GW Instek GRA-413/414 User manual

GW Instek
Brand
GW Instek
Model
GRA-413/414
Type
User manual

GW Instek GRA-413/414

The GW Instek GRA-413/414 Rack Adapter Panel is designed to mount your instrument into a standard 19-inch rack. It is compatible with both EIA and JIS rack standards and can accommodate instruments with a height of 3U. The panel is made of high-quality steel and has a durable powder-coat finish. It includes all the necessary hardware for mounting your instrument, including rack screws, washers, and nuts.

The GRA-413/414 Rack Adapter Panel is a versatile and convenient way to mount your instrument in a rack. It is perfect for use in laboratories, workshops, and other industrial settings where space is limited.

GW Instek GRA-413/414

The GW Instek GRA-413/414 Rack Adapter Panel is designed to mount your instrument into a standard 19-inch rack. It is compatible with both EIA and JIS rack standards and can accommodate instruments with a height of 3U. The panel is made of high-quality steel and has a durable powder-coat finish. It includes all the necessary hardware for mounting your instrument, including rack screws, washers, and nuts.

The GRA-413/414 Rack Adapter Panel is a versatile and convenient way to mount your instrument in a rack. It is perfect for use in laboratories, workshops, and other industrial settings where space is limited.

Rack Adapter Panel
GRA-413 and GRA-414
Assembly Manual
GW INSTEK PART NO. 82RA-41400MA1
This assembly manual contains proprietary information, which is protected by copyrights. All rights are
reserved. No part of this manual may be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER
GRA-413 and GRA-414 Assembly Manual
A. GRA-413 Part Details and Assembly:
1. EIA Part Details:
ITEM
Part NO.
Description
QTY
1
62RA-413HP101
EIA BRACKET 3U
2
2
594B-W3008NS1
M4*8
4
2. JIS Part Details:
ITEM
Part NO.
Descr iption
QTY
1
62RA-413HP201
JIS BRACKET 3U
2
2
62RA-413HP301
JIS RACK HP
1
3
594B-W008NS1
M3*8
4
4
594B-W3008NS1
M4*8
4
GRA-413 and GRA-414 Assembly Manual
B. GRA-414 Part Details and Assembly:
1. EIA Part Details:
ITEM
Part NO.
Descr iption
QTY
1
59CA-04017NS1
Rack Screw
3
2
62RA-410HP201
Front Bracket
1
3
62RA-414HP201
BLANK PANEL
1
4
592B-W3008NS1
PMS-W-3*8
1
5
62RA-410HP101
Middle Bracket
1
6
62RA-410HPAA1
EIA BRACKET 3U
2
7
593B-03008NS1
FMS-3*8
5
8
62RA-414RC101
Right Bracket
1
9
593B-03005NS1
FMS-3*5
4
10
62RA-414LC101
Left Bracket
1
11
62RA-414HP401
Rear Bracket
1
12
599B-03006NS1
IMS 3*6
4
13
62RA-414HP101
Rack HP
2
14
594B-W3008NS1
BMS-W-3*8
2
GRA-413 and GRA-414 Assembly Manual
2. JIS Part Details:
ITEM
Part NO.
Descr iption
QTY
1
59CA-04017NS1
Rack Screw
3
2
62RA-410HP201
Front Bracket
1
3
62RA-414HP201
BLANK PANEL
1
4
592B-W3008NS1
PMS-W-3*8
1
5
62RA-410HP101
Middle Bracket
1
6
62RA-410HPBA1
JIS BRACKET 3U
2
7
593B-03008NS1
FMS-3*8
8
8
62RA-414RC101
Right Bracket
1
9
593B-03005NS1
FMS-3*5
4
10
62RA-414LC101
Left Bracket
1
11
62RA-414HP401
Rear Bracket
1
12
599B-03006NS1
IMS 3*6
4
13
62RA-414HP101
Rack HP
2
14
594B-W3008NS1
BMS-W-3*8
2
15
62RA-414HP301
Top Bracket
1
16
5320-00403001
SR-3S
1
GRA-413 and GRA-414 Assembly Manual
C. Removing the handle and Feet from the Instrument:
1. PEL3111. Removing the handle and feet.
2. PEL3041and PEL3021. Removing the handle and feet.
3. PEL3211. Removing the feet.
GRA-413 and GRA-414 Assembly Manual
D. Assembling the Rack to the Instrument:
1. The instrument should be installed horizontally onto the rack. Make sure the
middle bracket lines up with the catch on the underside of the instrument.
Catch Instrument
2. Attach the front bracket to the middle bracket with the rack screws.
Front Bracket Instrument
Rack Screw
3. Attach the rack holding plate (RACK HP) to the groove in the rear bracket and to
the instrument.
Instrument Rear Bracket Rack HP
E. Schematic diagram for the assembly of the rack holding plates to
the rear panel:
62RA-414HP101 (Rack HP)
GRA-413 and GRA-414 Assembly Manual
F. Blank Panel Installation Diagram:
BLANK PANEL (EIA)
BLANK PANEL (JIS)
GRA-413 and GRA-414 Assembly Manual
G. GRA-413 and GRA-414 Front View
GRA-413-E (PEL3211)
GRA-413-J (PEL3211)
GRA-414-E (PEL3021, PEL3041), Half Rack
GRA-414-E (PEL3111), Full Rack
GRA-413 and GRA-414 Assembly Manual
GRA-414-J (PEL3021, PEL3041), Half Rack
GRA-414-J (PEL3111), Full Rack
GRA-413 and GRA-414 Assembly Manual
H. Note:
1. Load weight for GRA-414: Max=20kg.
2. Load weight for GRA-413 not specified.
3. Rack cabinet installation diagram:
4. Precautions for cabinets with L-bracket supports:
For rack cabinets that use L-brackets, please be aware of the size limitations, as
shown above.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

GW Instek GRA-413/414 User manual

GW Instek
Brand
GW Instek
Model
GRA-413/414
Type
User manual

GW Instek GRA-413/414

The GW Instek GRA-413/414 Rack Adapter Panel is designed to mount your instrument into a standard 19-inch rack. It is compatible with both EIA and JIS rack standards and can accommodate instruments with a height of 3U. The panel is made of high-quality steel and has a durable powder-coat finish. It includes all the necessary hardware for mounting your instrument, including rack screws, washers, and nuts.

The GRA-413/414 Rack Adapter Panel is a versatile and convenient way to mount your instrument in a rack. It is perfect for use in laboratories, workshops, and other industrial settings where space is limited.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents