2. Toro
  3. Replacement Hood Kit, XLS Lawn Tractor

Toro Replacement Hood Kit, XLS Lawn Tractor Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Replacement Hood Kit, XLS Lawn Tractor Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3373-130RevA
ReplacementHoodKit
XLSLawnTractor
ModelNo.121-4011
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Hood1
Flatwasher2
1
Screwselftapping1/4x0.75
12
Installhood
1
Partsneededforthisprocedure:
1Hood
2Flatwasher
12
Screwselftapping1/4x0.75
Procedure
1.Raisetheexistinghood(Figure1).
2.Disconnectthewireharnesslocatedontheleftside.
3.Removethe4screwssecuringthehoodtotheframe.
Removethehood.Savethesescrews.
g018208
1
2
3
4
Figure1
1.Raisedhood3.Frame
2.Wireharness
4.Screwssecuringthehood
4.Removethe4screwssecuringtheairducttothe
existinghood.Removetheairductanddiscardscrews
(Figure2).
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
2
3
4
6
7
9
8
7
6
4
g0118215
5
5
3
1
Figure2
1.Airduct
6.Outsidescrewsecuring
theheadlight(savethese
existingscrews)
2.Selftappingscrew7.Selftappingscrew
securingthetrimand
thefrontendassembly
3.Trim8.Insidescrewsecuringthe
headlight(discardthese
screws)
4.Selftappingscrew
securingthetrim(install
thenewatwashershere)
9.Frontendassembly
5.Headlight
5.Removethe6screwssecuringthetrimandfrontend
assembly.Discardthescrewsandremovethetrim.
6.Removethe2outsidescrewssecuringtheheadlights.
Savethesescrews.
7.Removethe2insidescrewsanddiscardthescrews.
8.Removetheheadlightsandfrontendassembly.
9.Installtheexistingairducttothenewhoodusingthe4
newself-tappingscrews.
10.Installtheexistingtrim,headlights,andfrontgrill
assemblytothenewhoodusingthe2newatwashers,
8newselftappingscrews,andtwoexistingscrews
securingtheoutsideareaoftheheadlights.
Note:Installthenewself-tappingscrewsonlyin
placesthatthreaddirectlyintothehood.Usethe
existinghardwareintheotherareas.
11.Tightenallofthescrewssecuringtheairduct,trim,
frontendassembly,andheadlightsto20–28in-lb.
12.Installthenewhoodtotheframeusingtheexisting
screws.
13.Installthewireharness.
14.Closethehood.
2
/