Con-Tact 12F-C6C59-12 User guide

La Mirada, CA tel. 714-736-1000 fax. 714-736-2078 customer service. 800-321-1741 email. [email protected]

CON-TACT LINER

GRIP

Non-Adhesive

SURFACE PREPARATION

Clean surfaces prior to application as necessary.

All surfaces should be dry, clean, and smooth.

CAUTION

Not for use on lacquered or urethane surfaces. Finish damage may occur.

Care should be taken when placed on latex semi-gloss and gloss paints.

Painted areas must be completely cured otherwise the liner may stick to the surface.

Cool and/or humid conditions required a longer curing time.

APPLICATION

Measure area to be covered

Cut to desired size and/or shape

CLEANING AND MAINTENANCE

Washable

Clean with a damp cloth and mild soap if necessary

May be submerged in water with mild soap or detergent

Hand wash

Machine Wash, Gentle or Delicate cycle with mild soap or detergent

Do Not Wring

Machine dryer should not be used.

Lay flat to dry

This manual is also suitable for

Download PDF