Legrand Power Pack and Auxiliary Relay Pack Installation guide
- Type
- Installation guide
All information in this drawing is the property
of The Watt Stopper Inc. and cannot be copied or used
without the written approval of The Watt Stopper Inc.
REV. DESCRIPTION REV. DATE APPROVED
5PERECO#101395-1 S.Chen
Drawn by: SOWINSKI
PLM:
MarCom:
ENG:
Sheet 1 of 1 Scale 1:1
QA:
Title:
the Watt Stopper Inc.
SANTA CLARA, CALIFORNIA
Power Pack and Auxiliary Relay Pack
INSTALLATION INSTRUCTIONS
Drawing #: Original Drwg. Date: Rev.#:
86-0417-00
00 FEB 95
24 APR 03Rev. Date:
7
4 inches
6 inches
MATERIAL: White 16 lb. (60g/m sq)
INK COLOR: Black
6ECO#C00594
12/31/96
7ECO#C00608
4/17/03
NJD
Power Packs and
Auxiliary Relay Pack
Installation Instructions
www.wattstopper.com
Santa Clara, CA 95050
Technical Support: 800.879.8585 • 972.578.1699
86-0417-00r7
CAUTION
TURN POWER OFF AT THE CIRCUIT BREAKER BEFORE
INSTALLING POWER PACKS OR AUXILIARY RELAY PACKS.
ONLY QUALIFIED ELECTRICIANS SHOULD INSTALL THIS UNIT.
The power pack attaches to existing junction boxes.
All low voltage wiring should be at
least 22 gauge wire. All high
voltage connections should be at
least 14 gauge. Always check local
building codes. After initial wiring is
complete, verify that power pack is wired
correctly. Improper wiring can damage the
power pack, lighting system and occupancy
sensor.
Control Output 24VDC
Common
+24VDC
White (Neutral)
Red (Load)
Red (Line)
White
Black
Hot
N
POWER PACK
AUXILIARY
RELAY
PACK
Red (load)Red (line)
OFF switch
Black
Blue
Red
Black
Blue
Switch
Hot
N
Lighting
Load
Lighting
Load
Any 24VDC Sensor
Ceiling or Wall Mount
POWER PACK
MAKE HIGH VOLTAGE
CONNECTIONS INSIDE
J-BOX
-
1
Legrand Power Pack and Auxiliary Relay Pack Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Legrand Power Packs, PWP2120 & PWP2277 Installation guide
-
-
-
-
-
-
Legrand DRLV1 Wireless 0-10V Controller Installation guide
-
-
-