2. Crystorama
  3. 2245-BF_NOSHADE

Crystorama 2245-BF_NOSHADE User manual

  • Hello, I am a chat assistant. I have reviewed the assembly instructions document for the Crystorama 2245-BF_NOSHADE light fixture. This document provides detailed steps on how to assemble the fixture, including connecting the iron tubes, attaching the top square ring and arm assemblies, and installing the fabric shade and bulbs. I'm ready to answer any questions you might have about it!
  • What type of bulbs should I use?
    Is this fixture safe for damp locations?
    What should I do before assembling this fixture?
ASSEMBLYINSTRUCTIONMODEL#2245-BF_NOSHADE
CRYST
RAMA
WARNING:
ElectricalDanger TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
Howtoinstall
9.Installthebulbs(notincluded)intothesocket.
Youwillneed -CandelabraBaseBulb4
40WattsRecommended60WattsMax.
USELEDBULBSFOREXTENDEDUSE
This fixture is Dry rated
3.Slipthecenterrodalongwireandthreadintothe
couplinglocatedonthetopofthelightcluster.
Makesurethattheirontubesareassembledstraight
relativetothetopandbottomringbeforetightening
thetopscrewsandthebottomfinials.
5.Spreadthearmssothatthearmsareatequal
distancefromeachother.
8.Installthefabricshadeontothecandlesleeve.
4.Slipthearmassemblyalongwireandthreadinto
thecenterrod.
7.Sliptheloopalongwireandthreadontothenipple
ofarmassembly.
ARMS
CHAIN
LOOP
NIPPLE
SHORTSCREWS
(Theshortscrewsfromtopsquarering)
(Thelongscrewsfromirontubes)
LONGSCREWS
TOP SQUARERING
FABRIC SHADE
IRONTUBES
CANDLESLEEVE
CENTER
ROD
BOTTOM
SQUARERING
BOTTOMFINIALS
LIGHTCLUSTER
COUPLING
6’’
3/4’’
21’’
16’’
95’’
FABRIC
SHADE
4’’
5-1/2’’
4-1/2’’
1.Placethethreadedendofairontubeintoaholeon
thebottomsquarering.Securewithafinial.Repeat
thisfortheotherirontubes.
2.Removethelongscrewfromeachoftheirontubes.
Aligntheholesonthetopsquareringwiththeholes
thatthelongscrewswereremovedfrom.Tighten
eachscrewintotheholestosecurethetopsquare
ringandthe(4)irontubestogether.
6.Removetheshortscrewfromeachoftheholeson
thetopsquarering.Aligntheholesonthetabsof
thearmassemblywiththeholesonthetopsquare
ringandsecuretogetherusingtheshortscrews
thatwereremoved.
(Optional)
Crystorama.com
CRYST
RAMA
L I G H T I N GT H EW A YF O RS I X T YY E A R S
PartNumber
PartNumbers
A.(1)-Mountinghardware
B.(1)-CanopyW6’’xW6’’xH3/4’’ #XRF2240BFCAN6IN
J.(1)-TopsquareringW13-5/8’’xW13-5/8’’xH1/2’’ #XRF2245BFTOPRING
I.(4)-Longscrew
C.(1)-Collarring
H.(8)-Shortscrew
ASSEMBLYINSTRUCTIONMODEL#2245-BF_NOSHADE
N.(4)-FabricshadeW4-1/2’’xH5-1/2’’ #XRF2245SHA5.5IN
O(A).(4)-Candlesleeve-BFW7/8’’xL3-3/8’’ #XRF2241BFCDL3.375IN
A
B
CD
E
F
H
I
J
K
L
M
N
O
D.(1)-Collarloop
E.(1)-Chain-72’’,4mmthick#XRF2240BFCHA4.0MM
F.(1)-Loop#XRF2240BFLOOP
G.(1)-PipeD1/2’’x4-3/8’’
K.(4)-IrontubeL12-3/4’’xH1/2’’ #XRF2245BFIRT
L.(1)-BottomsquareringW15-3/4’’xW15-3/4’’xH1/2’’ #XRF2245BFBOTRING
M.(4)-Bottomfinial#XRF2243BFFIN
O(B).(4)-Candlesleeve-WHW7/8’’xL3-3/8’’ #XRF2241WHCDL3.375IN
Crystorama.com
/