Gamber-Johnson Samsung Galaxy Tab Active2/Active3 Mobility Bundle, 7170-0988 User guide

  • Hello! I am an AI chatbot trained to assist you with the Gamber-Johnson Samsung Galaxy Tab Active2/Active3 Mobility Bundle User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GAMBERJOHNSON.COM
3001 Borham Avenue, Stevens Point, WI 54481
800.487.9220 | [email protected]
RUGGED. RELIABLE. RESPONSIVE.
RUGGED. RELIABLE. RESPONSIVE.
User Guide | Mobility Bundle for the Samsung Galaxy Tab Ative2
052020
Your Galaxy Tab Active2 Mobility Bundle is uniquely
designed to provide ease in transportation for your Galaxy
Tab Active2 device.
MOBILITY BUNDLE FOR
THE SAMSUNG GALAXY
TAB ACTIVE2
1. Acetal O-Rings
2. Ergonomic Handle
3. Quick Connect Clips
4. Shoulder Strap
5. Spring Clip
FEATURES
4
3
5
1
3
2
1
INSTALLATION
Before installation, please ensure that both the quick connect clips (3) are disconnected.
1
GAMBERJOHNSON.COM
3001 Borham Avenue, Stevens Point, WI 54481
800.487.9220 | [email protected]
RUGGED. RELIABLE. RESPONSIVE.
RUGGED. RELIABLE. RESPONSIVE.
User Guide | Mobility Bundle for the Samsung Galaxy Tab Ative2
052020
Before installation, please remove the Tab Active2 and stylus from the outer case and set them safely to the
side. The mobility bundle will be installed to the outer case.
2
Start by feeding the cord of the quick connect clip (3) into the stylus loop slot shown above. With the cord
through the slot, loop the cord back around the plastic buckle on the quick connect clip. Pull on the buckle to
tighten the quick connect cord to the device.
3
4
Next, feed the cord of the quick connect clip (3) into the cord slots built into the outer case. This will require
the assistance of a small screwdriver (not included). Feed the cord inward and then outward (as shown
above). With the cord through the slots, loop the cord back around the plastic buckle on the quick connect clip.
Pull on the buckle to tighten the quick connect cord to the device.
GAMBERJOHNSON.COM
3001 Borham Avenue, Stevens Point, WI 54481
800.487.9220 | [email protected]
RUGGED. RELIABLE. RESPONSIVE.
RUGGED. RELIABLE. RESPONSIVE.
User Guide | Mobility Bundle for the Samsung Galaxy Tab Ative2
052020
5
With the quick connect clips (3) installed, carefully install the Tab Active2 and stylus back into the outer case.
The handle assembly (2) is now ready to be installed (see next page for Step 6).
6
To install, connect both of the quick connect clips (3) with the plastic buckles. Your mobility bundle is now
installed.
1. When taking a photo with the rear facing camera built into the Galaxy
Tab Active2, users can disconnect the mobility bundle with the quick
connect clips (3). The quick connect clips allow for easy and fast
installation at any time.
2. The included Shoulder Strap (4) is adjustable via a Webbing Glide
located near the end of the strap. The Shoulder Strap is also
removable via Spring Clips (5) and Acetal O-Rings (1).
3. The Mobility Bundle is designed to be small and out of the way so it
can remain on your device at all times.
ADDITIONAL INFORMATION
WARRANTY
InfoCase products are dynamic, consistently improved and reinvented to bring you the best products on the market. We
use only the highest quality materials to meet your mobile technology demands.
InfoCase oers a 1 year warranty on defects and workmanship on this Fieldmate product. Visit InfoCase.com/warranty or
call 1-800-248-4844 to obtain more information on the InfoCase warranty.
/