American Standard 1748.218 User manual

Brand: American Standard

Model: 1748.218

Type: User manual

H63

COLONY™ 5-1/2' x 32" w/INTEGRAL APRON

WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

Revised 5/06

COLONY™ 5-1/2' x 32" WHIRLPOOL AND

BATHING POOL with INTEGRAL APRON

❏ 1748.218 Whirlpool featuring System I,

Left Hand Outlet

❏ 1748.118 Whirlpool featuring System I,

Right Hand Outlet

• Acrylic with  berglass reinforcement

• Integral apron with removable access panel

• Integral 3-sided tile/water retention  ange

• Molded-in back rest

• Dual, molded in arm rests

• 1.0 HP single speed, self-draining pump/motor

• Factory installed power cord with plug

• Six multi-directional and  ow-adjustable jets

• Deck-mounted air switch On/Off

• Two air volume controls

• Factory installed and tested whirlpool system

EverClean™ Whirlpool Massage featuring System I

❏ 1748.218C Whirlpool featuring System I,

Left Hand Outlet

❏ 1748.118C Whirlpool featuring System I,

Right Hand Outlet

• Same as above except with the EverClean™

whirlpool system featuring Antimicrobial

AlphaSan

❏ 1748.202 Bathing pool only, Left Hand Outlet

❏ 1748.102 Bathing pool only, Right Hand Outlet

Nominal Dimensions:

(66" x 32" x 19-1/2")

1676 x 813 x 495mm

Compliance Certi cations -

Meets or Exceeds the Following Speci cations:

• Underwriters Laboratories - Hydromassage

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

AND PRODUCT SPECIFICATIONS

To Be Speci ed - Required:

❏ Color:

❏ Bath Faucet: (specify  nish)

❏ Bath Drain: 1583.470 (specify  nish)

To Be Speci ed - Optional:

❏ Jet Trim Ring Kit: 9860.200-two per kit (specify  nish)

for Body Massage Jets only

For color/ nish availability and other faucet choices, please

see the Product Selector and Pricing Guide.

H64

COLONY™ 5-1/2' x 32" w/INTEGRAL APRON

WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

Revised 5/06

66” (1676mm)

WATER RETENTION

FLANGE (3 SIDES)

FINISHED

WALL

7-1/4” (184mm)

C/L OF DRAIN

3/4” (19mm)

15-1/2"

(394mm)

32”

(813mm)

1-1/2”

(38mm)

C/L OF

SUPPLIES

2-3/8 ± 1/2

(60 mm ± 13 mm)

C/L OF DRAIN

OUTLET

19-1/4

(489mm)

REF.

DIM

1" WATER

RETENTION

FLANGE

(3 SIDES)

19-1/2

(459mm)

1-1/2 O.D.TAILPIECE

BATH

SUPPORT

MATERIAL

ROUGH

FLOOR

FINISHED

WALL

TOP OF

DECK

3-1/4

(83mm)

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

65 & 78

(1651 & 1981mm)

C/L OF

OVERFLOW

C/L OF

SPOUT

C/L OF

VALVES

C/L OF

SHOWER ARM

2-3/4

(70mm)

4-5/8

(117mm)

1-1/2 N.P.T.M.

THREADS

UNDERSIDE

OF DECK

ON/OFF SWITCH

PUMP

(305mm)

OPT.

(102mm)

LEVELING

STRINGER

NOT FOR

SUPPORT

TILING

FLANGE

66” (1676mm)

WATER RETENTION

FLANGE (3 SIDES)

FINISHED

WALL

7-1/4” (184mm)

C/L OF DRAIN

3/4” (19mm)

15-1/2"

(394mm)

32”

(813mm)

1-1/2”

(38mm)

C/L OF

SUPPLIES

2-3/8 ± 1/2

(60 mm ± 13 mm)

C/L OF DRAIN

OUTLET

19-1/4

(489mm)

REF.

DIM

1" WATER

RETENTION

FLANGE

(3 SIDES)

19-1/2

(459mm)

1-1/2 O.D.TAILPIECE

BATH

SUPPORT

MATERIAL

LEVELING

STRINGER

NOT FOR

SUPPORT

ROUGH

FLOOR

FINISHED

WALL

TOP OF

DECK

3-1/4

(83mm)

(305mm)

OPT.

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

65 & 78

(1651 & 1981mm)

C/L OF

OVERFLOW

(102 mm)

C/L OF

SPOUT

TILING

FLANGE

C/L OF

VALVES

C/L OF

SHOWER ARM

2-3/4

(70mm)

4-5/8

(117mm)

1-1/2 N.P.T.M.

THREADS

UNDERSIDE

OF DECK

66 x 32 x 19-1/2 In.(1676 x 813 x 495mm)

120 Lbs. (54 Kg.)

537 Lbs. (244 Kg.)

50 Gal. (189 L.)

46 Gal. (174 L.)

18 x 48 In. (457 x 1219mm)

26 x 59 In.(660 x 1499mm)

12-1/2 In. (318 mm)

37 Lbs./Sq. Ft. (179 Kgs/Sq. m.)

20.8

35.3

GENERAL SPECIFICATIONS FOR 1748 WHIRLPOOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

WHIRLPOOL MIN. OPERATING VOL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

1.1 HP, 9.9 AMPS, 120V.SYSTEM I PUMP

66 x 32 x 19-1/2 In.

(1676 x 813 x 495mm)

100 Lbs. (45 Kg.)

517 Lbs. (235 Kg.)

50 Gal. (189 L)

18 x 48 In. (457 x 1219mm)

26 X 59 In. (660 x 1499mm)

12-1/2 In. (318mm)

35 Lbs./Sq.Ft. (173 Kgs./Sq.m)

25.6

29.7

GENERAL SPECIFICATIONS FOR 1748 BATHING POOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

NOTES:

BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND

ENCLOSING MATERIAL BY OTHERS.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2776.118).

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of  xtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and

A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

American Standard 1748.218 User manual

American Standard 1748.218 User manual

American Standard 1748.218 User manual

Related papers