Gamber-Johnson 2015-2020 Ford F-150 and 2017-2022 F-250-550 Super Duty Vertical Console Box Installation guide

Brand: Gamber-Johnson

Model: 2015-2020 Ford F-150 and 2017-2022 F-250-550 Super Duty Vertical Console Box

Type: Installation guide

This manual is also suitable for

Gamber-Johnson 2015-2020 Ford F-150 and 2017-2022 F-250-550 Super Duty Vertical Console Box

This product is designed to provide a secure and convenient storage solution for your vehicle. It features a spacious compartment that can accommodate various items, including:

Tools Electronics Documents Personal belongings

The console box is easy to install and can be mounted in the center console of your vehicle. It includes mounting hardware and instructions to ensure proper installation. Additionally, it comes with USB/AUX and 12V power outlets for charging devices or powering accessories.

Gamber-Johnson 2015-2020 Ford F-150 and 2017-2022 F-250-550 Super Duty Vertical Console Box

This product is designed to provide a secure and convenient storage solution for your vehicle. It features a spacious compartment that can accommodate various items, including:

Tools Electronics Documents Personal belongings

INST-747

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

INSTALLATION INSTRUCTIONS

Product Revision

Printing Spec:

PS-001

Vertical Console Box - Ford F150 2015+, F250 2017+

7160-0875

Form

Panel

Instrument

Center

1. Remove the (2) 7mm screws in the top dash tray near the windshield. If the vehicle

instrument panel. See FIG 2.

2. Set the dash tray aside and remove the (2) 7mm screws in the top of the center

7mm screws. Remove the top dash tray. See FIG 1.

has a speaker in the top dash tray, carefully remove the speaker cover to access the

Removed

Speaker Cover

FIG 1 - Top Tray w/ Optional Speaker

(2) 7mm Screws

(2) 7mm

Screws

FIG 2 - Top Inst. Panel Screws

HOLD DOWN

BOTTOM FILL PANEL

MOUNTING TAB

12V ACCESSORY

USB/AUX

MOUNTING TAB

3. Remove the 7mm screw on the driver's side of the bottom trim panel.

Carefully remove the bottom trim panel. See FIG 3.

Bottom Trim Panel

Side Panel

Compartment

Panel

Center Instrument

Panel

Remove (1) 7mm

Screw, This Side

FIG 3 - Dash Panels

4. Carefully remove the center instrument panel and both side panels.

5. Remove the compartment panel by removing the top (2) 7mm screws

and (2) 10mm screws, one on each side. This hardware will be reused to

attach the console box. See FIG 4.

10mm Screw

(2) 7mm Screws

10mm Screw

USB/AUX Module 12V Acc. Module

FIG 4 - Compartment Panel

7. Unplug, then remove the USB and 12V accessory modules from the storage

compartment panel. Note: the 12V accessory module must be removed in two

pieces, first the metal cylinder, then the plastic face.

8. Place the 12V accessory and USB/AUX modules into the console box. Use the

rectangular spacer taped inside the console box to fill the gap on the backside of the

USB/AUX module. See FIG 5 for detail. Once the spacer is snapped onto the back, the

module should fit snuggly into the console box. Reattach the wires once installed into

the box.

9. Place the console box into position aligning the mounting tabs with the mounts

used for the lower compartment panel. Install the console box using the (2)

10mm screws and (2) 7mm screws removed in step 6.

NOTE: Some downward pressure to push the box into the carpet or floor mat may

be needed to mount the box low enough in the top slots for the instrument panel

to fit above the console box.

10. Reinstall the panels in the reverse order. The bottom trim panel is left out unless

modified.

11. OPTIONAL: If installed in a regular cab model or an extended cab without rear

heating ducts the bottom fill panel can be installed to fill the gap between the

console and the transmission hump. See FIG 6. The filler panel will ship attached

with the necessary hardware.

NOTE: if the flip out center seat/console cup holder is to be used in extended cab

models a shorter regular cab cup holder will need to be purchased. See FIG 7.

No Filler

Panel

Required

FIG 6 - Installed Console Box

Reg. Cab Ext. Cab

FIG 7 - Cup Holder Comparison

Rectangular

Spacer

Backside of

USB/AUX Cut Out

USB/AUX Module

Snapped in From Front

FIG 5 - USB/AUX Module Spacer Detail

Gamber-Johnson 2015-2020 Ford F-150 and 2017-2022 F-250-550 Super Duty Vertical Console Box Installation guide

Brand: Gamber-Johnson

Model: 2015-2020 Ford F-150 and 2017-2022 F-250-550 Super Duty Vertical Console Box

Type: Installation guide

This manual is also suitable for

Gamber-Johnson 2015-2020 Ford F-150 and 2017-2022 F-250-550 Super Duty Vertical Console Box

This product is designed to provide a secure and convenient storage solution for your vehicle. It features a spacious compartment that can accommodate various items, including:

Tools Electronics Documents Personal belongings

Download PDF

report

Gamber-Johnson 2015-2020 Ford F-150 and 2017-2022 F-250-550 Super Duty Vertical Console Box Installation guide

This manual is also suitable for

Gamber-Johnson 2015-2020 Ford F-150 and 2017-2022 F-250-550 Super Duty Vertical Console Box Installation guide

Related papers

Other documents