Marine Electrical Prod
ucts
12 Volt Plug
PN 1010
Blue Sea Systems Inc. p 360.738.8230
425 Sequoia Drive f 360.734.4195
Bellingham, WA 98226 USA [email protected]
www.bluesea.com
980012720 Rev.001
Installation (cont.)
GUARANTEE: Blue Sea Systems stands behind its products for as long
as you own them. Find detailed information at www.bluesea.com/about.
For customer service, call 800-222-7617.
1
2
3
4
Remove
rubber ring
Remove
fuse cap
Remove
fuse holder,
spring,
and fuse
Remove
assembly
screw
Corrosion resistant materials to ensure solid contact
and low voltage drop
• Designed to withstand the rigors of wet environments and constant vibration
• Nickel plated copper alloy used for all current carrying components
• Plug has a sealing ring to keep out spray and make it seat rmly in the socket
Specications
Voltage Nominal 12V DC
Amperage Maximum Operating 10A DC
5
6
7
8
Separate
case halves
Remove strain relief
and thread wiring
through opening
Connect wiring
to positive and
negative terminals,
and reinstall
strain relief
Reassemble
all components
NEGATIVE CLAMP
POSITIVE CLAMP
STRAIN RELIEF
Installation
-
1
Blue Sea Systems 1015 Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Blue Sea Systems 3131 Operating instructions
-
-
-
-
-
-
-
Blue Sea Systems 1839 Operating instructions
-
Blue Sea Systems 8082 Operating instructions
-