2. GW Instek
  3. GRA-423

GW Instek GRA-423 User manual

  • Hello! I've analyzed the GW INSTEK GRA-423 Assembly Manual, which describes how to assemble the rack mount for use with APS-7000 Series AC power sources. I understand the assembly steps and the included components. Feel free to ask me any questions you have about the GRA-423 rack mount or the compatible power sources.
  • What series of AC power sources is the GRA-423 rack mount compatible with?
    How many power sources can be used with the GRA-423 rack adapter?
    What rack size does the GRA-423 accommodate?
Rack Adapter Panel
GRA-423
Assembly Manual
GW INSTEK PART NO. 82RA-42300M01
This assembly manual contains proprietary information, which is protected by copyrights. All rights are
reserved. No part of this manual may be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER
GRA-423 Assembly Manual
GRA-423
The GRA-423 rack mount is suited for use with the APS-7000 Series AC power
sources. Only one power source can be used with the GRA-423 rack adapter. The
GRA-423 will accommodate a 2U-sized rack.
Rack Mount Adapter Component List
Description
Please check to make sure all the components of the
GRA-423 rack mount kit are provided.
Item
Description
QTY
1
SCREW FMS 4*10 ISO, N ,RoHS
4
2
SCREW FMS 5*10 ISO, N ,RoHS
4
3
CA GRA-423 2U
HANDLE ,AL ,RoHS
2
4
CA GRA-423 2U LEFT
BRACKET ,RoHS
1
5
CA GRA-423 2U RIGHT
BRACKET ,RoHS
1
GRA-423 Assembly Manual
3
Assembly
Initial setup
1. Screw the handles (62RA-423HD101) into the side
brackets (left: 62RA-423HP101, right: 62RA-423HP201)
using (593B-05010NS1) screws.
2. Screw the brackets to the side panels on the APS-7000
using the (593B-04010NS1) screws.
Specification
4
Specification
Rack Dimensions
APS-7100
APS-7050
/