using the 5mm
drill, and then the 10mm drill. Drill as deep
as the screws
5
are in length. Hammer the
plugs
5
into the drill holes.
Fasten the wall panel
4
to the frames and
measure the distance from the bottom of
the TV to the drill holes in the wall panel.
Secure the wall panel
4
to the wall. Use
the spirit level for accuracy. Lift the TV with
2 people and attach it to the wall panel. Pull
down the strings to lock the television in
place. Keep the strings out of the way by
tying a knot or taping them in place, for
example.
Place the spirit level (M-L)
3
on the wall
panel
4
and use it to draw 4 drill holes at
the level of the X you drew in step 3.
Decide where to place your TV on the wall
and mark where the bottom of your tv
should be. Move your pencil up by the same
distance you just measured and draw an X.
Prior to drilling:
Use the pipe locator to check
if there aren’t any pipes or
cables behind the wall.
Place your TV on a blanket. Look in bags
M-A through M-H
2
for the screw that fits
your TV. You only need 1 set of screws.
Secure the frames
1
as pictured. Extra
space? Place washer (M-I)
3
or spacer
(M-J of M-K)
3
in between.
Suitable surface area:
Solid brick
Solid concrete
Drywall with wooden
pillars behind it
BBFWM3250
Coolblue isn’t liable for any damage, accidents,
or arguments with boy/girlfriends as a result of
incorrect installation. Not sure if you can do this
on your own? Ask a skilled installation expert
for advice.
INSTALL THE FRAMES
1. MEASURE
2. DECIDE ON PLACEMENT
3.
DRILL
5. HANG THE TV
6.
MARK DOWN THE WALL
4.
CHECKLIST.
You’re 50% there.
Don’t cut off the strings:
You’ll need them if you want
to take down the TV from the
wall.
Write down the size: cm
  • Page 1 1
  • Page 2 2

BlueBuilt BBFWM3250 Operating instructions

Type
Operating instructions

BlueBuilt BBFWM3250 is a wall mount for TVs, designed for solid brick, solid concrete, and drywall with wooden pillars. It comes with all the necessary hardware, including screws, plugs, washers, spacers, and a spirit level. The wall panel can be adjusted to fit different TV sizes, and the strings help to keep the TV securely in place. Installation requires two people and basic tools such as a screwdriver, drill, and hammer.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI