2. KOAMTAC
  3. SKXPro Pistol Grip Charging Cradle

KOAMTAC SKXPro Pistol Grip Charging Cradle, KDC470 Pistol Grip Charging Cradle User guide

  • Hello! I am an AI chatbot trained to assist you with the KOAMTAC SKXPro Pistol Grip Charging Cradle User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1 x SKXPro 5-Slot Pistol Grip Cradle or
1 x KDC470/475 5-Slot Pistol Grip Cradle
1 x 12V/10A DC Power Adaptor
12V/10A
ADAPTOR
With NPB Spacer
SKXPro and KDC470/475 Pistol Grip
Charging Cradle Mini Guide
1 x SKXPro Pistol Grip Cradle or
1 x 12V/2A DC Power Adaptor
1 x KDC470/475 Pistol Grip Cradle
1 x USB TYPE-C Cable
What’s in the Box? 1-Slot Cradle
What’s in the Box? 5-Slot Cradle
Charging via DC Connector (5-Slot)Charging via DC Connector (1-Slot)
Cradle Power LED Status
Battery LED Status
Main Power
Status LED
Green : Always on when the cradle is powered on
Orange : Charging
Green : Fully charged
6000mAh Battery
Status LED
1130mAh Battery
Status LED
12V/2A
ADAPTOR
Connect the power adaptor to the DC jack on the back of
the 5-Slot Charging Cradle (B). Place the SKXPro or KDC470
/475 Pistol Grip on the charging cradle to begin charging.
Connect the power adaptor to the DC jack on the back of
the 1-Slot Charging Cradle (A). Place the SKXPro or KDC470
/475 Pistol Grip on the charging cradle to begin charging.
How to Charge the SKXPro Pistol Grip
Mount the SKXPro Pistol Grip in accordance with
the guides on the top of the cradle. (C)
SKXPro Pistol Grip LED Status
Orange : Charging
Green : Fully charged
How to Charge the SKXPro 1.0W UHF Pistol Grip
Mount the SKXPro 1.0W UHF Pistol Grip in accordance
with the guides on the top of the cradle. (D)
Pistol Grip
Status LED
1.0W UHF
Pistol Grip
Status LED
Tilt the battery as shown in the figure below and insert the
battery into the battery slot. (G)
6000mAh Battery Charging
How to Charge the KDC470/475 Pistol Grip
Mount the KDC470/475 Pistol Grip in accordance with
the guides on the top of the cradle. (E)
Tilt the battery as shown in the figure below and insert the
battery into the battery slot. (H)
1130mAh Battery Charging KDC470/475 Pistol Grip LED Status
Orange : Charging
Green : Fully charged
Pistol Grip
Status LED
1.0W UHF
Pistol Grip
Status LED
How to Charge the KDC470/475 1.0W UHF Pistol Grip
Mount the KDC470/475 1.0W UHF Pistol Grip in accordance
with the guides on the top of the cradle. (F)
* The 1130mAh battery is only used for KDC470/475
models.
G H
/