2. Yale
  3. Access App

Yale Access App User guide

  • Hello! I've reviewed the provided user guide for the Yale Smart Lock. This document provides instructions on how to install and set up your smart lock using the Yale Access app. I'm ready to answer your questions regarding installation, smart module usage, and any other details related to the smart lock described in this document.
  • When should I insert batteries?
    Is the app required for installation?
    Where is the QR code located?
Quick Start Guide
WARNING: Do not insert batteries until prompted by the app.
Download the Yale Access App
Tip: Have an August account?
Log in using your existing username and password.
1
Install the Lock
3
Tip: If you have a Bluetooth lock with no Smart
Module you can always add one!
Visit ShopYaleHome.com/SmartModule
If You Have a Smart Module
Insert the module into the slot above the
batteries and follow the installation steps
in the app.
Using the app is a requirement for this step.
The app will guide you through step-by-step
installation instructions.
4
Tap ‘Set Up A Device’
EXAMPLE CODE
Scan the Yale Access QR code located
inside the lock’s battery compartment, or
found below.
2
ISL-2155-00-000
Tip: Once your lock is installed, insert
batteries as the last step.
/