Myard PNP114040 4pk Installation guide

Brand
Myard
Model
PNP114040 4pk
Type
Installation guide
Myard
PNP114040 4x4 (Actual 3.5x3.5) Inches Post Base Cover Skirt
Flange w/Screws for Deck Porch Handrail Railing Support Trim Anchor
(Qty 4, Black)
▼ Please read full description before order. ▼ Perfect for deck supports, porch railing,
hand rails and post holders. Also, can be used as table leg / mailbox post support
brackets.
▼ Fits a nominal standard 4"x 4" post (actual 3.5"x 3.5" dry post on market). ▼
Sanding / trimming may be required depending on post type and little size error.★
POST HEIGHT LIMIT: 60" (5-feet), NOT for roof support ★
▼ Made from paintable durable High-Strength Nylon + Anti-UV + FRP (Fiber Reinforced
Plastic). NO fading, aging, and weakening from sun exposure. UV-resistant.
▼ Stainless Steel 304 screws are included: 8 short screws (installed horizontally) to
post. 12 long screws (vertically) to deck floor board. ▼Thicker & higher post base
bottom for better structural strength on decks.
▼ Clean contemporary style. Re-designed for better looking. Fast & easy post
installation in minutes. ▼ Use with Myard Railing Connectors and Post Caps for match
looking. (search "PNP 115445" and "PNP111902" )
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Myard PNP114040 4pk Installation guide

Brand
Myard
Model
PNP114040 4pk
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents