2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Toro
  6. Deck Footlift Assist Kit, TimeCutter Riding Mower
Deck Footlift Assist Kit, TimeCutter Riding Mower

Toro Deck Footlift Assist Kit, TimeCutter Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Deck Footlift Assist Kit, TimeCutter Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of the Toro Deck Footlift Assist Kit?
    Which TimeCutter Riding Mower models is the kit compatible with?
    What parts are included in the kit?
    Is the installation process difficult?
    What safety precautions should be taken before installing the kit?
    Does the kit come with a warranty?
FormNo.3436-785RevA
DeckFootliftAssistKit
TimeCutter
®
RidingMower
ModelNo.140-2059
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemachine.
2
Nopartsrequired
–
RemovetheMyRideguard.
Liftpedal
1
Footpeg1
Footliftplate
1
Carriagebolt(5/16x1-1/4inches)
2
Locknut(5/16inch)
2
Thrustwasher2
Spacer(3/8inch)
1
Spacer(5/16inch)
2
Link1
Carriagebolt(3/8x1inch)
1
Locknut(5/16inch)
2
Shoulderbolt(3/8x7/8inch)
2
Locknut(3/8inch)
3
Bolt(3/8x1inch)
1
Washer1
3
Nylonwasher1
Installthebrackets.
4
Nopartsrequired
–
Completethesetup.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3436-785*A
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurfaceand
disengagethebladecontrolswitch.
2.Movethemotioncontrolleversoutwardtothe
parkposition,stoptheengine,removethekey,
andwaitforallmovingpartstostopbefore
leavingtheoperatingposition.
3.Lowerthemowerdecktothelowestcutting
height.
2
RemovingtheMyRide
Guard
NoPartsRequired
Procedure
Note:Thisprocedureisonlyformachineswiththe
MyRideoption.
1.Removetheboltsfromtheframe(Figure1).
2.Slidetheguardtaboutoftheframebymoving
theguardforward(Figure1).
g308639
Figure1
1.Bolt
3.Guardtab
2.Frame
4.Guard
3
InstallingtheFootPedal
Partsneededforthisprocedure:
1
Liftpedal
1Footpeg
1
Footliftplate
2
Carriagebolt(5/16x1-1/4inches)
2
Locknut(5/16inch)
2Thrustwasher
1
Spacer(3/8inch)
2
Spacer(5/16inch)
1Link
1
Carriagebolt(3/8x1inch)
2
Locknut(5/16inch)
2
Shoulderbolt(3/8x7/8inch)
3
Locknut(3/8inch)
1
Bolt(3/8x1inch)
1Washer
1Nylonwasher
Procedure
1.Installthefootpegtotheliftpedalwithabolt
(3/8x1inch);refertoFigure2.
2
2.Installtheliftpedaltothelinkwithashoulder
bolt(3/8x7/8inch)andlocknut(3/8inch);refer
toFigure2.
3.Installtheliftpedaltothesideoftheframewith
ashoulderbolt,nylonwasher,washer,anda
locknut(5/16inch);refertoFigure2.
g308637
Figure2
1.Shoulderbolt(3/8x7/8
inch)
5.Nylonwasher
2.Bolt(3/8x1inch)
6.Washer
3.Liftpedal7.Locknut(3/8inch)
4.Footpeg
8.Shoulderbolt(3/8x7/8
inch)
4.Installthethrustwashersoneachsideofthelift
leverasshownin(Figure3).
Note:Installallthecarriageboltswiththebolt
headsontheinsideofthemachine.
5.Installthefootliftplatetothelinkwith2carriage
bolt(3/8x1inch),2spacers(3/8inch),and2
locknuts(3/8inch);refertoFigure3.
g308638
Figure3
1.Locknut(3/8inch)7.Carriagebolt(3/8x1inch)
2.Footliftplate8.Carriagebolt(5/16x1-1/4
inch)
3.Thrustwasher
9.Locknut(5/16inch)
4.Spacer(3/8inch)10.Liftlever
5.Spacer(5/16inch)11.Thrustwasherbetweenlift
leverandmachine
6.Link
4
CompletingtheSetup
NoPartsRequired
Procedure
1.FormachineswiththeMyRidefeature,slidethe
guardtabintotheframe(Figure1).
2.FormachineswiththeMyRidefeature,install
theboltsintotheframeandguard(Figure1).
3.Usetheheightofcutleverandfootpedalto
raiseandlowerthemowerdeck,checktoseeif
thereisanybinding.Ifso,checktheinstallation.
4.Readjustasnecessary.
3
/