Furuno GP-1850DF is a versatile marine navigation system that combines the functionality of a color GPS plotter, sounder, and DGPS receiver. With its advanced features, the GP-1850DF is an excellent choice for both recreational and commercial mariners.
Key Features:
- 10.4-inch color LCD display provides a clear and detailed view of charts, sounder data, and other navigation information.
- Built-in GPS receiver provides accurate positioning and navigation data.
- DGPS capability enhances positioning accuracy for even greater precision.
- Detailed electronic charting capabilities allow you to view and navigate using a variety of chart formats, including C-MAP MAX and Navionics.
Furuno GP-1850DF is a versatile marine navigation system that combines the functionality of a color GPS plotter, sounder, and DGPS receiver. With its advanced features, the GP-1850DF is an excellent choice for both recreational and commercial mariners.
Key Features:
- 10.4-inch color LCD display provides a clear and detailed view of charts, sounder data, and other navigation information.
- Built-in GPS receiver provides accurate positioning and navigation data.
- DGPS capability enhances positioning accuracy for even greater precision.
- Detailed electronic charting capabilities allow you to view and navigate using a variety of chart formats, including C-MAP MAX and Navionics.
Turning the Power On/Off
Press and hold down the [POWER/BRILL]
switch.
Adjusting Tone and
Brilliance
1. Press the [POWER/BRILL] key with a touch-
and-release action.
2. Press the appropriate soft key or cursor pad
to adjust.
♦PLOTTER♦
DGPS 3D
NAV
WPT
COURSE
UP
ZOOM
OUT
ZOOM
IN
NORTH
UP
135° 12.345’ E
34° 12.345’ N
SPD
CSE
16.3kt
245.8°
BRIDGE
FISH
002WP
Nav information
window
Course bar
Functions for
soft key
Track
Own ship
mark
Current display mode
(north-up)
Icon (alarm)
GPS status
Waypoint name
Waypoint mark
Typical indications on the plotter display
Displaying Electronic
Chart at Power Up
Insert mini chart card in slot and turn on the
power.
Selecting Nav Data
Displays
Press the soft key NAV L/L (WPT, S/C).
Changing Chart Scale
Press the soft key [ZOOM IN] to enlarge;
[ZOOM OUT] to shrink.
Turning the Cursor On/Off
Cursor On: Operate the cursor pad.
Cursor Off: Press the soft key [CENTER].
Shifting the Cursor
Operate the cursor pad.
Shifting the Display
Press and hold down the cursor pad.
COLOR DGPS/PLOTTER/SOUNDER GP-1850DF
COLOR GPS/PLOTTER/SOUNDER GP-1850F
Operator’s Guide
The purpose of this operator's guide is to provide the basic operating procedures for this equipment.
For detailed information, refer to the operator's manual.
2
Returning Own Ship to
Screen Center
Press the soft key CENTER.
Changing the Plot Interval
1. Press the [MENU] key to show the main
menu.
2. Press the soft key CHART SETUP OPTIONS
to show the chart setup options menu.
CHART
SETUP
DGPS 3D
CHART OFFSET
CHART DETAILS
TRACK CONTROL
RETURN
3. Press the soft key TRACK CON-
TROL.
4. Press ▲ or ▼ to select TIME INTERVAL or
DIST INTERVAL.
5. Press the soft key EDIT.
6. Key in the interval desired.
Entering Mark
1. Press the [MENU] key and the soft key DIS-
PLAY OPTIONS.
2. Press ▼ to select OPERATION MODE.
3. Press the soft key EDIT.
4. Press ▼ to select FISHING.
5. Press the soft key ENTER or the [ENTER]
key.
6. Press the PLOT key to display the plotter
display.
7. Press the [HIDE/SHOW] key to display the
soft key MARK ENTRY.
8. Press the soft key MARK ENTRY.
When the cursor is displayed, a mark which its
shape and color are presetted is entered to
cursor position. When the cursor is not dis-
played, a mark is entered to own ship position.
The mark attributes can be changed by the soft
key MARK EDIT.
Stopping, Restarting
Recording of Track
1. Press the [MENU] key.
2. Press the soft key CHART SETUP OP-
TIONS.
3. Press the soft key TRACK CONTROL.
4. Press the soft key STOP TRACK. NOT
TRACKING indication appears at the bottom
of the display.
To restart recording, press the soft key START
TRACK.
Entering Waypoints at
Own Ship Position
Press the [SAVE/MOB] key with a touch-and-
release action.
Entering Waypoints By
Cursor
1. Press the [WPT/RTE] key.
2. Press the soft key WAYPOINTS.
3. Press the soft key WAYPOINT BY CURSOR
to show the plotter display.
4. Operate the cursor to place the cursor on
the position you want to enter the waypoint.
5. Press the soft key NEW WPT.
6. Press the soft key SAVE.
Registering Routes
1. Press the [WPT/RTE] key.
2. Press the soft key ROUTES.
3. Press the soft key NEW ROUTE.
4. Press the soft key LOCAL LIST or ALPHA
LIST.
5. Press ▲ or ▼ to select a waypoint.
6. Press the soft key ADD WPT.
7. Repeat step 5-7.
8. Press the soft key SAVE.
3
Setting Destination by
Waypoint Number
1. Place the cursor on the waypoint you want
to go on the plotter display.
2. Press the soft key GO TO WPT.
Cancelling Destination
1. Press the [WPT/RTE] key.
2. Press the soft key LOG.
3. Press ▲ or ▼ to select the waypoint desired.
4. Press the soft key STOP.
5. Press the [ENTER] key to select YES on the
confirmation window.
6. Press the soft key RELEASE to show the
confirmation window.
7. Press the [ENTER] key to select YES.
Setting Arrival Alarm
1. Press the [ALARM] key to show the alarm
menu.
DGPS 3D
ALARM1
EDIT
CLEAR
ALARM
ALARM INFORMATION
AUDIO ALARM
ARRIVAL ALARM
ANCHOR ALARM
PROXMTY ALARM
XTE ALARM
SPEED ALARM
ON
ON 0.100nm
ON 0.050nm
ON
ON 0.100nm
OVER/UNDER
12.5 ~ 15.0kt
NO ALARM
NEXT
PAGE
s
2. Select ARRIVAL ALARM.
3. Press the soft key EDIT
4. Press ▲ or ▼ to select ON.
5. Key in the alarm range.
6. Press the soft key ENTER.
Silencing audible alarm: [CLEAR] key.
Disabling alarm: Select OFF at step 3 above.
♦SOUNDER♦
SNDR
FUNC
SHIFT
GAIN
RANGE
SOUNDER
135° 12.345’ E
34° 12.345’ N
SPD
CSE
16.3kt
245.8°
MODE/
FREQ
50k
DGPS 3D
Nav information
window
Color
bar
Functions for
soft key
Variable
Range
Marker
(White)
Depth scale
Tx frequency
GPS status
Depth
20
30
40
50
30
20
10
0
Temp.
scale
Water
temp.
graph
Water
temp.
display
54.0m
Typical indications on
normal video sounder display
Showing the Sounder
Display
Press the [SNDR] key.
Each pressing of this key toggles the display
among Plotter/Sounder display, Normal sounder
display and Dual-frequency display.
Selecting the Sounder
Display Mode
1. On the normal display, press the soft key
SNDR FUNC.
2. Select the mode desired.
3. Press the soft key RETURN.
Automatic Sounder
Operation
1. On the normal or dual-frequency display,
press the soft key MODE/FREQ. When the
plotter/sounder display is displayed, press the
soft key SNDR, and then press the soft key
MODE/FREQ.
2. Select AUTO.
3. Press the soft key RETURN.
Manual Sounder
Operation
1. On the normal or dual-frequency display,
press the soft key MODE/FREQ. When the
plotter/sounder display is displayed, press the
soft key SNDR, and then press the soft key
MODE/FREQ.
2. Select MANUAL.
3. Press the soft key RETURN.
Adjusting the gain
Press the soft key GAIN, and then press ▲ or
▼ to set the gain.
Selecting range
Press the soft key RANGE, and then press ▲
or ▼ to select range.
Shifting the basic range
Press the soft key SHIFT, and then press ▲ or
▼ to shift the basic range.
Suppressing Interference
1. Press the [MENU] key, and then press the
soft key SOUNDER SETUP OPTIONS to
open the sounder setup menu.
DGPS 3D
SOUNDER
SETUP
NOISE LIMITER
CLUTTER
WHITE MARKER
HUE
SIGNAL LEVEL
PICTURE ADVANCE
EDIT
HOLD
EDIT
RANGE
SETUP
SYSTEM
SETUP
RETURN
OFF
4
0
1
OFF
1/1
s
2. Press ▲ or ▼ to select NOISE LIMITER.
3. Press the soft key EDIT.
3. Press ▲ or ▼ to select NL1, NL2 or NL3.
4. Press the soft key RETURN.
Suppressing Low Level
Noise
1. Press the [MENU] key, and then press the
soft key SOUNDER SETUP OPTIONS to
show the sounder setup menu.
2. Press ▲ or ▼ to select CLUTTER.
3. Press the soft key EDIT.
4. Press ▲ or ▼ to select clutter rejection level.
5. Press the soft key RETURN.
Selecting Picture Advance
Speed
1. Press the [MENU] key, and then press the
soft key SOUNDER SETUP OPTIONS to
show the sounder setup menu.
2. Press ▲ or ▼ to select PICTURE ADVANCE.
3. Press the soft key EDIT.
4. Press ▲ or ▼ to select speed.
5. Press the soft key RETURN.
Activating Sounder Alarms
1. Press the [ALARM] key, and then press the
soft key NEXT PAGE to show the alarm 2
menu.
DGPS 3D
ALARM2
EDIT
CLEAR
ALARM
ALARM INFORMATION
BOTTOM ALARM
FISH (B/L) ALARM
FISH (NORMAL)
TEMP. ALARM
OFF
OFF
OFF
OFF
NO ALARM
RETURN
s
2. Press ▲ or ▼ to select the alarm among
BOTTOM, FISH (B/L), FISH (NORMAL) and
TEMP. (temperature).
3. Press the soft key EDIT.
4. Press ▲ or ▼ to select on, and then key in
the range to set.
5. Press the soft key ENTER.
PUB.NO.OSE-43950-D
(0005,TATA) GP-1850F/1850DF
4
-
1
-
2
-
3
-
4
Furuno GP-1850DF is a versatile marine navigation system that combines the functionality of a color GPS plotter, sounder, and DGPS receiver. With its advanced features, the GP-1850DF is an excellent choice for both recreational and commercial mariners.
Key Features:
- 10.4-inch color LCD display provides a clear and detailed view of charts, sounder data, and other navigation information.
- Built-in GPS receiver provides accurate positioning and navigation data.
- DGPS capability enhances positioning accuracy for even greater precision.
- Detailed electronic charting capabilities allow you to view and navigate using a variety of chart formats, including C-MAP MAX and Navionics.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Haiyang AQUA HGP-660 User manual
-
Raymarine L1250DRC Owner's Handbook Manual
-
Garmin GPSMAP® 235 Sounder User manual
-
Garmin GPSMAP® 185 Sounder User manual
-
Standard Horizon CP175C User manual
-
Garmin GPSMAP 135 Sounder User manual
-
-
Raytheon V8010 Operating instructions
-
Raymarine DSM300 User manual
-
VDO MAP 7 V GPS User manual
