123
UserManual
VISO10–MSF(UK)
1.Features
‐EasytoReadandUnderstandTimedisplay
‐PerpetualCalendarUptoYear2099
‐Dayofweek&Monthin8languagesuser
selectable
2.UnitAppearance
PartA‐LCD PartB‐Button
A1:DayoftheWeek
A2:RadioControlIcon
A3:Time
A4:Month
A5:Date
A6:Year
B1:“MODE/
”Button
B2:“▼”Button
B3:“RESET”Button
B4:“▲”Button
B5:“WAVE/
”Button
PartC‐Structure
C1:HangingHole
C2:BatteryDoor
C3:Stand
3.Gettingstarted:
z OpenthebatteryCover(C2).
z Insert 2 x AA size alkaline batteries observing
polarity[“+”and“–“marks].Thereis“click”sound
wheninsertbatteriestoreminduserthebatteries
wasinsertedcorrectly.
z Replacethebatterycompartmentcover.
z Place the unit onto flat surface; the unit is ready
forusenow.
4.TimeSetting
4.1ManualTimeSetting:
z In time display, hold “MODE/ ” button (B1)
for 3 seconds to enter Clock/Calendar setting
Mode.
z Press“ ▼” (B2) or “▲” (B4) button to adjust the
settingand press“MODE”button (B1)to confirm
eachsetting.
z (By keeping the “▼” (B2) or “▲” (B4) button
pressed, could accelerate the process and reach
thedesiredvaluemorequickly)
z The setting sequence is shown as follow:,
Weekday&MonthLanguage,12/24Hr,RCC(Radio
Clock) ON/OFF, Time Zone, Hour, Minute, Year,
Month,Da y,DST.
z There are 8 languages, English, German, French,
Spanish, Italian, Dutch, Polish and Swedish, for
day‐of‐week&Month.
4.2RadioControlledTime:
z After the start‐up of the unit, the clock
automatically starts to scan the MSF time signal.
RadioControlIcon“
”(A2)flashesonLCD.
(A2)flashes
Indicating
nowisreceiving
MSFsignal
(A2)turnson
Indicatingsignalreceived
successfully
(A2)disappears
Indicatingsignalreception
failed
z The clock automatically synchronizes with the
MSFradiosignaleverydayat2.00amtomaintain
accuratetimekeeping.Ifsynchronizationwiththe
MSF radio signal fails, “
” on LCD disappears
and the clock then attempts to synchronize with
theMSFradiosignalat3.00amand4am.
z The clock can be set to scan the radio signal
manually by holding “
” button (B5) for 3
seconds. Each reception takes around several
minutes. Ifreceptions fail, scanning stops. (“
”
on LCD disappear) and repeats again on next full
hour. E.g. scanning failed at 8:20a.m. It will scan
againat9:00a.m.
z Stop scanning MSF radio signal by holding “ ”
button(B5)for3seconds.
z “DST”shownon the LCD ifitisinDaylightSaving
TimeMode.
Note:
AllSettingmodewillautomaticallyexitinaround15
secondswithoutanyadjustment.